Skip to contentSkip to conversation

serial: Z85C30: BCM1480: loops reach -1

PATCH New Roel Kluin 1 participant 1 message Apr 16, 2009

lore
Share & tools
lore

Roel Kluin

author
#0 lore raw

PATCH 1/1 serial: Z85C30: BCM1480: loops reach -1

With a postfix decrement 'loops' reaches -1, which is subsequently returned. In drivers/serial/zs.c, line 1137 it is considered as a boolean with 0 as failure:

if (zs_transmit_drain(zport, irq))

                write_zsdata(zport, ch);

so to use it as such loops should end at 0 after the loop rather than -1. This also fixes similar loops in other functions.

---

drivers/serial/sb1250-duart.c +3 -3
index a4fb343..319e8b8 100644
@@ -204,7 +204,7 @@ static int sbd_receive_drain(struct sbd_port *sport)
 {
 	int loops = 10000;
 
-	while (sbd_receive_ready(sport) && loops--)
+	while (sbd_receive_ready(sport) && --loops)
 		read_sbdchn(sport, R_DUART_RX_HOLD);
 	return loops;
 }
@@ -218,7 +218,7 @@ static int __maybe_unused sbd_transmit_drain(struct sbd_port *sport)
 {
 	int loops = 10000;
 
-	while (!sbd_transmit_ready(sport) && loops--)
+	while (!sbd_transmit_ready(sport) && --loops)
 		udelay(2);
 	return loops;
 }
@@ -232,7 +232,7 @@ static int sbd_line_drain(struct sbd_port *sport)
 {
 	int loops = 10000;
 
-	while (!sbd_transmit_empty(sport) && loops--)
+	while (!sbd_transmit_empty(sport) && --loops)
 		udelay(2);
 	return loops;
 }
drivers/serial/zs.c +3 -3
index 9e6a873..d8c2809 100644
@@ -231,7 +231,7 @@ static int zs_receive_drain(struct zs_port *zport)
 {
 	int loops = 10000;
 
-	while ((read_zsreg(zport, R0) & Rx_CH_AV) && loops--)
+	while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops)
 		read_zsdata(zport);
 	return loops;
 }
@@ -241,7 +241,7 @@ static int zs_transmit_drain(struct zs_port *zport, int irq)
 	struct zs_scc *scc = zport->scc;
 	int loops = 10000;
 
-	while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && loops--) {
+	while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) {
 		zs_spin_unlock_cond_irq(&scc->zlock, irq);
 		udelay(2);
 		zs_spin_lock_cond_irq(&scc->zlock, irq);
@@ -254,7 +254,7 @@ static int zs_line_drain(struct zs_port *zport, int irq)
 	struct zs_scc *scc = zport->scc;
 	int loops = 10000;
 
-	while (!(read_zsreg(zport, R1) & ALL_SNT) && loops--) {
+	while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) {
 		zs_spin_unlock_cond_irq(&scc->zlock, irq);
 		udelay(2);
 		zs_spin_lock_cond_irq(&scc->zlock, irq);