Skip to contentSkip to conversation

Multiple Mounting of one XFS Partition

DISCUSSION Steffen Knauf 3 participants 3 messages Mar 16, 2009 – Mar 17, 2009

lore
Share & tools
lore
#0 lore raw

Hello,

i have 2 Servers which are connected with a raid via FibreChannel.
Both of them have mounted the same XFS-Partition. But if i change a Filepermission or add some Files at the Partition of server1, the partition of server2 don't show the modifications until i remount the Partitions. I don't know how whether it is a cache Option or something else. Perhaps someone have an idea.
Thanks!

greets

Steffen

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

#1 lore raw
Quoted 3 lines · Steffen Knauf

Hello,

i have 2 Servers which are connected with a raid via FibreChannel.

Unless you have some sort of cluster filesystem, it's not going to work.

Quoted 4 lines

Both of them have mounted the same XFS-Partition. But if i change a Filepermission or add some Files at the Partition of server1, the partition of server2 don't show the modifications until i remount the Partitions.

The changes done by server1 won't be flushed to disk, where they could be seen by server2, till much later, or on unmount.

Quoted 1 line

I don't know how whether it is a cache Option or something else.

That's how any modern filesystem work.

Cheers,
Felix

Quoted 4 lines

Perhaps someone have an idea.
Thanks!

Quoted 8 lines

greets

Steffen

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

#2 lore raw
In reply to Steffen Knauf
Quoted 12 lines · Steffen Knauf

Hello,

i have 2 Servers which are connected with a raid via FibreChannel. Both of them have mounted the same XFS-Partition. But if i change a Filepermission
or add some Files at the Partition of server1, the partition of server2 don't show the modifications
until i remount the Partitions. I don't know how whether it is a cache Option or something else.
Perhaps someone have an idea.
Thanks!

Quoted 1 line

greets

You can't do this. It will corrupt your filesystem; there is *nothing* which will give you coherency between the nodes.

This is what SGI sells CXFS for (for big $$$)

-Eric

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs