Skip to contentSkip to conversation

Disabling PCI on PPC460EX

U-Boot Felix Radensky 2 participants 2 messages Apr 15, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

Is there a way to disable PCI on 460EX (via some config option) while leaving PCI-E enabled ? I'm asking because on custom board I have PCI is unused, but both PCI-E slots should be enabled. I had problems with this in u-boot-1.3.4, and had to modify pci_init_board() to not invoke pci_440_init().

Thanks.

Felix.

#1 lore raw

Hi Felix,

Quoted 5 lines · Felix Radensky

Is there a way to disable PCI on 460EX (via some config option) while leaving PCI-E enabled ? I'm asking because on custom board I have PCI is unused, but both PCI-E slots should be enabled. I had problems with this in u-boot-1.3.4, and had to modify pci_init_board() to not invoke pci_440_init().

Could be that you need to change some code here. Patches as always welcome. ;)

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================