The next step: nfsvers=4
Subsystems (2)
As I see it, the next step to seamlessly move to V4 as the default is to make 'mount -o nfsvers=4' actually do a v4 mount...
There are two obvious place we can make this change. In the kernel and/or in the mount command...
Looking at the kernel, since v3 and v4 truly two different file systems its seems a bit late for the nfs_get_sb() to all of sudden have to change file system type. Meaning when nfs_get_sb() sees the "nfsvers=4" somehow it would have to back out and call nfs4_get_sb(), which obviously is a bit hacky....
Now I guess we could have one nfs_get_sb() for both v3 and v4. Where the nfs_get_sb() could peek into the options data to see which version is needed. This would also mean the mount command would always have to set a version so when the "nfsvers=" options is not set, the kernel would know which version to use. Again, this feels a bit hacky as well but doable...
At least to me, what seems like the best option is to have the mount.nfs binary early on intercept "nfsvers=4" option and then change the fs_type to "nfs4", which would allow everything to "trickle down" as it does today... Again to me, that seem like the least intrusive way to do it...
Comments? Is there other ways?
steved.
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 27 lines
-----Original Message-----
From: Steve Dickson [mailto:[email protected]]
Sent: Thursday, March 19, 2009 9:18 AM
To: linux NFS Mailing list
Subject: The next step: nfsvers=4As I see it, the next step to seamlessly move to V4 as the default is to make 'mount -o nfsvers=4' actually do a v4 mount...
There are two obvious place we can make this change. In the kernel and/or in the mount command...
Looking at the kernel, since v3 and v4 truly two different file systems its seems a bit late for the
nfs_get_sb()to all of sudden have to change file system type. Meaning whennfs_get_sb()sees the "nfsvers=4" somehow it would have to back out and callnfs4_get_sb(), which obviously is a bit hacky....Now I guess we could have one
nfs_get_sb()for both v3 and v4. Where thenfs_get_sb()could peek into the options data to see which version is needed. This would also mean the mount command would always have to set a version so when the "nfsvers=" options is not set, the kernel would know which version to use. Again, this feels a bit hacky as well but doable...
Quoted 7 lines
At least to me, what seems like the best option is to have the mount.nfs binary early on intercept "nfsvers=4" option and then change the
fs_typeto "nfs4", which would allow everything to "trickle down" as it does today... Again to me, that seem like the least intrusive way to do it...Comments? Is there other ways?
Whichever way it's done, if v4 becomes the default, don't forget to also make the default behavior be that the system will fall back and try a v3 mount if v4 isn't available. Otherwise you'll break a huge percentage of your user base. Of course then you also have to deal with the semantics of how to specifify "only v4" vs. "try v4 first and fall back".
Quoted 10 lines
steved.
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Quoted 33 lines · Daniel
Quoted 33 lines
-----Original Message-----
From: Steve Dickson [mailto:[email protected]]
Sent: Thursday, March 19, 2009 9:18 AM
To: linux NFS Mailing list
Subject: The next step: nfsvers=4As I see it, the next step to seamlessly move to V4 as the default is to make 'mount -o nfsvers=4' actually do a v4 mount...
There are two obvious place we can make this change. In the kernel and/or in the mount command...
Looking at the kernel, since v3 and v4 truly two different file systems its seems a bit late for the
nfs_get_sb()to all of sudden have to change file system type. Meaning whennfs_get_sb()sees the "nfsvers=4" somehow it would have to back out and callnfs4_get_sb(), which obviously is a bit hacky....Now I guess we could have one
nfs_get_sb()for both v3 and v4. Where thenfs_get_sb()could peek into the options data to see which version is needed. This would also mean the mount command would always have to set a version so when the "nfsvers=" options is not set, the kernel would know which version to use. Again, this feels a bit hacky as well but doable...At least to me, what seems like the best option is to have the mount.nfs binary early on intercept "nfsvers=4" option and then change the
fs_typeto "nfs4", which would allow everything to "trickle down" as it does today... Again to me, that seem like the least intrusive way to do it...
Quoted 8 lines
Quoted 1 line
Comments? Is there other ways?
Whichever way it's done, if v4 becomes the default, don't forget to also make the default behavior be that the system will fall back and try a v3 mount if v4 isn't available. Otherwise you'll break a huge percentage of your user base. Of course then you also have to deal with the semantics of how to specifify "only v4" vs. "try v4 first and fall back".
No worries... falling back to v3/v2 will be the will definitely happen before the switch is made...
This was this is reason I'm pushing for a mount configuration file. So the semantics of which version is or is not tried can be defined locally...
steved.
A message that is not in the archive (sent off-list or not yet received): 7A24DF798E223B4C9864E8F92E8C93EC026043D3-hX7t0kiaRRpT+ZUat5FNkAK/[email protected]
Quoted 25 lines · Daniel
Quoted 25 lines
-----Original Message-----
From: Steve Dickson [mailto:[email protected]]
Sent: Thursday, March 19, 2009 9:18 AM
To: linux NFS Mailing list
Subject: The next step: nfsvers=4As I see it, the next step to seamlessly move to V4 as the default is to make 'mount -o nfsvers=4' actually do a v4 mount...
There are two obvious place we can make this change. In the kernel and/or in the mount command...
Looking at the kernel, since v3 and v4 truly two different file systems its seems a bit late for the
nfs_get_sb()to all of sudden have to change file system type. Meaning whennfs_get_sb()sees the "nfsvers=4" somehow it would have to back out and callnfs4_get_sb(), which obviously is a bit hacky....Now I guess we could have one
nfs_get_sb()for both v3 and v4. Where thenfs_get_sb()could peek into the options data to see which version is needed. This would also mean the mount command would always have to set a version so when the "nfsvers=" options is not set, the kernel would know which version to use. Again, this feels a bit hacky as well but doable...
Quoted 7 lines
Quoted 7 lines
At least to me, what seems like the best option is to have the mount.nfs binary early on intercept "nfsvers=4" option and then change the
fs_typeto "nfs4", which would allow everything to "trickle down" as it does today... Again to me, that seem like the least intrusive way to do it...Comments? Is there other ways?
Having the mount.nfs command translate sounds like a pretty easy thing to prototype.
Quoted 6 lines
Whichever way it's done, if v4 becomes the default, don't forget to also make the default behavior be that the system will fall back and try a v3 mount if v4 isn't available. Otherwise you'll break a huge percentage of your user base. Of course then you also have to deal with the semantics of how to specifify "only v4" vs. "try v4 first and fall back".
Today, specifying vers=3 means "I want vers=3 or nothing". Not specifying any version means the mount command can choose which version to use based on what both sides support.
If no vers= option is specified, I don't think it would be difficult for the text-based mount command to try a "nfs4" mount first, and if that fails try an "nfs" mount.
Steve, would you like me to provide a prototype mount.nfs command that handles this?
--
Chuck Lever
chuck[dot]lever[at]oracle[dot]com
Quoted 32 lines · Chuck Lever
Quoted 31 lines · Daniel
Quoted 31 lines
-----Original Message-----
From: Steve Dickson [mailto:[email protected]]
Sent: Thursday, March 19, 2009 9:18 AM
To: linux NFS Mailing list
Subject: The next step: nfsvers=4As I see it, the next step to seamlessly move to V4 as the default is to make 'mount -o nfsvers=4' actually do a v4 mount...
There are two obvious place we can make this change. In the kernel and/or in the mount command...
Looking at the kernel, since v3 and v4 truly two different file systems its seems a bit late for the
nfs_get_sb()to all of sudden have to change file system type. Meaning whennfs_get_sb()sees the "nfsvers=4" somehow it would have to back out and callnfs4_get_sb(), which obviously is a bit hacky....Now I guess we could have one
nfs_get_sb()for both v3 and v4. Where thenfs_get_sb()could peek into the options data to see which version is needed. This would also mean the mount command would always have to set a version so when the "nfsvers=" options is not set, the kernel would know which version to use. Again, this feels a bit hacky as well but doable...At least to me, what seems like the best option is to have the mount.nfs binary early on intercept "nfsvers=4" option and then change the
fs_typeto "nfs4", which would allow everything to "trickle down" as it does today... Again to me, that seem like the least intrusive way to do it...
Quoted 4 lines
Quoted 1 line
Quoted 1 line
Comments? Is there other ways?
Having the mount.nfs command translate sounds like a pretty easy thing to prototype.
Yes.. I agree...
Quoted 12 lines
Quoted 7 lines
Whichever way it's done, if v4 becomes the default, don't forget to also make the default behavior be that the system will fall back and try a v3 mount if v4 isn't available. Otherwise you'll break a huge percentage of your user base. Of course then you also have to deal with the semantics of how to specifify "only v4" vs. "try v4 first and fall back".
Today, specifying vers=3 means "I want vers=3 or nothing". Not specifying any version means the mount command can choose which version to use based on what both sides support.
Quoted 6 lines
If no vers= option is specified, I don't think it would be difficult for the text-based mount command to try a "nfs4" mount first, and if that fails try an "nfs" mount.
Steve, would you like me to provide a prototype mount.nfs command that handles this?
Well I was thinking more of lets walk before we run... meaning... lets just get the 'nfsvers=4' working and accepted. Then deal with the v4/v3/v2 fall back in the next patch set...
As you say... the prototype looks to be pretty easy... so let me take a crack at it... besides... you are making some good progress with IPV6 code... I don't think this should get in the way of that...
steved.
steved.
Quoted 46 lines · Chuck Lever
Quoted 25 lines · Daniel
Quoted 25 lines
-----Original Message-----
From: Steve Dickson [mailto:[email protected]]
Sent: Thursday, March 19, 2009 9:18 AM
To: linux NFS Mailing list
Subject: The next step: nfsvers=4As I see it, the next step to seamlessly move to V4 as the default is to make 'mount -o nfsvers=4' actually do a v4 mount...
There are two obvious place we can make this change. In the kernel and/or in the mount command...
Looking at the kernel, since v3 and v4 truly two different file systems its seems a bit late for the
nfs_get_sb()to all of sudden have to change file system type. Meaning whennfs_get_sb()sees the "nfsvers=4" somehow it would have to back out and callnfs4_get_sb(), which obviously is a bit hacky....Now I guess we could have one
nfs_get_sb()for both v3 and v4. Where thenfs_get_sb()could peek into the options data to see which version is needed. This would also mean the mount command would always have to set a version so when the "nfsvers=" options is not set, the kernel would know which version to use. Again, this feels a bit hacky as well but doable...Quoted 7 lines
Quoted 7 lines
At least to me, what seems like the best option is to have the mount.nfs binary early on intercept "nfsvers=4" option and then change the
fs_typeto "nfs4", which would allow everything to "trickle down" as it does today... Again to me, that seem like the least intrusive way to do it...Comments? Is there other ways?
Having the mount.nfs command translate sounds like a pretty easy thing to prototype.
Quoted 8 lines
Whichever way it's done, if v4 becomes the default, don't forget to also
make the default behavior be that the system will fall back and try a v3
mount if v4 isn't available. Otherwise you'll break a huge percentage of your user base. Of course then you also have to deal with the semantics of how to specifify "only v4" vs. "try v4 first and fall back".
Quoted 7 lines
Today, specifying vers=3 means "I want vers=3 or nothing". Not specifying any version means the mount command can choose which version to use based on what both sides support.
If no vers= option is specified, I don't think it would be difficult for the text-based mount command to try a "nfs4" mount first, and if that fails try an "nfs" mount.
Agreed.
That's pretty much what we planned to do in the future also for minorversion=1, after discussing this also with Trond. The principle was that the policy for choosing what versions to try and in which order should be determined by the user mode utilities since one can think of customers that would only want to use nfsv4.1 for its exactly once semantics, or others that would want to start with 4.0 and fall back to 3 and 2 since trying 4.1 might break their servers, etc.
I think that if no version is specified all versions that the client supports should be tried, highest first. Otherwise mount.nfs should try only the specified version.
For implementing more complex policies, maybe we can extend the command syntax to accept a range and/or an ordered list of versions to try.
Benny
Quoted 11 lines
Steve, would you like me to provide a prototype mount.nfs command that handles this?
--
Chuck Lever
chuck[dot]lever[at]oracle[dot]com
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 65 lines · Benny Halevy
Quoted 46 lines · Chuck Lever
Quoted 25 lines · Daniel
Quoted 25 lines
-----Original Message-----
From: Steve Dickson [mailto:[email protected]]
Sent: Thursday, March 19, 2009 9:18 AM
To: linux NFS Mailing list
Subject: The next step: nfsvers=4As I see it, the next step to seamlessly move to V4 as the default is to make 'mount -o nfsvers=4' actually do a v4 mount...
There are two obvious place we can make this change. In the kernel and/or in the mount command...
Looking at the kernel, since v3 and v4 truly two different file systems its seems a bit late for the
nfs_get_sb()to all of sudden have to change file system type. Meaning whennfs_get_sb()sees the "nfsvers=4" somehow it would have to back out and callnfs4_get_sb(), which obviously is a bit hacky....Now I guess we could have one
nfs_get_sb()for both v3 and v4. Where thenfs_get_sb()could peek into the options data to see which version is needed. This would also mean the mount command would always have to set a version so when the "nfsvers=" options is not set, the kernel would know which version to use. Again, this feels a bit hacky as well but doable...Quoted 7 lines
Quoted 7 lines
At least to me, what seems like the best option is to have the mount.nfs binary early on intercept "nfsvers=4" option and then change the
fs_typeto "nfs4", which would allow everything to "trickle down" as it does today... Again to me, that seem like the least intrusive way to do it...Comments? Is there other ways?
Having the mount.nfs command translate sounds like a pretty easy thing to prototype.
Quoted 8 lines
Whichever way it's done, if v4 becomes the default, don't forget to also
make the default behavior be that the system will fall back and try a v3
mount if v4 isn't available. Otherwise you'll break a huge percentage of your user base. Of course then you also have to deal with the semantics of how to specifify "only v4" vs. "try v4 first and fall back".Quoted 7 lines
Today, specifying vers=3 means "I want vers=3 or nothing". Not specifying any version means the mount command can choose which version to use based on what both sides support.
If no vers= option is specified, I don't think it would be difficult for the text-based mount command to try a "nfs4" mount first, and if that fails try an "nfs" mount.
Agreed.
That's pretty much what we planned to do in the future also for minorversion=1, after discussing this also with Trond. The principle was that the policy for choosing what versions to try and in which order should be determined by the user mode utilities since one can think of customers that would only want to use nfsv4.1 for its exactly once semantics, or others that would want to start with 4.0 and fall back to 3 and 2 since trying 4.1 might break their servers, etc.
Quoted 3 lines
I think that if no version is specified all versions that the client supports should be tried, highest first. Otherwise mount.nfs should try only the specified version.
One nit is that the set of mount options supported by nfs4 is different than the set supported by nfs. clientaddr= is supported by nfs4, but not by nfs, for example. I believe that nocto is not supported by nfs4. The mountproto option is only supported by nfs.
If no vers= is specified and only NFSv4 is available on the server, but something like "nocto" shows up on the command line mount options, do we:
a) fail the mount, or
b) ignore the nocto option
a) seems like the least surprising behavior.
What about "proto=udp" ? Linux supports UDP for NFSv4, though other server implementations probably don't. If that's specified on a mount command line without a vers= option, what version should we choose?
Quoted 3 lines
For implementing more complex policies, maybe we can extend the command syntax to accept a range and/or an ordered list of versions to try.
Steve mentioned /etc/default/nfs on Solaris. I could see /etc/sysconfig/nfs on Linux containing a couple of lines defining the range of allowable NFS versions, if we think this is necessary. This is a simple pre-existing file, and has little potential for introducing negative side-effects.
--
Chuck Lever
chuck[dot]lever[at]oracle[dot]com
Quoted 10 lines · Chuck Lever
Quoted 3 lines · Benny Halevy
I think that if no version is specified all versions that the client supports should be tried, highest first. Otherwise mount.nfs should try only the specified version.
One nit is that the set of mount options supported by nfs4 is different than the set supported by nfs. clientaddr= is supported by nfs4, but not by nfs, for example. I believe that nocto is not supported by nfs4. The mountproto option is only supported by nfs.
Quoted 8 lines
If no vers= is specified and only NFSv4 is available on the server, but something like "nocto" shows up on the command line mount options, do we:
a) fail the mount, or
b) ignore the nocto optiona) seems like the least surprising behavior.
I think the "sloppy" option might be relevant here too.
While we're on the subject of sloppy, what about the automounter? It has always been an issue to deploy automounter maps which are shared by diverse client populations - there are significant issues for older Linux clients, and newer Solaris ones for that matter, with NFSv4.
I would strongly suggest touching and/or changing as few options as possible, and paying close attention to the results with legacy or generic configurations on new kernels. The more lenient, the better IMO, except where specific options require specific actions.
Tom.
A message that is not in the archive (sent off-list or not yet received): 49c29203.85c2f10a.098d.17b5-ATjtLOhZ0NVl57MIdRCFDg@public.gmane.org
Quoted 5 lines · Tom Talpey
I would strongly suggest touching and/or changing as few options as possible, and paying close attention to the results with legacy or generic configurations on new kernels. The more lenient, the better IMO, except where specific options require specific actions.
I agree with this... Being "backwards compatible" is imperative. And allowing people to configure things to best fit their environment is something else we should maintain and possibly improve on...
steved.
Quoted 14 lines · Tom Talpey
Quoted 4 lines · Chuck Lever
Quoted 3 lines · Benny Halevy
I think that if no version is specified all versions that the client supports should be tried, highest first. Otherwise mount.nfs should try only the specified version.
Quoted 8 lines
One nit is that the set of mount options supported by nfs4 is different than the set supported by nfs. clientaddr= is supported by nfs4, but not by nfs, for example. I believe that nocto is not supported by nfs4. The mountproto option is only supported by nfs.
If no vers= is specified and only NFSv4 is available on the server, but something like "nocto" shows up on the command line mount options, do we:
a) fail the mount, or
b) ignore the nocto optiona) seems like the least surprising behavior.
Quoted 8 lines
I think the "sloppy" option might be relevant here too.
While we're on the subject of sloppy, what about the automounter? It has always been an issue to deploy automounter maps which are shared by diverse client populations - there are significant issues for older Linux clients, and newer Solaris ones for that matter, with NFSv4.
I ran into this very situation today which caused me to go back through the archive and find this thread. Hopefully it isn't too late to add my two cents.
I want to begin testing nfsv4 in our environment, we rely heavily on autofs, and have a mixed OS environment, and some servers support v4, while others don't.
Most clients should continue to mount with v3, while a few select test machines should mount with v4 if the server supports it.
OSX and (i think) Solaris seem to use fstype=nfs and [nfs]vers=2,3,4 to specify the nfs version. Linux on the other hand, requires that I set fstype=nfs4, and will fail to mount if [nfs]vers is present.
If nfsvers was just ignored or better yet, was honored (if I set fstype=nfs, and nfsvers=4, I don't really care that you change fstype to nfs4 on me under the covers), it would eliminate one hurdle in the quest for a unified automount map (at least in our environment).
-kevin
Quoted 11 lines
I would strongly suggest touching and/or changing as few options as possible, and paying close attention to the results with legacy or generic configurations on new kernels. The more lenient, the better IMO, except where specific options require specific actions.
Tom.
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 5 lines · Chuck Lever
If no vers= is specified and only NFSv4 is available on the server, but something like "nocto" shows up on the command line mount options, do we:
a) fail the mount, or
b) ignore the nocto option
I would say ignore this particular option... since, in a sense, v4 give you this option by default due to delegations... but point well taken... The mapping of v3 to v4 and visa versa will have to be addressed... I would guess in the mount command...
Quoted 6 lines
a) seems like the least surprising behavior.
What about "proto=udp" ? Linux supports UDP for NFSv4, though other server implementations probably don't. If that's specified on a mount command line without a vers= option, what version should we choose?
I think people just want things to work... so if they specify only UDP and the server supports V4, we give them V4/TCP. If they REALLY want UDP, they would have to specify 'nfsvers=3,udp'.
Or, if there was an mount configuration file, they could specify the MAX_VERSION to be 3 and then -o udp mounts work as expected...
Quoted 10 lines
Quoted 4 lines
For implementing more complex policies, maybe we can extend the command syntax to accept a range and/or an ordered list of versions to try.
Steve mentioned
/etc/default/nfson Solaris. I could see/etc/sysconfig/nfson Linux containing a couple of lines defining the range of allowable NFS versions, if we think this is necessary. This is a simple pre-existing file, and has little potential for introducing negative side-effects.
The /etc/sysconfig/nfs is a distro only file... Meaning I know of only one distro that uses that file.. So I would tend to shy away from putting anything in that...
steved.
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 25 lines
-----Original Message-----
From: Steve Dickson [mailto:[email protected]]
Sent: Friday, March 20, 2009 4:50 AM
To: Chuck Lever
Cc: Benny Halevy; Linux NFS Mailing List
Subject: Re: The next step: nfsvers=4Quoted 2 lines · Chuck Lever
If no vers= is specified and only NFSv4 is available on the server, but something like "nocto" shows up on the command line
mount options, do we:
Quoted 3 lines
a) fail the mount, or
b) ignore the nocto optionI would say ignore this particular option... since, in a sense, v4 give you this option by default due to delegations... but point well taken... The mapping of v3 to v4 and visa versa will have to be addressed... I would guess in the mount command...
Quoted 3 lines
a) seems like the least surprising behavior.
Quoted 8 lines
Quoted 1 line
What about "proto=udp" ? Linux supports UDP for NFSv4,
though other
Quoted 1 line
server implementations probably don't. If that's specified
on a mount
Quoted 1 line
command line without a vers= option, what version should we choose?
I think people just want things to work... so if they specify only UDP and the server supports V4, we give them V4/TCP. If they REALLY want UDP, they would have to specify 'nfsvers=3,udp'.
But, and this is a poor example, they REALLY want v4 and UDP? There should be consistency in the way rules are applied. If specifying vers=x requires the mount to match version x exactly, then imho, proto=y should only succeed with protocol y. There should be a way for the user to specify exactly what they want, and fail if they can't have it. Similarly, if someone specifies sec=krb5p, you wouldn't want to fall back to sec=sys :-)
Quoted 29 lines
Or, if there was an mount configuration file, they could specify the
MAX_VERSIONto be 3 and then -o udp mounts work as expected...Quoted 3 lines
Quoted 3 lines
For implementing more complex policies, maybe we can extend the command syntax to accept a range and/or an ordered list of
versions
Quoted 4 lines
Quoted 1 line
to try.
Steve mentioned
/etc/default/nfson Solaris. I could see/etc/sysconfig/nfson Linux containing a couple of linesdefining the
Quoted 1 line
range of allowable NFS versions, if we think this is
necessary. This
Quoted 2 lines
is a simple pre-existing file, and has little potential for introducing negative side-effects.
The
/etc/sysconfig/nfsis a distro only file... Meaning I know of only one distro that uses that file.. So I would tend to shy away from putting anything in that...steved.
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Quoted 13 lines · Steve Dickson
Quoted 5 lines · Chuck Lever
If no vers= is specified and only NFSv4 is available on the server, but something like "nocto" shows up on the command line mount options, do we:
a) fail the mount, or
b) ignore the nocto optionI would say ignore this particular option... since, in a sense, v4 give you this option by default due to delegations... but point well taken... The mapping of v3 to v4 and visa versa will have to be addressed... I would guess in the mount command...
Quoted 2 lines
a) seems like the least surprising behavior.
Quoted 9 lines
Quoted 3 lines
What about "proto=udp" ? Linux supports UDP for NFSv4, though other server implementations probably don't. If that's specified on a mount command line without a vers= option, what version should we choose?
I think people just want things to work... so if they specify only UDP
and the server supports V4, we give them V4/TCP. If they REALLY want UDP, they would have to specify 'nfsvers=3,udp'.Or, if there was an mount configuration file, they could specify the
MAX_VERSIONto be 3 and then -o udp mounts work as expected...
I would agree that things should just work as much as possible. I would think that the options that aren't applicable should be ignored, and the
values that are known to be incorrect should be fixed if possible.
More likely than not, I care that my mount succeeds. Once that happens, I begin to care how it succeeded, and can go figure out where I made a mistake and how I ended up with v4/tcp when I really wanted udp and didn't care which nfs version I use.
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
For implementing more complex policies, maybe we can extend the command syntax to accept a range and/or an ordered list of versions to try.
Steve mentioned
/etc/default/nfson Solaris. I could see/etc/sysconfig/nfson Linux containing a couple of lines defining the range of allowable NFS versions, if we think this is necessary. This is a simple pre-existing file, and has little potential for introducing negative side-effects.
I like the idea of having a file that allows me to specify or default values, or acceptable ranges for the various mount options. I'd also like to be able to specify overrideable options in the automount maps where the right-most option wins.
-kevin
Quoted 8 lines
The
/etc/sysconfig/nfsis a distro only file... Meaning I know of only one distro that uses that file.. So I would tend to shy away from putting anything in that...steved.
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html