New performance results
I am continuing to do runs to provide more data on the random write issues with btrfs. I have just posted 2 sets of runs here:
http://btrfs.boxacle.net/repository/raid/longrun/
these are on a pull of the btrfs-unstable experimental branch from 4/3.
These are 100 minute runs of the 128 thread random write workload on the raid system (1 for btrfs and 1 for ext3). Included in these runs are graphs of all the iostat, sar and mpstat data (see analysis directories).
A couple of interesting things. First, we see the choppiness of the IO in btrfs compared to ext3.
http://btrfs.boxacle.net/repository/raid/longrun/btrfs-longrun/btrfs1.ffsb.random_writes__threads_0128.09-04-06_10.25.03/analysis/iostat-processed.001/chart.html
In particular look at graphs 7 and 11 which show write iops and throughput. Ext3 is nice and smooth, while btrfs has a repeating pattern of dips and spikes, with IO going to 0 on a regular basis.
Another interesting observation is what looks a lot like a memory leak. Looking at chart 6 Memory at :
http://btrfs.boxacle.net/repository/raid/longrun/btrfs-longrun/btrfs1.ffsb.random_writes__threads_0128.09-04-06_10.25.03/analysis/sar-processed.001/chart.html
we see that the amount of page cache drops slowly throughout the entire run. Starting up around 3.5GB and dropping to about 2.3GB by the end of the run. The memory seems to have moved to the slab which grew to 1.5GB. Doing a repeat of the run while watching slabtop, we see that size-2048 is responsible for the majority of the slab usage (over 1GB).
We do not see this behavior under ext3.
Steve
Quoted 31 lines · Steven Pratt
I am continuing to do runs to provide more data on the random write issues with btrfs. I have just posted 2 sets of runs here:
http://btrfs.boxacle.net/repository/raid/longrun/these are on a pull of the btrfs-unstable experimental branch from 4/3.
These are 100 minute runs of the 128 thread random write workload on the raid system (1 for btrfs and 1 for ext3). Included in these runs are graphs of all the iostat, sar and mpstat data (see analysis directories).
A couple of interesting things. First, we see the choppiness of the IO in btrfs compared to ext3.
In particular look at graphs 7 and 11 which show write iops and throughput. Ext3 is nice and smooth, while btrfs has a repeating pattern of dips and spikes, with IO going to 0 on a regular basis.
Another interesting observation is what looks a lot like a memory leak. Looking at chart 6 Memory at :
Quoted 7 lines
we see that the amount of page cache drops slowly throughout the entire run. Starting up around 3.5GB and dropping to about 2.3GB by the end of the run. The memory seems to have moved to the slab which grew to 1.5GB. Doing a repeat of the run while watching slabtop, we see that size-2048 is responsible for the majority of the slab usage (over 1GB).
We do not see this behavior under ext3.
Yeah, which tree are you running against? I had this problem a few weeks ago, but I don't remember if it was fixed or anything usefull like that, it may be worth it to try running against the newest stuff. Thanks,
Josef
Quoted 6 lines · Josef Bacik
Quoted 5 lines · Steven Pratt
I am continuing to do runs to provide more data on the random write issues with btrfs. I have just posted 2 sets of runs here:
http://btrfs.boxacle.net/repository/raid/longrun/these are on a pull of the btrfs-unstable experimental branch from 4/3.
Hey there it is, sorry, I will look at this and see if I can remember what the problem is. Thanks,
Josef
Quoted 14 lines · Steven Pratt
I am continuing to do runs to provide more data on the random write issues with btrfs. I have just posted 2 sets of runs here:
http://btrfs.boxacle.net/repository/raid/longrun/these are on a pull of the btrfs-unstable experimental branch from 4/3.
These are 100 minute runs of the 128 thread random write workload on the raid system (1 for btrfs and 1 for ext3). Included in these runs are graphs of all the iostat, sar and mpstat data (see analysis directories).
A couple of interesting things. First, we see the choppiness of the IO in btrfs compared to ext3.
http://btrfs.boxacle.net/repository/raid/longrun/btrfs-longrun/btrfs1.ffsb.random_writes__threads_0128.09-04-06_10.25.03/analysis/iostat-processed.001/chart.html
Quoted 7 lines
In particular look at graphs 7 and 11 which show write iops and throughput. Ext3 is nice and smooth, while btrfs has a repeating pattern of dips and spikes, with IO going to 0 on a regular basis.
The dips and spikes may be from the allocator. Basically what happens is after each commit we end up with a bunch of small blocks available for filling again. Could you please try with -o ssd?
Quoted 10 lines
Another interesting observation is what looks a lot like a memory leak. Looking at chart 6 Memory at :
http://btrfs.boxacle.net/repository/raid/longrun/btrfs-longrun/btrfs1.ffsb.random_writes__threads_0128.09-04-06_10.25.03/analysis/sar-processed.001/chart.htmlwe see that the amount of page cache drops slowly throughout the entire run. Starting up around 3.5GB and dropping to about 2.3GB by the end of the run. The memory seems to have moved to the slab which grew to 1.5GB. Doing a repeat of the run while watching slabtop, we see that size-2048 is responsible for the majority of the slab usage (over 1GB).
size-2048? That's probably the csums. I'll give it a shot when I get back next week.
-chris
Quoted 15 lines · Chris Mason
Quoted 13 lines · Steven Pratt
I am continuing to do runs to provide more data on the random write issues with btrfs. I have just posted 2 sets of runs here:
http://btrfs.boxacle.net/repository/raid/longrun/these are on a pull of the btrfs-unstable experimental branch from 4/3.
These are 100 minute runs of the 128 thread random write workload on the raid system (1 for btrfs and 1 for ext3). Included in these runs are graphs of all the iostat, sar and mpstat data (see analysis directories).
A couple of interesting things. First, we see the choppiness of the IO in btrfs compared to ext3.
http://btrfs.boxacle.net/repository/raid/longrun/btrfs-longrun/btrfs1.ffsb.random_writes__threads_0128.09-04-06_10.25.03/analysis/iostat-processed.001/chart.html
Quoted 9 lines
Quoted 3 lines
In particular look at graphs 7 and 11 which show write iops and throughput. Ext3 is nice and smooth, while btrfs has a repeating pattern of dips and spikes, with IO going to 0 on a regular basis.
The dips and spikes may be from the allocator. Basically what happens is after each commit we end up with a bunch of small blocks available for filling again. Could you please try with -o ssd?
Will give it a shot.
Quoted 10 lines
Quoted 7 lines
Another interesting observation is what looks a lot like a memory leak. Looking at chart 6 Memory at :
http://btrfs.boxacle.net/repository/raid/longrun/btrfs-longrun/btrfs1.ffsb.random_writes__threads_0128.09-04-06_10.25.03/analysis/sar-processed.001/chart.htmlwe see that the amount of page cache drops slowly throughout the entire run. Starting up around 3.5GB and dropping to about 2.3GB by the end of the run. The memory seems to have moved to the slab which grew to 1.5GB. Doing a repeat of the run while watching slabtop, we see that size-2048 is responsible for the majority of the slab usage (over 1GB).
size-2048? That's probably the csums. I'll give it a shot when I get back next week
Ok.
One other thing I noticed that is really bad. For ext3, we see 115MB/sec both from the benchmark reporting and from iostat write throughput. However, for btrfs, we see a benchmark throughput of 2.5MB/sec while iostat shows a whopping 35MB/sec of writes. That to me implies that btrfs is doing an additional 32-33MB/sec of metadata or journal writes. More than 10x the amount of actual data being written. Can that be right?
Steve
Quoted 5 lines
.
-chris
Quoted 20 lines · Steven Pratt
Quoted 19 lines · Chris Mason
Quoted 16 lines · Steven Pratt
I am continuing to do runs to provide more data on the random write issues with btrfs. I have just posted 2 sets of runs here:
http://btrfs.boxacle.net/repository/raid/longrun/these are on a pull of the btrfs-unstable experimental branch from 4/3.
These are 100 minute runs of the 128 thread random write workload on the raid system (1 for btrfs and 1 for ext3). Included in these runs are graphs of all the iostat, sar and mpstat data (see analysis directories).
A couple of interesting things. First, we see the choppiness of the IO in btrfs compared to ext3.
http://btrfs.boxacle.net/repository/raid/longrun/btrfs-longrun/btrfs1.ffsb.random_writes__threads_0128.09-04-06_10.25.03/analysis/iostat-processed.001/chart.htmlIn particular look at graphs 7 and 11 which show write iops and throughput. Ext3 is nice and smooth, while btrfs has a repeating pattern of dips and spikes, with IO going to 0 on a regular basis.
Quoted 6 lines
Quoted 5 lines
The dips and spikes may be from the allocator. Basically what happens is after each commit we end up with a bunch of small blocks available for filling again. Could you please try with -o ssd?
Will give it a shot.
Results with -o ssd were not much different. 2.85MB/sec vs 2.5MB/sec. Also, the spiky behavior still exists. All 3 runs at:
http://btrfs.boxacle.net/repository/raid/longrun/
Also, finally have the blktrace runs you wanted. A 128thread odirect random write workload is tarred up at:
http://btrfs.boxacle.net/repository/raid/blktrcrun.tar.bz
blktrace is inteh analysis/blktrace.001 dir.
Steve
Quoted 26 lines
Quoted 10 lines
Quoted 7 lines
Another interesting observation is what looks a lot like a memory leak. Looking at chart 6 Memory at :
http://btrfs.boxacle.net/repository/raid/longrun/btrfs-longrun/btrfs1.ffsb.random_writes__threads_0128.09-04-06_10.25.03/analysis/sar-processed.001/chart.htmlwe see that the amount of page cache drops slowly throughout the entire run. Starting up around 3.5GB and dropping to about 2.3GB by the end of the run. The memory seems to have moved to the slab which grew to 1.5GB. Doing a repeat of the run while watching slabtop, we see that size-2048 is responsible for the majority of the slab usage (over 1GB).
size-2048? That's probably the csums. I'll give it a shot when I get back next week
Ok.
One other thing I noticed that is really bad. For ext3, we see 115MB/sec both from the benchmark reporting and from iostat write throughput. However, for btrfs, we see a benchmark throughput of 2.5MB/sec while iostat shows a whopping 35MB/sec of writes. That to me implies that btrfs is doing an additional 32-33MB/sec of metadata or journal writes. More than 10x the amount of actual data being written. Can that be right?
Steve
Quoted 5 lines
.
-chris
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html