Skip to contentSkip to conversation

Change RTC time drift IRQ re-injection

PATCH Applied Gleb Natapov 2 participants 3 messages Apr 21, 2009 – Apr 22, 2009

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Change RTC time drift IRQ re-injection

Currently IRQ are reinjected as soon as they are acknowledged to the RTC, but Windows sometimes do acknowledgement in a loop with global interrupt disabled waiting for interrupt to be cleared and it does not mask RTC vector in PIC/APIC while doing this. In such situation interrupt injection always fails and RTC interrupt is never cleared.

Instead of reinjecting coalesced IRQs on acknowledgement the patch below reinjects them by accelerating RTC clock a bit. This way RTC interrupt is not constantly raced after coalesced interrupt.

hw/mc146818rtc.c +47 -15
index 9640afe..00cb12f 100644
@@ -73,6 +73,7 @@ struct RTCState {
 #ifdef TARGET_I386
     uint32_t irq_coalesced;
     uint32_t period;
+    QEMUTimer *coalesced_timer;
 #endif
     QEMUTimer *second_timer;
     QEMUTimer *second_timer2;
@@ -93,6 +94,37 @@ static void rtc_irq_raise(qemu_irq irq) {
 static void rtc_set_time(RTCState *s);
 static void rtc_copy_date(RTCState *s);
 
+#ifdef TARGET_I386
+static void rtc_coalesced_timer_update(RTCState *s)
+{
+    if (s->irq_coalesced == 0) {
+        qemu_del_timer(s->coalesced_timer);
+    } else {
+        /* divide each RTC interval to 2 - 8 smaller intervals */
+        int c = MIN(s->irq_coalesced, 7) + 1; 
+        int64_t next_clock = qemu_get_clock(vm_clock) +
+		muldiv64(s->period / c, ticks_per_sec, 32768);
+        qemu_mod_timer(s->coalesced_timer, next_clock);
+    }
+}
+
+static void rtc_coalesced_timer(void *opaque)
+{
+    RTCState *s = opaque;
+
+    if (s->irq_coalesced != 0) {
+        apic_reset_irq_delivered();
+        s->cmos_data[RTC_REG_C] |= 0xc0;
+        rtc_irq_raise(s->irq);
+        if (apic_get_irq_delivered()) {
+            s->irq_coalesced--;
+        }
+    }
+
+    rtc_coalesced_timer_update(s);
+}
+#endif
+
 static void rtc_timer_update(RTCState *s, int64_t current_time)
 {
     int period_code, period;
@@ -138,14 +170,18 @@ static void rtc_periodic_timer(void *opaque)
     RTCState *s = opaque;
 
     rtc_timer_update(s, s->next_periodic_time);
-#ifdef TARGET_I386
-    if ((s->cmos_data[RTC_REG_C] & 0xc0) && rtc_td_hack) {
-        s->irq_coalesced++;
-        return;
-    }
-#endif
     if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
         s->cmos_data[RTC_REG_C] |= 0xc0;
+#ifdef TARGET_I386
+        if(rtc_td_hack) {
+            apic_reset_irq_delivered();
+            rtc_irq_raise(s->irq);
+            if (!apic_get_irq_delivered()) {
+                s->irq_coalesced++;
+                rtc_coalesced_timer_update(s);
+            }
+        } else
+#endif
         rtc_irq_raise(s->irq);
     }
     if (s->cmos_data[RTC_REG_B] & REG_B_SQWE) {
@@ -415,15 +451,6 @@ static uint32_t cmos_ioport_read(void *opaque, uint32_t addr)
         case RTC_REG_C:
             ret = s->cmos_data[s->cmos_index];
             qemu_irq_lower(s->irq);
-#ifdef TARGET_I386
-            if(s->irq_coalesced) {
-                apic_reset_irq_delivered();
-                qemu_irq_raise(s->irq);
-                if (apic_get_irq_delivered())
-                    s->irq_coalesced--;
-                break;
-            }
-#endif
             s->cmos_data[RTC_REG_C] = 0x00;
             break;
         default:
@@ -536,6 +563,7 @@ static int rtc_load_td(QEMUFile *f, void *opaque, int version_id)
 
     s->irq_coalesced = qemu_get_be32(f);
     s->period = qemu_get_be32(f);
+    rtc_coalesced_timer_update(s)
     return 0;
 }
 #endif
@@ -558,6 +586,10 @@ RTCState *rtc_init_sqw(int base, qemu_irq irq, qemu_irq sqw_irq, int base_year)
 
     s->periodic_timer = qemu_new_timer(vm_clock,
                                        rtc_periodic_timer, s);
+#ifdef TARGET_I386
+    if (rtc_td_hack)
+        s->coalesced_timer = qemu_new_timer(vm_clock, rtc_coalesced_timer, s);
+#endif
     s->second_timer = qemu_new_timer(vm_clock,
                                      rtc_update_second, s);
     s->second_timer2 = qemu_new_timer(vm_clock,

--
Gleb.

#1 lore raw
Quoted 7 lines · Gleb Natapov

Currently IRQ are reinjected as soon as they are acknowledged to the RTC, but Windows sometimes do acknowledgement in a loop with global interrupt disabled waiting for interrupt to be cleared and it does not mask RTC vector in PIC/APIC while doing this. In such situation interrupt injection always fails and RTC interrupt is never cleared.

Quoted 6 lines

Instead of reinjecting coalesced IRQs on acknowledgement the patch below reinjects them by accelerating RTC clock a bit. This way RTC interrupt is not constantly raced after coalesced interrupt.

Applied, but...

hw/mc146818rtc.c static int rtc_load_td(QEMUFile *f, void *opaque, int version_id) · line 569

Quoted 8 lines
hw/mc146818rtc.c +1 -0
@@ -536,6 +563,7 @@ static int rtc_load_td(QEMUFile *f, void *opaque, int version_id)
 
     s->irq_coalesced = qemu_get_be32(f);
     s->period = qemu_get_be32(f);
+    rtc_coalesced_timer_update(s)
     return 0;
 }
 #endif

You were missing a ';'. I added it.

Signature · 3 lines
Regards,

Anthony Liguori
#2 lore raw
Quoted 17 lines · Anthony Liguori
Quoted 7 lines · Gleb Natapov

Currently IRQ are reinjected as soon as they are acknowledged to the RTC, but Windows sometimes do acknowledgement in a loop with global interrupt disabled waiting for interrupt to be cleared and it does not mask RTC vector in PIC/APIC while doing this. In such situation interrupt injection always fails and RTC interrupt is never cleared.

Quoted 6 lines

Instead of reinjecting coalesced IRQs on acknowledgement the patch below reinjects them by accelerating RTC clock a bit. This way RTC interrupt is not constantly raced after coalesced interrupt.

Applied, but...

Quoted 9 lines

hw/mc146818rtc.c static int rtc_load_td(QEMUFile *f, void *opaque, int version_id) · line 568

Quoted 7 lines
hw/mc146818rtc.c +1 -0
@@ -536,6 +563,7 @@ static int rtc_load_td(QEMUFile *f, void *opaque, int version_id)
      s->irq_coalesced = qemu_get_be32(f);
     s->period = qemu_get_be32(f);
+    rtc_coalesced_timer_update(s)
     return 0;
 }
 #endif

You were missing a ';'. I added it.

Wow :(. I compiled it and even tested. Honestly! Something on the internet eats semicolons.

--
Gleb.