Skip to contentSkip to conversation

Help w/ATSC tuner (kworld 120)

DISCUSSION stuart 1 participant 1 message Mar 19, 2009 Media (V4L/DVB)

lore
Share & tools
lore

stuart

author
#0 lore raw

Hi...

I know the v4l support of (what I think is the newest) Kworld 120 is not 100 % (for instance I don't think you can switch between NTSC and ATSC w/o a power cycle -or- use the remote control). However, I had been using it for months for ATSC reception w/o any problems. Then, after a Debinan (unstable) update, I lost the card. I assume I had picked up a new release of v4l. So I tried to re-compile & install my source copy of v4l I downloaded last July - but that didn't work. I then downloaded, compiled & installed the most recent v4l today - but that didn't work either. Currently, the tuner acts as if the signal is weak. The picture is pixelated and breaks up. I have swapped the antenna lead with a set-top-box ATSC tuner. The set-top-box appears to work well with either it's own antenna lead or the Kworld's antenna lead.

So, now I'm wondering - could something have happened to v4l in the last 9 months? For instance, could a v4l code change effect the Kworld 120's AGC feature?

FYI: The same antenna provides signals for another Kworld 110 tuner and a Happauge NTSC tuner (both in a different computer) as well as a number of other appliances. All of which appear to be working fine.

...thanks

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list