Add support for Faraday Ethernet IP FTMAC100
PATCH 1/1 Add support for Faraday Ethernet IP FTMAC100
This patch adds support for Faraday Technology Ethernet IP - FTMAC100
---
drivers/net/ftmac100.c +219 -0
@@ -0,0 +1,219 @@ +/* +* Faraday FTMAC100 Ethernet +* +* (C) Copyright 2009 Faraday Technology +* Po-Yu Chuang <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#undef DEBUG + +#include <config.h> +#include <common.h> +#include <net.h> +#include <asm/io.h> +#include "ftmac100.h" + +DECLARE_GLOBAL_DATA_PTR ; + +static unsigned int ftmac100_base =CONFIG_SYS_MAC100_BASE ; + +static volatile struct ftmac100_txdes txdes[1 ]; +static volatile struct ftmac100_rxdes rxdes[PKTBUFSRX ]; +static int rx_index; + +/* +* Reset MAC +*/ +static void +ftmac100_reset (void ) +{ +debug ("ftmac100_reset()\n" ); + +outl (FTMAC100_MACCR_SW_RST , ftmac100_base +FTMAC100_OFFSET_MACCR ); + +while (inl (ftmac100_base +FTMAC100_OFFSET_MACCR ) &FTMAC100_MACCR_SW_RST ); +} + +/* +* Set MAC address +*/ +static void +ftmac100_set_mac (const unsigned char *mac) +{ +unsigned short maddr = mac[0 ] <<8 | mac[1 ]; +unsigned int laddr = mac[2 ] <<24 | mac[3 ] <<16 | mac[4 ] <<8 | mac[5 ]; + +debug ("ftmac100_set_mac()\n" ); + +outl (maddr, ftmac100_base +FTMAC100_OFFSET_MAC_MADR ); +outl (laddr, ftmac100_base +FTMAC100_OFFSET_MAC_LADR ); +} + +/* +* disable transmitter, receiver +*/ +void +eth_halt (void ) +{ +debug ("eth_halt()\n" ); + +outl (0 , ftmac100_base +FTMAC100_OFFSET_MACCR ); +} + +int +eth_init (bd_t *bd) +{ +int i; +unsigned int maccr; + +debug ("eth_init()\n" ); + +ftmac100_reset (); + +/* set the ethernet address */ + +ftmac100_set_mac (gd->bd->bi_enetaddr); + +/* disable all interrupts */ + +outl (0 , ftmac100_base +FTMAC100_OFFSET_IMR ); + +/* initialize descriptors */ + + rx_index =0 ; + + txdes[0 ].txdes1 =FTMAC100_TXDES1_EDOTR ; + rxdes[PKTBUFSRX -1 ].rxdes1 =FTMAC100_RXDES1_EDORR ; + +for (i =0 ; i <PKTBUFSRX ; i++) { + rxdes[i].rxdes2 = (unsigned int )NetRxPackets[i];/* RXBUF_BADR */ + rxdes[i].rxdes1 |=FTMAC100_RXDES1_RXBUF_SIZE (PKTSIZE_ALIGN ); + rxdes[i].rxdes0 =FTMAC100_RXDES0_RXDMA_OWN ; + } + +/* transmit ring */ + +outl (txdes, ftmac100_base +FTMAC100_OFFSET_TXR_BADR ); + +/* receive ring */ + +outl (rxdes, ftmac100_base +FTMAC100_OFFSET_RXR_BADR ); + +/* poll receive descriptor automatically */ + +outl (FTMAC100_APTC_RXPOLL_CNT (1 ), ftmac100_base +FTMAC100_OFFSET_APTC ); + +/* enable transmitter, receiver */ + + maccr =FTMAC100_MACCR_XMT_EN + |FTMAC100_MACCR_RCV_EN + |FTMAC100_MACCR_XDMA_EN + |FTMAC100_MACCR_RDMA_EN + |FTMAC100_MACCR_CRC_APD + |FTMAC100_MACCR_ENRX_IN_HALFTX + |FTMAC100_MACCR_RX_RUNT + |FTMAC100_MACCR_RX_BROADPKT ; + +outl (maccr, ftmac100_base +FTMAC100_OFFSET_MACCR ); + +return 0 ; +} + +/* +* Get a data block via Ethernet +*/ +int +eth_rx (void ) +{ +volatile struct ftmac100_rxdes *curr_des = &rxdes[rx_index]; +unsigned short rxlen; + +if (curr_des->rxdes0 &FTMAC100_RXDES0_RXDMA_OWN ) { +return -1 ; + } + +if (curr_des->rxdes0 & (FTMAC100_RXDES0_RX_ERR + |FTMAC100_RXDES0_CRC_ERR + |FTMAC100_RXDES0_FTL + |FTMAC100_RXDES0_RUNT + |FTMAC100_RXDES0_RX_ODD_NB )) { +return -1 ; + } + + rxlen =FTMAC100_RXDES0_RFL (curr_des->rxdes0); + +debug ("eth_rx(): RX buffer %d, %x received\n" , rx_index, rxlen); + +/* pass the packet up to the protocol layers. */ + +NetReceive ((void *)curr_des->rxdes2, rxlen); + +/* release buffer to DMA */ + + curr_des->rxdes0 |=FTMAC100_RXDES0_RXDMA_OWN ; + + rx_index = (rx_index +1 ) %PKTBUFSRX ; + +return 0 ; +} + +/* +* Send a data block via Ethernet +*/ +int +eth_send (volatile void *packet,int length) +{ +volatile struct ftmac100_txdes *curr_des = txdes; +int tmo; + +if (curr_des->txdes0 &FTMAC100_TXDES0_TXPKT_TXDMA_OWN ) { +debug ("eth_send(): no TX descriptor available\n" ); +return -1 ; + } + +debug ("eth_send(%x, %x)\n" , (int )packet, length); + +/* initiate a transmit sequence */ + + curr_des->txdes2 = (unsigned int )packet;/* TXBUF_BADR */ + + curr_des->txdes1 &=FTMAC100_TXDES1_EDOTR ; + curr_des->txdes1 |=FTMAC100_TXDES1_FTS + |FTMAC100_TXDES1_LTS + |FTMAC100_TXDES1_TXBUF_SIZE ((length <64 ) ?64 : length); + + curr_des->txdes0 =FTMAC100_TXDES0_TXPKT_TXDMA_OWN ; + +/* start transmit */ + +outl (1 , ftmac100_base +FTMAC100_OFFSET_TXPD ); + +/* wait for transfer to succeed */ + + tmo =get_timer (0 ) +5 *CONFIG_SYS_HZ ; +while (curr_des->txdes0 &FTMAC100_TXDES0_TXPKT_TXDMA_OWN ) { +if (get_timer (0 ) >= tmo) { +debug ("eth_send(): timed out\n" ); +return -1 ; + } + } + +debug ("eth_send(): packet sent\n" ); + +return 0 ; +} +
drivers/net/ftmac100.h +146 -0
146 lines not on this page · raw message
drivers/net/Makefile +1 -0
@@ -38,6 +38,7 @@ COBJS-$(CONFIG_EEPRO100) += eepro100.o COBJS-$(CONFIG_ENC28J60) += enc28j60.o COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o +COBJS-$(CONFIG_DRIVER_FTMAC100) += ftmac100.o COBJS-$(CONFIG_GRETH) += greth.o COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
PATCH 1/1 Add support for Faraday Ethernet IP FTMAC100
Quoted 2 lines · PoYu_Chuang
This patch adds support for Faraday Technology Ethernet IP - FTMAC100
Do you have any plan to add a SOC and a board?
Best Regards,
J.
PATCH 1/1 Add support for Faraday Ethernet IP FTMAC100
In reply to PoYu_ChuangQuoted 1 line · On Tuesday 31 March 2009 04:13:11 PoYu_Chuang wrote:
This patch adds support for Faraday Technology Ethernet IP - FTMAC100
kind of redundant statement considering the summary ...
Quoted 1 line
Signed-off-by Po-Yu Chuang <[email protected]>
you should really be using git to generate patches and send e-mails. also, signed-off-by (and similar tags) use real addresses, not munged ones. -mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090331/fe92b625/attachment.pgp
PATCH 1/1 Add support for Faraday Ethernet IP FTMAC100
In reply to PoYu_ChuangHi Po Yu Chang,
Quoted 4 lines · PoYu_Chuang
This patch adds support for Faraday Technology Ethernet IP - FTMAC100
Signed-off-by Po-Yu Chuang <[email protected]>
Please use a valid e-mail address (hint - it should have an @ sign). You may want to provide a brief description of the controller here.
Quoted 3 lines
---
diff -ruNu-boot-2009.03/drivers/net/ftmac100.cFA5A320LINUX26_u-boot/drivers/net/ftmac100.c
It's best to use git tools to generate the patch. If you use git-send-email you're more-or-less guaranteed to avoid line-wrapping issues.
Quoted 52 lines
drivers/net/ftmac100.c +48
-0@@ -0,0 +1,219 @@ +/* +* Faraday FTMAC100 Ethernet +* +* (C) Copyright 2009 Faraday Technology +* Po-Yu Chuang <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#undef DEBUG + +#include <config.h> +#include <common.h> +#include <net.h> +#include <asm/io.h> +#include "ftmac100.h" + +DECLARE_GLOBAL_DATA_PTR ; + +static unsigned int ftmac100_base =CONFIG_SYS_MAC100_BASE ; + +static volatile struct ftmac100_txdes txdes[1 ]; +static volatile struct ftmac100_rxdes rxdes[PKTBUFSRX ]; +static int rx_index; + +/* +* Reset MAC +*/ +static void +ftmac100_reset (void ) +{ +debug ("ftmac100_reset()\n" ); + +outl (FTMAC100_MACCR_SW_RST , ftmac100_base +FTMAC100_OFFSET_MACCR ); + +while (inl (ftmac100_base +FTMAC100_OFFSET_MACCR ) &FTMAC100_MACCR_SW_RST );
drivers/net/ftmac100.c line 58
Quoted 10 lines
drivers/net/ftmac100.c +10
-0+} + +/* +* Set MAC address +*/ +static void +ftmac100_set_mac (const unsigned char *mac) +{ +unsigned short maddr = mac[0 ] <<8 | mac[1 ]; +unsigned int laddr = mac[2 ] <<24 | mac[3 ] <<16 | mac[4 ] <<8 | mac[5 ];
This is a strange way of doing this. Do you really need to use two variables?
drivers/net/ftmac100.c line 63
Quoted 6 lines
drivers/net/ftmac100.c +5
-0+ +debug ("ftmac100_set_mac()\n" ); + +outl (maddr, ftmac100_base +FTMAC100_OFFSET_MAC_MADR ); +outl (laddr, ftmac100_base +FTMAC100_OFFSET_MAC_LADR );
Others have mentioned not using outl(), so echo'd here
drivers/net/ftmac100.c line 75
Quoted 13 lines
drivers/net/ftmac100.c +12
-0+} + +/* +* disable transmitter, receiver +*/ +void +eth_halt (void ) +{ +debug ("eth_halt()\n" ); + +outl (0 , ftmac100_base +FTMAC100_OFFSET_MACCR ); +}
Please don't use the old-style API (eth_halt(), eth_init() etc.) You should have a single xxx_initialize() function that fills in an eth_device struct with function pointers to static functions. You'll find lots of examples in drivers/net
Quoted 298 lines
drivers/net/ftmac100.c +144
-0+ +int +eth_init (bd_t *bd) +{ +int i; +unsigned int maccr; + +debug ("eth_init()\n" ); + +ftmac100_reset (); + +/* set the ethernet address */ + +ftmac100_set_mac (gd->bd->bi_enetaddr); + +/* disable all interrupts */ + +outl (0 , ftmac100_base +FTMAC100_OFFSET_IMR ); + +/* initialize descriptors */ + + rx_index =0 ; + + txdes[0 ].txdes1 =FTMAC100_TXDES1_EDOTR ; + rxdes[PKTBUFSRX -1 ].rxdes1 =FTMAC100_RXDES1_EDORR ; + +for (i =0 ; i <PKTBUFSRX ; i++) { + rxdes[i].rxdes2 = (unsigned int )NetRxPackets[i];/* RXBUF_BADR */ + rxdes[i].rxdes1 |=FTMAC100_RXDES1_RXBUF_SIZE (PKTSIZE_ALIGN ); + rxdes[i].rxdes0 =FTMAC100_RXDES0_RXDMA_OWN ; + } + +/* transmit ring */ + +outl (txdes, ftmac100_base +FTMAC100_OFFSET_TXR_BADR ); + +/* receive ring */ + +outl (rxdes, ftmac100_base +FTMAC100_OFFSET_RXR_BADR ); + +/* poll receive descriptor automatically */ + +outl (FTMAC100_APTC_RXPOLL_CNT (1 ), ftmac100_base +FTMAC100_OFFSET_APTC ); + +/* enable transmitter, receiver */ + + maccr =FTMAC100_MACCR_XMT_EN + |FTMAC100_MACCR_RCV_EN + |FTMAC100_MACCR_XDMA_EN + |FTMAC100_MACCR_RDMA_EN + |FTMAC100_MACCR_CRC_APD + |FTMAC100_MACCR_ENRX_IN_HALFTX + |FTMAC100_MACCR_RX_RUNT + |FTMAC100_MACCR_RX_BROADPKT ; + +outl (maccr, ftmac100_base +FTMAC100_OFFSET_MACCR ); + +return 0 ; +} + +/* +* Get a data block via Ethernet +*/ +int +eth_rx (void ) +{ +volatile struct ftmac100_rxdes *curr_des = &rxdes[rx_index]; +unsigned short rxlen; + +if (curr_des->rxdes0 &FTMAC100_RXDES0_RXDMA_OWN ) { +return -1 ; + } + +if (curr_des->rxdes0 & (FTMAC100_RXDES0_RX_ERR + |FTMAC100_RXDES0_CRC_ERR + |FTMAC100_RXDES0_FTL + |FTMAC100_RXDES0_RUNT + |FTMAC100_RXDES0_RX_ODD_NB )) { +return -1 ; + } + + rxlen =FTMAC100_RXDES0_RFL (curr_des->rxdes0); + +debug ("eth_rx(): RX buffer %d, %x received\n" , rx_index, rxlen); + +/* pass the packet up to the protocol layers. */ + +NetReceive ((void *)curr_des->rxdes2, rxlen); + +/* release buffer to DMA */ + + curr_des->rxdes0 |=FTMAC100_RXDES0_RXDMA_OWN ; + + rx_index = (rx_index +1 ) %PKTBUFSRX ; + +return 0 ; +} + +/* +* Send a data block via Ethernet +*/ +int +eth_send (volatile void *packet,int length) +{ +volatile struct ftmac100_txdes *curr_des = txdes; +int tmo; + +if (curr_des->txdes0 &FTMAC100_TXDES0_TXPKT_TXDMA_OWN ) { +debug ("eth_send(): no TX descriptor available\n" ); +return -1 ; + } + +debug ("eth_send(%x, %x)\n" , (int )packet, length); + +/* initiate a transmit sequence */ + + curr_des->txdes2 = (unsigned int )packet;/* TXBUF_BADR */ + + curr_des->txdes1 &=FTMAC100_TXDES1_EDOTR ; + curr_des->txdes1 |=FTMAC100_TXDES1_FTS + |FTMAC100_TXDES1_LTS + |FTMAC100_TXDES1_TXBUF_SIZE ((length <64 ) ?64 : length); + + curr_des->txdes0 =FTMAC100_TXDES0_TXPKT_TXDMA_OWN ; + +/* start transmit */ + +outl (1 , ftmac100_base +FTMAC100_OFFSET_TXPD ); + +/* wait for transfer to succeed */ + + tmo =get_timer (0 ) +5 *CONFIG_SYS_HZ ; +while (curr_des->txdes0 &FTMAC100_TXDES0_TXPKT_TXDMA_OWN ) { +if (get_timer (0 ) >= tmo) { +debug ("eth_send(): timed out\n" ); +return -1 ; + } + } + +debug ("eth_send(): packet sent\n" ); + +return 0 ; +} +diff -ruN
u-boot-2009.03/drivers/net/ftmac100.hFA5A320LINUX26_u-boot/drivers/net/ftmac100.hdrivers/net/ftmac100.h +146
-0@@ -0,0 +1,146 @@ +/* +* Faraday FTMAC100 Ethernet +* +* (C) Copyright 2009 Faraday Technology +* Po-Yu Chuang <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __FTMAC100_H +#define __FTMAC100_H + +#define FTMAC100_OFFSET_ISR 0x00 +#define FTMAC100_OFFSET_IMR 0x04 +#define FTMAC100_OFFSET_MAC_MADR 0x08 +#define FTMAC100_OFFSET_MAC_LADR 0x0c +#define FTMAC100_OFFSET_MAHT0 0x10 +#define FTMAC100_OFFSET_MAHT1 0x14 +#define FTMAC100_OFFSET_TXPD 0x18 +#define FTMAC100_OFFSET_RXPD 0x1c +#define FTMAC100_OFFSET_TXR_BADR 0x20 +#define FTMAC100_OFFSET_RXR_BADR 0x24 +#define FTMAC100_OFFSET_ITC 0x28 +#define FTMAC100_OFFSET_APTC 0x2c +#define FTMAC100_OFFSET_DBLAC 0x30 +#define FTMAC100_OFFSET_MACCR 0x88 +#define FTMAC100_OFFSET_MACSR 0x8c +#define FTMAC100_OFFSET_PHYCR 0x90 +#define FTMAC100_OFFSET_PHYWDATA 0x94 +#define FTMAC100_OFFSET_FCR 0x98 +#define FTMAC100_OFFSET_BPR 0x9c +#define FTMAC100_OFFSET_TS 0xc4 +#define FTMAC100_OFFSET_DMAFIFOS 0xc8 +#define FTMAC100_OFFSET_TM 0xcc +#define FTMAC100_OFFSET_TX_MCOL_SCOL 0xd4 +#define FTMAC100_OFFSET_RPF_AEP 0xd8 +#define FTMAC100_OFFSET_XM_PG 0xdc +#define FTMAC100_OFFSET_RUNT_TLCC 0xe0 +#define FTMAC100_OFFSET_CRCER_FTL 0xe4 +#define FTMAC100_OFFSET_RLC_RCC 0xe8 +#define FTMAC100_OFFSET_BROC 0xec +#define FTMAC100_OFFSET_MULCA 0xf0 +#define FTMAC100_OFFSET_RP 0xf4 +#define FTMAC100_OFFSET_XP 0xf8 + +/* +* Interrupt status register & interrupt mask register +*/ +#define FTMAC100_INT_RPKT_FINISH (1 << 0) +#define FTMAC100_INT_NORXBUF (1 << 1) +#define FTMAC100_INT_XPKT_FINISH (1 << 2) +#define FTMAC100_INT_NOTXBUF (1 << 3) +#define FTMAC100_INT_XPKT_OK (1 << 4) +#define FTMAC100_INT_XPKT_LOST (1 << 5) +#define FTMAC100_INT_RPKT_SAV (1 << 6) +#define FTMAC100_INT_RPKT_LOST (1 << 7) +#define FTMAC100_INT_AHB_ERR (1 << 8) +#define FTMAC100_INT_PHYSTS_CHG (1 << 9) + +/* +* Automatic polling timer control register +*/ +#define FTMAC100_APTC_RXPOLL_CNT (x) (((x) & 0xf) << 0) +#define FTMAC100_APTC_RXPOLL_TIME_SEL (1 << 4) +#define FTMAC100_APTC_TXPOLL_CNT (x) (((x) & 0xf) << 8) +#define FTMAC100_APTC_TXPOLL_TIME_SEL (1 << 12) + +/* +* MAC control register +*/ +#define FTMAC100_MACCR_XDMA_EN (1 << 0) +#define FTMAC100_MACCR_RDMA_EN (1 << 1) +#define FTMAC100_MACCR_SW_RST (1 << 2) +#define FTMAC100_MACCR_LOOP_EN (1 << 3) +#define FTMAC100_MACCR_CRC_DIS (1 << 4) +#define FTMAC100_MACCR_XMT_EN (1 << 5) +#define FTMAC100_MACCR_ENRX_IN_HALFTX (1 << 6) +#define FTMAC100_MACCR_RCV_EN (1 << 8) +#define FTMAC100_MACCR_HT_MULTI_EN (1 << 9) +#define FTMAC100_MACCR_RX_RUNT (1 << 10) +#define FTMAC100_MACCR_RX_FTL (1 << 11) +#define FTMAC100_MACCR_RCV_ALL (1 << 12) +#define FTMAC100_MACCR_CRC_APD (1 << 14) +#define FTMAC100_MACCR_FULLDUP (1 << 15) +#define FTMAC100_MACCR_RX_MULTIPKT (1 << 16) +#define FTMAC100_MACCR_RX_BROADPKT (1 << 17) + +/* +* Transmit descriptor, aligned to 16 bytes +*/ +struct ftmac100_txdes { +unsigned int txdes0; +unsigned int txdes1; +unsigned int txdes2;/* TXBUF_BADR */ +unsigned int txdes3;/* not used by HW */ +} __attribute__ ((aligned (16 ))); + +#define FTMAC100_TXDES0_TXPKT_LATECOL (1 << 0) +#define FTMAC100_TXDES0_TXPKT_EXSCOL (1 << 1) +#define FTMAC100_TXDES0_TXPKT_TXDMA_OWN (1 << 31) + +#define FTMAC100_TXDES1_TXBUF_SIZE (x) ((x) & 0x7ff) +#define FTMAC100_TXDES1_LTS (1 << 27) +#define FTMAC100_TXDES1_FTS (1 << 28) +#define FTMAC100_TXDES1_TX2FIC (1 << 29) +#define FTMAC100_TXDES1_TXIC (1 << 30) +#define FTMAC100_TXDES1_EDOTR (1 << 31) + +/* +* Receive descriptor, aligned to 16 bytes +*/ +struct ftmac100_rxdes { +unsigned int rxdes0; +unsigned int rxdes1; +unsigned int rxdes2;/* RXBUF_BADR */ +unsigned int rxdes3;/* not used by HW */ +} __attribute__ ((aligned (16 ))); + +#define FTMAC100_RXDES0_RFL (des) ((des) & 0x7ff) +#define FTMAC100_RXDES0_MULTICAST (1 << 16) +#define FTMAC100_RXDES0_BROADCAST (1 << 17) +#define FTMAC100_RXDES0_RX_ERR (1 << 18) +#define FTMAC100_RXDES0_CRC_ERR (1 << 19) +#define FTMAC100_RXDES0_FTL (1 << 20) +#define FTMAC100_RXDES0_RUNT (1 << 21) +#define FTMAC100_RXDES0_RX_ODD_NB (1 << 22) +#define FTMAC100_RXDES0_LRS (1 << 28) +#define FTMAC100_RXDES0_FRS (1 << 29) +#define FTMAC100_RXDES0_RXDMA_OWN (1 << 31) + +#define FTMAC100_RXDES1_RXBUF_SIZE (x) ((x) & 0x7ff) +#define FTMAC100_RXDES1_EDORR (1 << 31) + +#endif /* __FTMAC100_H */ diff -ruN u-boot-2009.03/drivers/net/Makefile FA5A320LINUX26_u-boot/drivers/net/Makefile
drivers/net/Makefile line 44
Quoted 7 lines
drivers/net/Makefile +1
-0@@ -38,6 +38,7 @@ COBJS-$(CONFIG_EEPRO100) += eepro100.o COBJS-$(CONFIG_ENC28J60) += enc28j60.o COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o +COBJS-$(CONFIG_DRIVER_FTMAC100) += ftmac100.o COBJS-$(CONFIG_GRETH) += greth.o COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
In general, this is quite promising - thanks a lot! We tend to not include drivers without a board that uses it. Please consider submitting your board code too.
regards,
Ben