Skip to contentSkip to conversation

Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU - Device Information

not working Jelle de Jong 3 participants 16 messages Apr 24, 2009 – Jun 5, 2009 Media (V4L/DVB)

lore
Share & tools
lore

Jelle de Jong

author
#0 lore raw

Hello everybody,

Apparently I was feeling a bit masochistic today, because I bought a new usb dvb-t device with the hope it would work on my 2.6.26 kernel because the 2.6.29 is extreme instable and my Digittrade DVB-T USB Stick (Afatech DVB-T) (af9015.fw) does not work with mplayer which is a requirement for me.

So I bought a Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU, but it does not work. Would somebody willing to get this device working? I can sent the device to you if you like.

The device information is attached in this email.

Best regards,

Jelle de Jong

# vendor product page:
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=1&tabid=242&cid=40&gid=4050&pid=CTVDIGRCU
# vendor driver page
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=0&tabid=420&pc=CTVDIGRCU
# codes on device:
080800257
CTVDIGRCU
VERSION 2.0
C08-080 USB 2.0 Digital TV Reciever
# version 3 driver contains the below, but the device is version 2.0
# and the v2.0 driver on the webise is in a .exe i cant extract.
Afa Technologies, Inc.
AF15BDA.DeviceDesc      = "Conceptronic CTVDIGRCU V3.0"
AF15BDA.DeviceDesc1     = "DVB-T 385U"
AF15BDA.FriendlyName    = "AF9015 BDA Filter"
# dutch shop to where to buy them:
http://www.informatique.nl/445144/conceptronic-tv/dvb-t-adapter-usb2.0.html
$ uname -a
Linux debian-eeepc 2.6.29-1-686 #1 SMP Fri Apr 17 14:35:16 UTC 2009 i686 GNU/Linux
$ dpkg -l | grep 2.6.29
ii  linux-image-2.6.29-1-686    2.6.29-3    Linux 2.6.29 image on PPro/Celeron/PII/PIII/P4
ii  linux-libc-dev              2.6.29-3    Linux support headers for userspace development

$dmesg

[   45.948050] usb 1-2: new high speed USB device using ehci_hcd and address 5
[   46.081920] usb 1-2: New USB device found, idVendor=14aa, idProduct=0160
[   46.081927] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   46.081932] usb 1-2: Product: DTV Receiver
[   46.081935] usb 1-2: Manufacturer: DTV Receiver
[   46.081939] usb 1-2: SerialNumber: 0000000000065658
[   46.082129] usb 1-2: configuration #1 chosen from 1 choice

------------------------------------------------------------------------

$ sudo lsusb -vvv -d 14aa:0160
Bus 001 Device 005: ID 14aa:0160 AVerMedia (again) or C&E
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x14aa AVerMedia (again) or C&E
  idProduct          0x0160
  bcdDevice            1.00
  iManufacturer           1 DTV Receiver
  iProduct                2 DTV Receiver
  iSerial                 3 0000000000065658
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 USB2.0-Bulk&Iso
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              5 Bulk-In, Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              6 Iso-In, Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ac  1x 940 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      2
Device Status:     0x0000
  (Bus Powered)

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#1 lore raw
Quoted 7 lines · Jelle de Jong

Hello everybody,

Apparently I was feeling a bit masochistic today, because I bought a new usb dvb-t device with the hope it would work on my 2.6.26 kernel because the 2.6.29 is extreme instable and my Digittrade DVB-T USB Stick (Afatech DVB-T) (af9015.fw) does not work with mplayer which is a requirement for me.

Quoted 5 lines

So I bought a Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU, but it does not work. Would somebody willing to get this device working? I can sent the device to you if you like.

The device information is attached in this email.

It is supported.
http://linuxtv.org/hg/~anttip/af9015/rev/d4274bbb8605

Please install latest v4l-dvb -drivers.

regards
Antti

Signature · 6 lines
http://palosaari.fi/

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
#2 lore raw
Quoted 9 lines · Antti Palosaari
Quoted 8 lines · Jelle de Jong

Hello everybody,

Apparently I was feeling a bit masochistic today, because I bought a new usb dvb-t device with the hope it would work on my 2.6.26 kernel because the 2.6.29 is extreme instable and my Digittrade DVB-T USB Stick (Afatech DVB-T) (af9015.fw) does not work with mplayer which is a requirement for me.

Quoted 7 lines
Quoted 5 lines

So I bought a Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU, but it does not work. Would somebody willing to get this device working? I can sent the device to you if you like.

The device information is attached in this email.

It is supported.

Oops, it is not supported. You have hw version 2, supported one is hw version 3. I will add this usb id soon. Thanks.

Quoted 3 lines

http://linuxtv.org/hg/~anttip/af9015/rev/d4274bbb8605

Please install latest v4l-dvb -drivers.

regards
Antti

Signature · 6 lines
http://palosaari.fi/

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
author
#3 lore raw
In reply to Antti Palosaari
Quoted 14 lines · Antti Palosaari
Quoted 7 lines · Jelle de Jong

Hello everybody,

Apparently I was feeling a bit masochistic today, because I bought a new usb dvb-t device with the hope it would work on my 2.6.26 kernel because the 2.6.29 is extreme instable and my Digittrade DVB-T USB Stick (Afatech DVB-T) (af9015.fw) does not work with mplayer which is a requirement for me.

Quoted 5 lines

So I bought a Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU, but it does not work. Would somebody willing to get this device working? I can sent the device to you if you like.

The device information is attached in this email.

Quoted 7 lines

It is supported.
http://linuxtv.org/hg/~anttip/af9015/rev/d4274bbb8605

Please install latest v4l-dvb -drivers.

regards
Antti

Hi Antti,

Quoted 1 line
Quoted 1 line

Add USB ID (1b80:e397) for Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0.

Thank you for your reply, the commit tells me an other product and vendor id, please see my attached device info in my first mail.

I got an USB ID 14aa:0160 Conceptronic USB2.0 DVB-T CTVDIGRCU V2.0 but I have no idea what chipsets it contains. Could somebody extract the drivers to be sure? (see my first mail for driver web pages)
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=0&tabid=420&pc=CTVDIGRCU

Best regards,

Jelle

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#4 lore raw
Quoted 4 lines · Jelle de Jong

I got an USB ID 14aa:0160 Conceptronic USB2.0 DVB-T CTVDIGRCU V2.0 but I have no idea what chipsets it contains. Could somebody extract the drivers to be sure? (see my first mail for driver web pages)
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=0&tabid=420&pc=CTVDIGRCU

There is no drivers for device USB-ID 14aa:0160.

; Copyright (C) Wideviewer Corporation, 2005 All Rights Reserved. ;
; USB DVB-T Adapter
; WideViewer DVB-T WT-225U

; The Vendor ID =14AA, and the Product ID =0226 %DevModel.DeviceDesc%=DevModel.Dev,USB\VID_14AA&PID_0226&MI_00

According to google search it could be Realtek.
http://ubuntuforums.org/showthread.php?t=822291&page=2

regards
Antti

Signature · 6 lines
http://palosaari.fi/

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
author
#5 lore raw
Quoted 13 lines · Antti Palosaari
Quoted 4 lines · Jelle de Jong

I got an USB ID 14aa:0160 Conceptronic USB2.0 DVB-T CTVDIGRCU V2.0 but I have no idea what chipsets it contains. Could somebody extract the drivers to be sure? (see my first mail for driver web pages)
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=0&tabid=420&pc=CTVDIGRCU

There is no drivers for device USB-ID 14aa:0160.

; Copyright (C) Wideviewer Corporation, 2005 All Rights Reserved. ;
; USB DVB-T Adapter
; WideViewer DVB-T WT-225U

Quoted 8 lines

; The Vendor ID =14AA, and the Product ID =0226 %DevModel.DeviceDesc%=DevModel.Dev,USB\VID_14AA&PID_0226&MI_00

According to google search it could be Realtek.
http://ubuntuforums.org/showthread.php?t=822291&page=2

regards
Antti

Would somebody be willing to get this device to work with the upstream v4l systems? I can sent the device to you. If not I can also return the device back to the store. Just sent me an email.

Cheers,

Jelle

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#6 lore raw
Quoted 3 lines · Jelle de Jong

Would somebody be willing to get this device to work with the upstream v4l systems? I can sent the device to you. If not I can also return the device back to the store. Just sent me an email.

I can try. At least some basic driver stub which just works is possible to do usually even without specs if tuner chip have one that does have Linux driver. Most likely it does have tuner that is supported because almost every DVB-T silicon tuner have some kind of driver currently.

regards
Antti

Signature · 6 lines
http://palosaari.fi/

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
author
#7 lore raw
Quoted 5 lines · Antti Palosaari
Quoted 3 lines · Jelle de Jong

Would somebody be willing to get this device to work with the upstream v4l systems? I can sent the device to you. If not I can also return the device back to the store. Just sent me an email.

Quoted 7 lines

I can try. At least some basic driver stub which just works is possible to do usually even without specs if tuner chip have one that does have Linux driver. Most likely it does have tuner that is supported because almost every DVB-T silicon tuner have some kind of driver currently.

regards
Antti

Thank you! I will sent the device to you somewhere in the next two weeks, I received your private email with your address data. I will sent a mail when the package is posted.

Best regards,

Jelle de Jong

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#8 lore raw
Quoted 10 lines · Jelle de Jong
Quoted 9 lines · Antti Palosaari
Quoted 3 lines · Jelle de Jong

Would somebody be willing to get this device to work with the upstream v4l systems? I can sent the device to you. If not I can also return the device back to the store. Just sent me an email.

I can try. At least some basic driver stub which just works is possible to do usually even without specs if tuner chip have one that does have Linux driver. Most likely it does have tuner that is supported because almost every DVB-T silicon tuner have some kind of driver currently.

Quoted 6 lines
Quoted 2 lines

regards
Antti

Thank you! I will sent the device to you somewhere in the next two weeks, I received your private email with your address data. I will sent a mail when the package is posted.

Why your mails (CC'd correctly) are not arrived to the list? Not yesterday, not today.

regards
Antti

Signature · 6 lines
http://palosaari.fi/

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
#9 lore raw
Quoted 2 lines · Antti Palosaari

Why your mails (CC'd correctly) are not arrived to the list? Not yesterday, not today.

Oops, my fault. My list settings again. I don't write to this list usually so I din't find that earlier. Sorry.

Antti

Signature · 6 lines
http://palosaari.fi/

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
author
#10 lore raw
In reply to Antti Palosaari
Quoted 17 lines · Antti Palosaari
Quoted 10 lines · Jelle de Jong
Quoted 9 lines · Antti Palosaari
Quoted 3 lines · Jelle de Jong

Would somebody be willing to get this device to work with the upstream v4l systems? I can sent the device to you. If not I can also return the device back to the store. Just sent me an email.

I can try. At least some basic driver stub which just works is possible to do usually even without specs if tuner chip have one that does have Linux driver. Most likely it does have tuner that is supported because almost every DVB-T silicon tuner have some kind of driver currently.

Quoted 5 lines
Quoted 2 lines

regards
Antti

Thank you! I will sent the device to you somewhere in the next two weeks, I received your private email with your address data. I will sent a mail when the package is posted.

Quoted 5 lines

Why your mails (CC'd correctly) are not arrived to the list? Not yesterday, not today.

regards
Antti

I don't know, all mails I sent to the CC [email protected] do arrive at the archives of the mailinglist. Maybe somebody enabled the mailman policy to not sent mails mails to both the list and the personal emails. Somebody knows what goes on?

Cheers,

Jelle

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

author
#11 lore raw
In reply to Antti Palosaari
Quoted 5 lines · Antti Palosaari
Quoted 3 lines · Jelle de Jong

Would somebody be willing to get this device to work with the upstream v4l systems? I can sent the device to you. If not I can also return the device back to the store. Just sent me an email.

Quoted 7 lines

I can try. At least some basic driver stub which just works is possible to do usually even without specs if tuner chip have one that does have Linux driver. Most likely it does have tuner that is supported because almost every DVB-T silicon tuner have some kind of driver currently.

regards
Antti

Hi Antti,

Sorry for the delay, the package has been lying here for a few weeks. I have sent the device today so I hope it will arrive soon.

Best regards,

Jelle

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#12 lore raw
In reply to Antti Palosaari

Terve Jelle,

Quoted 14 lines · Antti Palosaari
Quoted 5 lines · Jelle de Jong

I got an USB ID 14aa:0160 Conceptronic USB2.0 DVB-T CTVDIGRCU V2.0 but I have no idea what chipsets it contains. Could somebody extract the drivers to be sure? (see my first mail for driver web pages)
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=0&tabid=420&pc=CTVDIGRCU

There is no drivers for device USB-ID 14aa:0160.

; Copyright (C) Wideviewer Corporation, 2005 All Rights Reserved. ;
; USB DVB-T Adapter
; WideViewer DVB-T WT-225U

Quoted 5 lines

; The Vendor ID =14AA, and the Product ID =0226 %DevModel.DeviceDesc%=DevModel.Dev,USB\VID_14AA&PID_0226&MI_00

According to google search it could be Realtek.
http://ubuntuforums.org/showthread.php?t=822291&page=2

I just got that device from post. I installed driver from:
http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2
and it is working :(

Driver identifies this device as "Freecom USB 2.0 DVB-T Device".

I have don't know exactly what's driver status currently - is is only in development tree currently. Could Jan Hoogenraad comment what should do before driver is ready to the master release?

regards
Antti

Signature · 1 line
http://palosaari.fi/
author
#13 lore raw
Quoted 26 lines · Antti Palosaari

Terve Jelle,

Quoted 13 lines · Antti Palosaari
Quoted 5 lines · Jelle de Jong

I got an USB ID 14aa:0160 Conceptronic USB2.0 DVB-T CTVDIGRCU V2.0 but I have no idea what chipsets it contains. Could somebody extract the drivers to be sure? (see my first mail for driver web pages)
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=0&tabid=420&pc=CTVDIGRCU

There is no drivers for device USB-ID 14aa:0160.

; Copyright (C) Wideviewer Corporation, 2005 All Rights Reserved. ;
; USB DVB-T Adapter
; WideViewer DVB-T WT-225U

Quoted 5 lines

; The Vendor ID =14AA, and the Product ID =0226 %DevModel.DeviceDesc%=DevModel.Dev,USB\VID_14AA&PID_0226&MI_00

According to google search it could be Realtek.
http://ubuntuforums.org/showthread.php?t=822291&page=2

I just got that device from post. I installed driver from:
http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2
and it is working :(

Quoted 8 lines

Driver identifies this device as "Freecom USB 2.0 DVB-T Device".

I have don't know exactly what's driver status currently - is is only in development tree currently. Could Jan Hoogenraad comment what should do before driver is ready to the master release?

regards
Antti

That is great news, now lets see what is needed to get the code stable in the mainstream kernel code. So it will work out of the box with the upcoming kernel releases.

Did you need any proprietary firmware?

Does the device work with mplayer does the dvb-t radio work?

Cheers,

Jelle

#14 lore raw
Quoted 3 lines · Jelle de Jong

That is great news, now lets see what is needed to get the code stable in the mainstream kernel code. So it will work out of the box with the upcoming kernel releases.

Yes, waiting for info...

Currently I don't have time for developing this and I don't even want put my fingers to this soap if there is someone else working actively.

Quoted 1 line

Did you need any proprietary firmware?

Looks like no firmware needed at all.

Quoted 1 line

Does the device work with mplayer does the dvb-t radio work?

Works with mplayer. But radio didn't start to play for reason or other. Totem-xine plays also radio but sound cuts all the time. And now when switch channels it also hangs and stick should be re-plugged. Seems like many issues and that's why it is still in the development :)

regards
Antti

Signature · 1 line
http://palosaari.fi/
#15 lore raw
In reply to Jelle de Jong
Quoted 41 lines · Jelle de Jong
Quoted 25 lines · Antti Palosaari

Terve Jelle,

Quoted 13 lines · Antti Palosaari
Quoted 5 lines · Jelle de Jong

I got an USB ID 14aa:0160 Conceptronic USB2.0 DVB-T CTVDIGRCU V2.0 but I have no idea what chipsets it contains. Could somebody extract the drivers to be sure? (see my first mail for driver web pages)
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=0&tabid=420&pc=CTVDIGRCU

There is no drivers for device USB-ID 14aa:0160.

; Copyright (C) Wideviewer Corporation, 2005 All Rights Reserved. ;
; USB DVB-T Adapter
; WideViewer DVB-T WT-225U

Quoted 5 lines

; The Vendor ID =14AA, and the Product ID =0226 %DevModel.DeviceDesc%=DevModel.Dev,USB\VID_14AA&PID_0226&MI_00

According to google search it could be Realtek.
http://ubuntuforums.org/showthread.php?t=822291&page=2

I just got that device from post. I installed driver from:
http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2
and it is working :(

Quoted 6 lines

Driver identifies this device as "Freecom USB 2.0 DVB-T Device".

I have don't know exactly what's driver status currently - is is only in development tree currently. Could Jan Hoogenraad comment what should do before driver is ready to the master release?

regards
Antti

That is great news, now lets see what is needed to get the code stable in the mainstream kernel code. So it will work out of the box with the upcoming kernel releases.

Did you need any proprietary firmware?

Does the device work with mplayer does the dvb-t radio work?

Quoted 8 lines

Cheers,

Jelle
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

In kernel integration: I'll re-post my entry of september 16, 2008.
This entry is still valid.
I have updated working repository rtl2831-r2 on a regular basis, both for syning with the kernel, and updating e.g. USB-IDs.

I've posted the same message on a list where there was some other activity, but got no response yet.
http://ubuntuforums.org/showthread.php?t=960113&page=2

------------------

The repository at http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2.
Thus:

Quoted 3 lines

hg clone http://linuxtv.org/hg/~jhoogenraad/rtl2831-r2
make
make install

should be working at all times. I synchronise it once in a while to keep it running.

Splitting the code up into front-end and back-end is more of a hassle than I assumed. I'm struggling with the old include files, the data structures (where used) and the linux interface protocols in general.

A version that does not even compile (NO USE FOR END USERS !)
http://linuxtv.org/hg/~jhoogenraad/rtl2831-sepfront
I have synched the version with the version on my harddisk.

Part of the code is already recycled into the kernel.
As Alistair noticed, this is now blocking for getting the support for the stick into the main line. A pity for the users,

Quoted 59 lines · Peter Mayer
Quoted 59 lines

--- Steven Toth <[email protected]> schrieb am So, 14.9.2008:

Quoted 6 lines
Quoted 6 lines
Quoted 1 line
Quoted 1 line

So, I wonder now what the next steps are to make

this driver available in the linux kernel, and when it will probably happen.
I gather the tree has some significant merge issues,
that's probably why it hasn't been merged. Generally if the drivers are legally clean, code clean they get merged in a couple of weeks.

Sorry if I need to ask again, but what does this actually mean with respect to that specific driver rtl2821u? I just wonder.

My problem is that in Ubuntu Hardy I managed to make this stick work, but in Debian SID I have no idea how to get it work. When I do

hg clone http://linuxtv.org/hg/v4l-dvb
make
make install

the stick is not recognized. The entries in /var/log/syslog are:

Sep 15 23:35:55  kernel: usb 3-3: New USB device found, idVendor=14aa, idProduct=0160
Sep 15 23:35:55  kernel: usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 15 23:35:55  kernel: usb 3-3: Product: DTV Receiver
Sep 15 23:35:55  kernel: usb 3-3: Manufacturer: DTV Receiver
Sep 15 23:35:55  kernel: usb 3-3: SerialNumber: 0000000000010205

When I unpack and make & make install rtl2831u_dvb-usb_v0.0.2mod, syslog says:

Sep 15 23:40:17  kernel: usb 3-3: new high speed USB device using ehci_hcd and address 3
Sep 15 23:40:17  kernel: usb 3-3: configuration #1 chosen from 1 choice
Sep 15 23:40:17  kernel: usb 3-3: New USB device found, idVendor=14aa, idProduct=0160
Sep 15 23:40:17  kernel: usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 15 23:40:17  kernel: usb 3-3: Product: DTV Receiver
Sep 15 23:40:17  kernel: usb 3-3: Manufacturer: DTV Receiver
Sep 15 23:40:17  kernel: usb 3-3: SerialNumber: 0000000000010205
Sep 15 23:40:17  NetworkManager: <debug> [1221514817.598859] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_14aa_160_0000000000010205').
Sep 15 23:40:17  NetworkManager: <debug> [1221514817.602281] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_14aa_160_0000000000010205_usbraw').
Sep 15 23:40:17  kernel: dvb-usb: found a 'Freecom USB 2.0 DVB-T Device' in warm state.
Sep 15 23:40:17  kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Sep 15 23:40:17  udevd-event[3309]: run_program: '/sbin/modprobe' abnormal exit
Sep 15 23:40:17  NetworkManager: <debug> [1221514817.795519] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_14aa_160_0000000000010205_if0').

So, what can I try to make this stick work in Debian SID?

Greetings,
Peter

__________________________________________________
Do You Yahoo!?
Sie sind Spam leid? Yahoo! Mail verfügt über einen herausragenden Schutz gegen Massenmails.
http://mail.yahoo.com

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Signature · 4 lines
Jan Hoogenraad
Hoogenraad Interface Services
Postbus 2717
3500 GS Utrecht