use generic pci_assign_unassign_resources
Ben,
We're looking at the fixes you put in place for the various PCI errors and we think this is the solution we need for our system, a GE Fanuc CM6 PPC board (single 8641), but your patches appear to apply either to 2.6.24 or 2.6.25, and we have 2.6.23. Do you know of any similar work done on the 2.6.23 release?
Thanks in advance for any help you can provide,
Signature · 8 lines
Mark J. Takatz Pericle Communications Company 1910 Vindicator Drive, Suite 100 Colorado Springs, CO 80919 Office: (719) 548-1170 Cell: (719) 287-5267 Fax: (719) 548-1211 [email protected]
Quoted 9 lines · Mark Takatz
Ben,
We're looking at the fixes you put in place for the various PCI errors and we think this is the solution we need for our system, a GE Fanuc CM6 PPC board (single 8641), but your patches appear to apply either to 2.6.24 or 2.6.25, and we have 2.6.23. Do you know of any similar work done on the 2.6.23 release?
Thanks in advance for any help you can provide,
No, you would have to backport major chunks of the PCI rework I did in between, along with fixes I did after that. At this stage I would recommend considering an update to 2.6.27 or 2.6.28.
Cheers,
Ben.
Hehe, and that opens up an entirely different can of worms with our board.
Thanks, however.
Mark
Quoted 19 lines · Benjamin Herrenschmidt
Quoted 6 lines · Mark Takatz
Ben,
We're looking at the fixes you put in place for the various PCI errors and we think this is the solution we need for our system, a GE Fanuc CM6 PPC board (single 8641), but your patches appear to apply either to 2.6.24 or 2.6.25, and we have 2.6.23. Do you know of any similar work done on the 2.6.23 release?
Thanks in advance for any help you can provide,
No, you would have to backport major chunks of the PCI rework I did in between, along with fixes I did after that. At this stage I would recommend considering an update to 2.6.27 or 2.6.28.
Cheers,
Ben.
Signature · 8 lines
Mark J. Takatz Pericle Communications Company 1910 Vindicator Drive, Suite 100 Colorado Springs, CO 80919 Office: (719) 548-1170 Cell: (719) 287-5267 Fax: (719) 548-1211 [email protected]