sh: sm501: Eliminates TABs from sm501 related files
PATCH 1/1 sh: sm501: Eliminates TABs from sm501 related files
This patch simply removes TABs from 'sm501.c' and 'sm501_template.h', to be more consistent with CODING_STYLE.
Signed-off-by Shin-ichiro KAWASAKI <[email protected]>
hw/sm501.c +515 -515
@@ -59,391 +59,391 @@/* System Configuration area */ /* System config base */ -#define SM501_SYS_CONFIG (0x000000) +#define SM501_SYS_CONFIG (0x000000)/* config 1 */ -#define SM501_SYSTEM_CONTROL (0x000000) +#define SM501_SYSTEM_CONTROL (0x000000) -#define SM501_SYSCTRL_PANEL_TRISTATE (1<<0) -#define SM501_SYSCTRL_MEM_TRISTATE (1<<1) -#define SM501_SYSCTRL_CRT_TRISTATE (1<<2) +#define SM501_SYSCTRL_PANEL_TRISTATE (1<<0) +#define SM501_SYSCTRL_MEM_TRISTATE (1<<1) +#define SM501_SYSCTRL_CRT_TRISTATE (1<<2) -#define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4) -#define SM501_SYSCTRL_PCI_SLAVE_BURST_1 (0<<4) -#define SM501_SYSCTRL_PCI_SLAVE_BURST_2 (1<<4) -#define SM501_SYSCTRL_PCI_SLAVE_BURST_4 (2<<4) -#define SM501_SYSCTRL_PCI_SLAVE_BURST_8 (3<<4) +#define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4) +#define SM501_SYSCTRL_PCI_SLAVE_BURST_1 (0<<4) +#define SM501_SYSCTRL_PCI_SLAVE_BURST_2 (1<<4) +#define SM501_SYSCTRL_PCI_SLAVE_BURST_4 (2<<4) +#define SM501_SYSCTRL_PCI_SLAVE_BURST_8 (3<<4) -#define SM501_SYSCTRL_PCI_CLOCK_RUN_EN (1<<6) -#define SM501_SYSCTRL_PCI_RETRY_DISABLE (1<<7) -#define SM501_SYSCTRL_PCI_SUBSYS_LOCK (1<<11) -#define SM501_SYSCTRL_PCI_BURST_READ_EN (1<<15) +#define SM501_SYSCTRL_PCI_CLOCK_RUN_EN (1<<6) +#define SM501_SYSCTRL_PCI_RETRY_DISABLE (1<<7) +#define SM501_SYSCTRL_PCI_SUBSYS_LOCK (1<<11) +#define SM501_SYSCTRL_PCI_BURST_READ_EN (1<<15)/* miscellaneous control */ -#define SM501_MISC_CONTROL (0x000004) +#define SM501_MISC_CONTROL (0x000004) -#define SM501_MISC_BUS_SH (0x0) -#define SM501_MISC_BUS_PCI (0x1) -#define SM501_MISC_BUS_XSCALE (0x2) -#define SM501_MISC_BUS_NEC (0x6) -#define SM501_MISC_BUS_MASK (0x7) +#define SM501_MISC_BUS_SH (0x0) +#define SM501_MISC_BUS_PCI (0x1) +#define SM501_MISC_BUS_XSCALE (0x2) +#define SM501_MISC_BUS_NEC (0x6) +#define SM501_MISC_BUS_MASK (0x7) -#define SM501_MISC_VR_62MB (1<<3) -#define SM501_MISC_CDR_RESET (1<<7) -#define SM501_MISC_USB_LB (1<<8) -#define SM501_MISC_USB_SLAVE (1<<9) -#define SM501_MISC_BL_1 (1<<10) -#define SM501_MISC_MC (1<<11) -#define SM501_MISC_DAC_POWER (1<<12) -#define SM501_MISC_IRQ_INVERT (1<<16) -#define SM501_MISC_SH (1<<17) +#define SM501_MISC_VR_62MB (1<<3) +#define SM501_MISC_CDR_RESET (1<<7) +#define SM501_MISC_USB_LB (1<<8) +#define SM501_MISC_USB_SLAVE (1<<9) +#define SM501_MISC_BL_1 (1<<10) +#define SM501_MISC_MC (1<<11) +#define SM501_MISC_DAC_POWER (1<<12) +#define SM501_MISC_IRQ_INVERT (1<<16) +#define SM501_MISC_SH (1<<17) -#define SM501_MISC_HOLD_EMPTY (0<<18) -#define SM501_MISC_HOLD_8 (1<<18) -#define SM501_MISC_HOLD_16 (2<<18) -#define SM501_MISC_HOLD_24 (3<<18) -#define SM501_MISC_HOLD_32 (4<<18) -#define SM501_MISC_HOLD_MASK (7<<18) +#define SM501_MISC_HOLD_EMPTY (0<<18) +#define SM501_MISC_HOLD_8 (1<<18) +#define SM501_MISC_HOLD_16 (2<<18) +#define SM501_MISC_HOLD_24 (3<<18) +#define SM501_MISC_HOLD_32 (4<<18) +#define SM501_MISC_HOLD_MASK (7<<18) -#define SM501_MISC_FREQ_12 (1<<24) -#define SM501_MISC_PNL_24BIT (1<<25) -#define SM501_MISC_8051_LE (1<<26) +#define SM501_MISC_FREQ_12 (1<<24) +#define SM501_MISC_PNL_24BIT (1<<25) +#define SM501_MISC_8051_LE (1<<26) -#define SM501_GPIO31_0_CONTROL (0x000008) -#define SM501_GPIO63_32_CONTROL (0x00000C) -#define SM501_DRAM_CONTROL (0x000010) +#define SM501_GPIO31_0_CONTROL (0x000008) +#define SM501_GPIO63_32_CONTROL (0x00000C) +#define SM501_DRAM_CONTROL (0x000010)/* command list */ -#define SM501_ARBTRTN_CONTROL (0x000014) +#define SM501_ARBTRTN_CONTROL (0x000014)/* command list */ -#define SM501_COMMAND_LIST_STATUS (0x000024) +#define SM501_COMMAND_LIST_STATUS (0x000024)/* interrupt debug */ -#define SM501_RAW_IRQ_STATUS (0x000028) -#define SM501_RAW_IRQ_CLEAR (0x000028) -#define SM501_IRQ_STATUS (0x00002C) -#define SM501_IRQ_MASK (0x000030) -#define SM501_DEBUG_CONTROL (0x000034) +#define SM501_RAW_IRQ_STATUS (0x000028) +#define SM501_RAW_IRQ_CLEAR (0x000028) +#define SM501_IRQ_STATUS (0x00002C) +#define SM501_IRQ_MASK (0x000030) +#define SM501_DEBUG_CONTROL (0x000034)/* power management */ -#define SM501_POWERMODE_P2X_SRC (1<<29) -#define SM501_POWERMODE_V2X_SRC (1<<20) -#define SM501_POWERMODE_M_SRC (1<<12) -#define SM501_POWERMODE_M1_SRC (1<<4) +#define SM501_POWERMODE_P2X_SRC (1<<29) +#define SM501_POWERMODE_V2X_SRC (1<<20) +#define SM501_POWERMODE_M_SRC (1<<12) +#define SM501_POWERMODE_M1_SRC (1<<4) -#define SM501_CURRENT_GATE (0x000038) -#define SM501_CURRENT_CLOCK (0x00003C) -#define SM501_POWER_MODE_0_GATE (0x000040) -#define SM501_POWER_MODE_0_CLOCK (0x000044) -#define SM501_POWER_MODE_1_GATE (0x000048) -#define SM501_POWER_MODE_1_CLOCK (0x00004C) -#define SM501_SLEEP_MODE_GATE (0x000050) -#define SM501_POWER_MODE_CONTROL (0x000054) +#define SM501_CURRENT_GATE (0x000038) +#define SM501_CURRENT_CLOCK (0x00003C) +#define SM501_POWER_MODE_0_GATE (0x000040) +#define SM501_POWER_MODE_0_CLOCK (0x000044) +#define SM501_POWER_MODE_1_GATE (0x000048) +#define SM501_POWER_MODE_1_CLOCK (0x00004C) +#define SM501_SLEEP_MODE_GATE (0x000050) +#define SM501_POWER_MODE_CONTROL (0x000054)/* power gates for units within the 501 */ -#define SM501_GATE_HOST (0) -#define SM501_GATE_MEMORY (1) -#define SM501_GATE_DISPLAY (2) -#define SM501_GATE_2D_ENGINE (3) -#define SM501_GATE_CSC (4) -#define SM501_GATE_ZVPORT (5) -#define SM501_GATE_GPIO (6) -#define SM501_GATE_UART0 (7) -#define SM501_GATE_UART1 (8) -#define SM501_GATE_SSP (10) -#define SM501_GATE_USB_HOST (11) -#define SM501_GATE_USB_GADGET (12) -#define SM501_GATE_UCONTROLLER (17) -#define SM501_GATE_AC97 (18) +#define SM501_GATE_HOST (0) +#define SM501_GATE_MEMORY (1) +#define SM501_GATE_DISPLAY (2) +#define SM501_GATE_2D_ENGINE (3) +#define SM501_GATE_CSC (4) +#define SM501_GATE_ZVPORT (5) +#define SM501_GATE_GPIO (6) +#define SM501_GATE_UART0 (7) +#define SM501_GATE_UART1 (8) +#define SM501_GATE_SSP (10) +#define SM501_GATE_USB_HOST (11) +#define SM501_GATE_USB_GADGET (12) +#define SM501_GATE_UCONTROLLER (17) +#define SM501_GATE_AC97 (18)/* panel clock */ -#define SM501_CLOCK_P2XCLK (24) +#define SM501_CLOCK_P2XCLK (24)/* crt clock */ -#define SM501_CLOCK_V2XCLK (16) +#define SM501_CLOCK_V2XCLK (16)/* main clock */ -#define SM501_CLOCK_MCLK (8) +#define SM501_CLOCK_MCLK (8)/* SDRAM controller clock */ -#define SM501_CLOCK_M1XCLK (0) +#define SM501_CLOCK_M1XCLK (0)/* config 2 */ -#define SM501_PCI_MASTER_BASE (0x000058) -#define SM501_ENDIAN_CONTROL (0x00005C) -#define SM501_DEVICEID (0x000060) +#define SM501_PCI_MASTER_BASE (0x000058) +#define SM501_ENDIAN_CONTROL (0x00005C) +#define SM501_DEVICEID (0x000060)/* 0x050100A0 */ -#define SM501_DEVICEID_SM501 (0x05010000) -#define SM501_DEVICEID_IDMASK (0xffff0000) -#define SM501_DEVICEID_REVMASK (0x000000ff) +#define SM501_DEVICEID_SM501 (0x05010000) +#define SM501_DEVICEID_IDMASK (0xffff0000) +#define SM501_DEVICEID_REVMASK (0x000000ff) -#define SM501_PLLCLOCK_COUNT (0x000064) -#define SM501_MISC_TIMING (0x000068) -#define SM501_CURRENT_SDRAM_CLOCK (0x00006C) +#define SM501_PLLCLOCK_COUNT (0x000064) +#define SM501_MISC_TIMING (0x000068) +#define SM501_CURRENT_SDRAM_CLOCK (0x00006C) -#define SM501_PROGRAMMABLE_PLL_CONTROL (0x000074) +#define SM501_PROGRAMMABLE_PLL_CONTROL (0x000074)/* GPIO base */ -#define SM501_GPIO (0x010000) -#define SM501_GPIO_DATA_LOW (0x00) -#define SM501_GPIO_DATA_HIGH (0x04) -#define SM501_GPIO_DDR_LOW (0x08) -#define SM501_GPIO_DDR_HIGH (0x0C) -#define SM501_GPIO_IRQ_SETUP (0x10) -#define SM501_GPIO_IRQ_STATUS (0x14) -#define SM501_GPIO_IRQ_RESET (0x14) +#define SM501_GPIO (0x010000) +#define SM501_GPIO_DATA_LOW (0x00) +#define SM501_GPIO_DATA_HIGH (0x04) +#define SM501_GPIO_DDR_LOW (0x08) +#define SM501_GPIO_DDR_HIGH (0x0C) +#define SM501_GPIO_IRQ_SETUP (0x10) +#define SM501_GPIO_IRQ_STATUS (0x14) +#define SM501_GPIO_IRQ_RESET (0x14)/* I2C controller base */ -#define SM501_I2C (0x010040) -#define SM501_I2C_BYTE_COUNT (0x00) -#define SM501_I2C_CONTROL (0x01) -#define SM501_I2C_STATUS (0x02) -#define SM501_I2C_RESET (0x02) -#define SM501_I2C_SLAVE_ADDRESS (0x03) -#define SM501_I2C_DATA (0x04) +#define SM501_I2C (0x010040) +#define SM501_I2C_BYTE_COUNT (0x00) +#define SM501_I2C_CONTROL (0x01) +#define SM501_I2C_STATUS (0x02) +#define SM501_I2C_RESET (0x02) +#define SM501_I2C_SLAVE_ADDRESS (0x03) +#define SM501_I2C_DATA (0x04)/* SSP base */ -#define SM501_SSP (0x020000) +#define SM501_SSP (0x020000)/* Uart 0 base */ -#define SM501_UART0 (0x030000) +#define SM501_UART0 (0x030000)/* Uart 1 base */ -#define SM501_UART1 (0x030020) +#define SM501_UART1 (0x030020)/* USB host port base */ -#define SM501_USB_HOST (0x040000) +#define SM501_USB_HOST (0x040000)/* USB slave/gadget base */ -#define SM501_USB_GADGET (0x060000) +#define SM501_USB_GADGET (0x060000)/* USB slave/gadget data port base */ -#define SM501_USB_GADGET_DATA (0x070000) +#define SM501_USB_GADGET_DATA (0x070000)/* Display controller/video engine base */ -#define SM501_DC (0x080000) +#define SM501_DC (0x080000)/* common defines for the SM501 address registers */ -#define SM501_ADDR_FLIP (1<<31) -#define SM501_ADDR_EXT (1<<27) -#define SM501_ADDR_CS1 (1<<26) -#define SM501_ADDR_MASK (0x3f << 26) +#define SM501_ADDR_FLIP (1<<31) +#define SM501_ADDR_EXT (1<<27) +#define SM501_ADDR_CS1 (1<<26) +#define SM501_ADDR_MASK (0x3f << 26) -#define SM501_FIFO_MASK (0x3 << 16) -#define SM501_FIFO_1 (0x0 << 16) -#define SM501_FIFO_3 (0x1 << 16) -#define SM501_FIFO_7 (0x2 << 16) -#define SM501_FIFO_11 (0x3 << 16) +#define SM501_FIFO_MASK (0x3 << 16) +#define SM501_FIFO_1 (0x0 << 16) +#define SM501_FIFO_3 (0x1 << 16) +#define SM501_FIFO_7 (0x2 << 16) +#define SM501_FIFO_11 (0x3 << 16)/* common registers for panel and the crt */ -#define SM501_OFF_DC_H_TOT (0x000) -#define SM501_OFF_DC_V_TOT (0x008) -#define SM501_OFF_DC_H_SYNC (0x004) -#define SM501_OFF_DC_V_SYNC (0x00C) +#define SM501_OFF_DC_H_TOT (0x000) +#define SM501_OFF_DC_V_TOT (0x008) +#define SM501_OFF_DC_H_SYNC (0x004) +#define SM501_OFF_DC_V_SYNC (0x00C) -#define SM501_DC_PANEL_CONTROL (0x000) +#define SM501_DC_PANEL_CONTROL (0x000) -#define SM501_DC_PANEL_CONTROL_FPEN (1<<27) -#define SM501_DC_PANEL_CONTROL_BIAS (1<<26) -#define SM501_DC_PANEL_CONTROL_DATA (1<<25) -#define SM501_DC_PANEL_CONTROL_VDD (1<<24) -#define SM501_DC_PANEL_CONTROL_DP (1<<23) +#define SM501_DC_PANEL_CONTROL_FPEN (1<<27) +#define SM501_DC_PANEL_CONTROL_BIAS (1<<26) +#define SM501_DC_PANEL_CONTROL_DATA (1<<25) +#define SM501_DC_PANEL_CONTROL_VDD (1<<24) +#define SM501_DC_PANEL_CONTROL_DP (1<<23) -#define SM501_DC_PANEL_CONTROL_TFT_888 (0<<21) -#define SM501_DC_PANEL_CONTROL_TFT_333 (1<<21) -#define SM501_DC_PANEL_CONTROL_TFT_444 (2<<21) +#define SM501_DC_PANEL_CONTROL_TFT_888 (0<<21) +#define SM501_DC_PANEL_CONTROL_TFT_333 (1<<21) +#define SM501_DC_PANEL_CONTROL_TFT_444 (2<<21) -#define SM501_DC_PANEL_CONTROL_DE (1<<20) +#define SM501_DC_PANEL_CONTROL_DE (1<<20) -#define SM501_DC_PANEL_CONTROL_LCD_TFT (0<<18) -#define SM501_DC_PANEL_CONTROL_LCD_STN8 (1<<18) -#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18) +#define SM501_DC_PANEL_CONTROL_LCD_TFT (0<<18) +#define SM501_DC_PANEL_CONTROL_LCD_STN8 (1<<18) +#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18) -#define SM501_DC_PANEL_CONTROL_CP (1<<14) -#define SM501_DC_PANEL_CONTROL_VSP (1<<13) -#define SM501_DC_PANEL_CONTROL_HSP (1<<12) -#define SM501_DC_PANEL_CONTROL_CK (1<<9) -#define SM501_DC_PANEL_CONTROL_TE (1<<8) -#define SM501_DC_PANEL_CONTROL_VPD (1<<7) -#define SM501_DC_PANEL_CONTROL_VP (1<<6) -#define SM501_DC_PANEL_CONTROL_HPD (1<<5) -#define SM501_DC_PANEL_CONTROL_HP (1<<4) -#define SM501_DC_PANEL_CONTROL_GAMMA (1<<3) -#define SM501_DC_PANEL_CONTROL_EN (1<<2) +#define SM501_DC_PANEL_CONTROL_CP (1<<14) +#define SM501_DC_PANEL_CONTROL_VSP (1<<13) +#define SM501_DC_PANEL_CONTROL_HSP (1<<12) +#define SM501_DC_PANEL_CONTROL_CK (1<<9) +#define SM501_DC_PANEL_CONTROL_TE (1<<8) +#define SM501_DC_PANEL_CONTROL_VPD (1<<7) +#define SM501_DC_PANEL_CONTROL_VP (1<<6) +#define SM501_DC_PANEL_CONTROL_HPD (1<<5) +#define SM501_DC_PANEL_CONTROL_HP (1<<4) +#define SM501_DC_PANEL_CONTROL_GAMMA (1<<3) +#define SM501_DC_PANEL_CONTROL_EN (1<<2) -#define SM501_DC_PANEL_CONTROL_8BPP (0<<0) -#define SM501_DC_PANEL_CONTROL_16BPP (1<<0) -#define SM501_DC_PANEL_CONTROL_32BPP (2<<0) +#define SM501_DC_PANEL_CONTROL_8BPP (0<<0) +#define SM501_DC_PANEL_CONTROL_16BPP (1<<0) +#define SM501_DC_PANEL_CONTROL_32BPP (2<<0) -#define SM501_DC_PANEL_PANNING_CONTROL (0x004) -#define SM501_DC_PANEL_COLOR_KEY (0x008) -#define SM501_DC_PANEL_FB_ADDR (0x00C) -#define SM501_DC_PANEL_FB_OFFSET (0x010) -#define SM501_DC_PANEL_FB_WIDTH (0x014) -#define SM501_DC_PANEL_FB_HEIGHT (0x018) -#define SM501_DC_PANEL_TL_LOC (0x01C) -#define SM501_DC_PANEL_BR_LOC (0x020) -#define SM501_DC_PANEL_H_TOT (0x024) -#define SM501_DC_PANEL_H_SYNC (0x028) -#define SM501_DC_PANEL_V_TOT (0x02C) -#define SM501_DC_PANEL_V_SYNC (0x030) -#define SM501_DC_PANEL_CUR_LINE (0x034) +#define SM501_DC_PANEL_PANNING_CONTROL (0x004) +#define SM501_DC_PANEL_COLOR_KEY (0x008) +#define SM501_DC_PANEL_FB_ADDR (0x00C) +#define SM501_DC_PANEL_FB_OFFSET (0x010) +#define SM501_DC_PANEL_FB_WIDTH (0x014) +#define SM501_DC_PANEL_FB_HEIGHT (0x018) +#define SM501_DC_PANEL_TL_LOC (0x01C) +#define SM501_DC_PANEL_BR_LOC (0x020) +#define SM501_DC_PANEL_H_TOT (0x024) +#define SM501_DC_PANEL_H_SYNC (0x028) +#define SM501_DC_PANEL_V_TOT (0x02C) +#define SM501_DC_PANEL_V_SYNC (0x030) +#define SM501_DC_PANEL_CUR_LINE (0x034) -#define SM501_DC_VIDEO_CONTROL (0x040) -#define SM501_DC_VIDEO_FB0_ADDR (0x044) -#define SM501_DC_VIDEO_FB_WIDTH (0x048) -#define SM501_DC_VIDEO_FB0_LAST_ADDR (0x04C) -#define SM501_DC_VIDEO_TL_LOC (0x050) -#define SM501_DC_VIDEO_BR_LOC (0x054) -#define SM501_DC_VIDEO_SCALE (0x058) -#define SM501_DC_VIDEO_INIT_SCALE (0x05C) -#define SM501_DC_VIDEO_YUV_CONSTANTS (0x060) -#define SM501_DC_VIDEO_FB1_ADDR (0x064) -#define SM501_DC_VIDEO_FB1_LAST_ADDR (0x068) +#define SM501_DC_VIDEO_CONTROL (0x040) +#define SM501_DC_VIDEO_FB0_ADDR (0x044) +#define SM501_DC_VIDEO_FB_WIDTH (0x048) +#define SM501_DC_VIDEO_FB0_LAST_ADDR (0x04C) +#define SM501_DC_VIDEO_TL_LOC (0x050) +#define SM501_DC_VIDEO_BR_LOC (0x054) +#define SM501_DC_VIDEO_SCALE (0x058) +#define SM501_DC_VIDEO_INIT_SCALE (0x05C) +#define SM501_DC_VIDEO_YUV_CONSTANTS (0x060) +#define SM501_DC_VIDEO_FB1_ADDR (0x064) +#define SM501_DC_VIDEO_FB1_LAST_ADDR (0x068) -#define SM501_DC_VIDEO_ALPHA_CONTROL (0x080) -#define SM501_DC_VIDEO_ALPHA_FB_ADDR (0x084) -#define SM501_DC_VIDEO_ALPHA_FB_OFFSET (0x088) -#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR (0x08C) -#define SM501_DC_VIDEO_ALPHA_TL_LOC (0x090) -#define SM501_DC_VIDEO_ALPHA_BR_LOC (0x094) -#define SM501_DC_VIDEO_ALPHA_SCALE (0x098) -#define SM501_DC_VIDEO_ALPHA_INIT_SCALE (0x09C) -#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY (0x0A0) -#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP (0x0A4) +#define SM501_DC_VIDEO_ALPHA_CONTROL (0x080) +#define SM501_DC_VIDEO_ALPHA_FB_ADDR (0x084) +#define SM501_DC_VIDEO_ALPHA_FB_OFFSET (0x088) +#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR (0x08C) +#define SM501_DC_VIDEO_ALPHA_TL_LOC (0x090) +#define SM501_DC_VIDEO_ALPHA_BR_LOC (0x094) +#define SM501_DC_VIDEO_ALPHA_SCALE (0x098) +#define SM501_DC_VIDEO_ALPHA_INIT_SCALE (0x09C) +#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY (0x0A0) +#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP (0x0A4) -#define SM501_DC_PANEL_HWC_BASE (0x0F0) -#define SM501_DC_PANEL_HWC_ADDR (0x0F0) -#define SM501_DC_PANEL_HWC_LOC (0x0F4) -#define SM501_DC_PANEL_HWC_COLOR_1_2 (0x0F8) -#define SM501_DC_PANEL_HWC_COLOR_3 (0x0FC) +#define SM501_DC_PANEL_HWC_BASE (0x0F0) +#define SM501_DC_PANEL_HWC_ADDR (0x0F0) +#define SM501_DC_PANEL_HWC_LOC (0x0F4) +#define SM501_DC_PANEL_HWC_COLOR_1_2 (0x0F8) +#define SM501_DC_PANEL_HWC_COLOR_3 (0x0FC) -#define SM501_HWC_EN (1<<31) +#define SM501_HWC_EN (1<<31) -#define SM501_OFF_HWC_ADDR (0x00) -#define SM501_OFF_HWC_LOC (0x04) -#define SM501_OFF_HWC_COLOR_1_2 (0x08) -#define SM501_OFF_HWC_COLOR_3 (0x0C) +#define SM501_OFF_HWC_ADDR (0x00) +#define SM501_OFF_HWC_LOC (0x04) +#define SM501_OFF_HWC_COLOR_1_2 (0x08) +#define SM501_OFF_HWC_COLOR_3 (0x0C) -#define SM501_DC_ALPHA_CONTROL (0x100) -#define SM501_DC_ALPHA_FB_ADDR (0x104) -#define SM501_DC_ALPHA_FB_OFFSET (0x108) -#define SM501_DC_ALPHA_TL_LOC (0x10C) -#define SM501_DC_ALPHA_BR_LOC (0x110) -#define SM501_DC_ALPHA_CHROMA_KEY (0x114) -#define SM501_DC_ALPHA_COLOR_LOOKUP (0x118) +#define SM501_DC_ALPHA_CONTROL (0x100) +#define SM501_DC_ALPHA_FB_ADDR (0x104) +#define SM501_DC_ALPHA_FB_OFFSET (0x108) +#define SM501_DC_ALPHA_TL_LOC (0x10C) +#define SM501_DC_ALPHA_BR_LOC (0x110) +#define SM501_DC_ALPHA_CHROMA_KEY (0x114) +#define SM501_DC_ALPHA_COLOR_LOOKUP (0x118) -#define SM501_DC_CRT_CONTROL (0x200) +#define SM501_DC_CRT_CONTROL (0x200) -#define SM501_DC_CRT_CONTROL_TVP (1<<15) -#define SM501_DC_CRT_CONTROL_CP (1<<14) -#define SM501_DC_CRT_CONTROL_VSP (1<<13) -#define SM501_DC_CRT_CONTROL_HSP (1<<12) -#define SM501_DC_CRT_CONTROL_VS (1<<11) -#define SM501_DC_CRT_CONTROL_BLANK (1<<10) -#define SM501_DC_CRT_CONTROL_SEL (1<<9) -#define SM501_DC_CRT_CONTROL_TE (1<<8) -#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4) -#define SM501_DC_CRT_CONTROL_GAMMA (1<<3) -#define SM501_DC_CRT_CONTROL_ENABLE (1<<2) +#define SM501_DC_CRT_CONTROL_TVP (1<<15) +#define SM501_DC_CRT_CONTROL_CP (1<<14) +#define SM501_DC_CRT_CONTROL_VSP (1<<13) +#define SM501_DC_CRT_CONTROL_HSP (1<<12) +#define SM501_DC_CRT_CONTROL_VS (1<<11) +#define SM501_DC_CRT_CONTROL_BLANK (1<<10) +#define SM501_DC_CRT_CONTROL_SEL (1<<9) +#define SM501_DC_CRT_CONTROL_TE (1<<8) +#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4) +#define SM501_DC_CRT_CONTROL_GAMMA (1<<3) +#define SM501_DC_CRT_CONTROL_ENABLE (1<<2) -#define SM501_DC_CRT_CONTROL_8BPP (0<<0) -#define SM501_DC_CRT_CONTROL_16BPP (1<<0) -#define SM501_DC_CRT_CONTROL_32BPP (2<<0) +#define SM501_DC_CRT_CONTROL_8BPP (0<<0) +#define SM501_DC_CRT_CONTROL_16BPP (1<<0) +#define SM501_DC_CRT_CONTROL_32BPP (2<<0) -#define SM501_DC_CRT_FB_ADDR (0x204) -#define SM501_DC_CRT_FB_OFFSET (0x208) -#define SM501_DC_CRT_H_TOT (0x20C) -#define SM501_DC_CRT_H_SYNC (0x210) -#define SM501_DC_CRT_V_TOT (0x214) -#define SM501_DC_CRT_V_SYNC (0x218) -#define SM501_DC_CRT_SIGNATURE_ANALYZER (0x21C) -#define SM501_DC_CRT_CUR_LINE (0x220) -#define SM501_DC_CRT_MONITOR_DETECT (0x224) +#define SM501_DC_CRT_FB_ADDR (0x204) +#define SM501_DC_CRT_FB_OFFSET (0x208) +#define SM501_DC_CRT_H_TOT (0x20C) +#define SM501_DC_CRT_H_SYNC (0x210) +#define SM501_DC_CRT_V_TOT (0x214) +#define SM501_DC_CRT_V_SYNC (0x218) +#define SM501_DC_CRT_SIGNATURE_ANALYZER (0x21C) +#define SM501_DC_CRT_CUR_LINE (0x220) +#define SM501_DC_CRT_MONITOR_DETECT (0x224) -#define SM501_DC_CRT_HWC_BASE (0x230) -#define SM501_DC_CRT_HWC_ADDR (0x230) -#define SM501_DC_CRT_HWC_LOC (0x234) -#define SM501_DC_CRT_HWC_COLOR_1_2 (0x238) -#define SM501_DC_CRT_HWC_COLOR_3 (0x23C) +#define SM501_DC_CRT_HWC_BASE (0x230) +#define SM501_DC_CRT_HWC_ADDR (0x230) +#define SM501_DC_CRT_HWC_LOC (0x234) +#define SM501_DC_CRT_HWC_COLOR_1_2 (0x238) +#define SM501_DC_CRT_HWC_COLOR_3 (0x23C) -#define SM501_DC_PANEL_PALETTE (0x400) +#define SM501_DC_PANEL_PALETTE (0x400) -#define SM501_DC_VIDEO_PALETTE (0x800) +#define SM501_DC_VIDEO_PALETTE (0x800) -#define SM501_DC_CRT_PALETTE (0xC00) +#define SM501_DC_CRT_PALETTE (0xC00)/* Zoom Video port base */ -#define SM501_ZVPORT (0x090000) +#define SM501_ZVPORT (0x090000)/* AC97/I2S base */ -#define SM501_AC97 (0x0A0000) +#define SM501_AC97 (0x0A0000)/* 8051 micro controller base */ -#define SM501_UCONTROLLER (0x0B0000) +#define SM501_UCONTROLLER (0x0B0000)/* 8051 micro controller SRAM base */ -#define SM501_UCONTROLLER_SRAM (0x0C0000) +#define SM501_UCONTROLLER_SRAM (0x0C0000)/* DMA base */ -#define SM501_DMA (0x0D0000) +#define SM501_DMA (0x0D0000)/* 2d engine base */ -#define SM501_2D_ENGINE (0x100000) -#define SM501_2D_SOURCE (0x00) -#define SM501_2D_DESTINATION (0x04) -#define SM501_2D_DIMENSION (0x08) -#define SM501_2D_CONTROL (0x0C) -#define SM501_2D_PITCH (0x10) -#define SM501_2D_FOREGROUND (0x14) -#define SM501_2D_BACKGROUND (0x18) -#define SM501_2D_STRETCH (0x1C) -#define SM501_2D_COLOR_COMPARE (0x20) -#define SM501_2D_COLOR_COMPARE_MASK (0x24) -#define SM501_2D_MASK (0x28) -#define SM501_2D_CLIP_TL (0x2C) -#define SM501_2D_CLIP_BR (0x30) -#define SM501_2D_MONO_PATTERN_LOW (0x34) -#define SM501_2D_MONO_PATTERN_HIGH (0x38) -#define SM501_2D_WINDOW_WIDTH (0x3C) -#define SM501_2D_SOURCE_BASE (0x40) -#define SM501_2D_DESTINATION_BASE (0x44) -#define SM501_2D_ALPHA (0x48) -#define SM501_2D_WRAP (0x4C) -#define SM501_2D_STATUS (0x50) +#define SM501_2D_ENGINE (0x100000) +#define SM501_2D_SOURCE (0x00) +#define SM501_2D_DESTINATION (0x04) +#define SM501_2D_DIMENSION (0x08) +#define SM501_2D_CONTROL (0x0C) +#define SM501_2D_PITCH (0x10) +#define SM501_2D_FOREGROUND (0x14) +#define SM501_2D_BACKGROUND (0x18) +#define SM501_2D_STRETCH (0x1C) +#define SM501_2D_COLOR_COMPARE (0x20) +#define SM501_2D_COLOR_COMPARE_MASK (0x24) +#define SM501_2D_MASK (0x28) +#define SM501_2D_CLIP_TL (0x2C) +#define SM501_2D_CLIP_BR (0x30) +#define SM501_2D_MONO_PATTERN_LOW (0x34) +#define SM501_2D_MONO_PATTERN_HIGH (0x38) +#define SM501_2D_WINDOW_WIDTH (0x3C) +#define SM501_2D_SOURCE_BASE (0x40) +#define SM501_2D_DESTINATION_BASE (0x44) +#define SM501_2D_ALPHA (0x48) +#define SM501_2D_WRAP (0x4C) +#define SM501_2D_STATUS (0x50) -#define SM501_CSC_Y_SOURCE_BASE (0xC8) -#define SM501_CSC_CONSTANTS (0xCC) -#define SM501_CSC_Y_SOURCE_X (0xD0) -#define SM501_CSC_Y_SOURCE_Y (0xD4) -#define SM501_CSC_U_SOURCE_BASE (0xD8) -#define SM501_CSC_V_SOURCE_BASE (0xDC) -#define SM501_CSC_SOURCE_DIMENSION (0xE0) -#define SM501_CSC_SOURCE_PITCH (0xE4) -#define SM501_CSC_DESTINATION (0xE8) -#define SM501_CSC_DESTINATION_DIMENSION (0xEC) -#define SM501_CSC_DESTINATION_PITCH (0xF0) -#define SM501_CSC_SCALE_FACTOR (0xF4) -#define SM501_CSC_DESTINATION_BASE (0xF8) -#define SM501_CSC_CONTROL (0xFC) +#define SM501_CSC_Y_SOURCE_BASE (0xC8) +#define SM501_CSC_CONSTANTS (0xCC) +#define SM501_CSC_Y_SOURCE_X (0xD0) +#define SM501_CSC_Y_SOURCE_Y (0xD4) +#define SM501_CSC_U_SOURCE_BASE (0xD8) +#define SM501_CSC_V_SOURCE_BASE (0xDC) +#define SM501_CSC_SOURCE_DIMENSION (0xE0) +#define SM501_CSC_SOURCE_PITCH (0xE4) +#define SM501_CSC_DESTINATION (0xE8) +#define SM501_CSC_DESTINATION_DIMENSION (0xEC) +#define SM501_CSC_DESTINATION_PITCH (0xF0) +#define SM501_CSC_SCALE_FACTOR (0xF4) +#define SM501_CSC_DESTINATION_BASE (0xF8) +#define SM501_CSC_CONTROL (0xFC)/* 2d engine data port base */ -#define SM501_2D_ENGINE_DATA (0x110000) +#define SM501_2D_ENGINE_DATA (0x110000)/* end of register definitions */ /* SM501 local memory size taken from "linux/drivers/mfd/sm501.c" */ static const uint32_t sm501_mem_local_size[] = { - [0 ] =4 *1024 *1024 , - [1 ] =8 *1024 *1024 , - [2 ] =16 *1024 *1024 , - [3 ] =32 *1024 *1024 , - [4 ] =64 *1024 *1024 , - [5 ] =2 *1024 *1024 , + [0 ] =4 *1024 *1024 , + [1 ] =8 *1024 *1024 , + [2 ] =16 *1024 *1024 , + [3 ] =32 *1024 *1024 , + [4 ] =64 *1024 *1024 , + [5 ] =2 *1024 *1024 , };#define get_local_mem_size (s) sm501_mem_local_size[(s)->local_mem_size_index]
@@ -515,13 +515,13 @@int i, index =0 ;for (i =0 ; i <ARRAY_SIZE (sm501_mem_local_size); i++) { -uint32_t new_size = sm501_mem_local_size[i]; -if (new_size >= size) { -if (norm_size ==0 || norm_size > new_size) { - norm_size = new_size; - index = i; - } - } +uint32_t new_size = sm501_mem_local_size[i]; +if (new_size >= size) { +if (norm_size ==0 || norm_size > new_size) { + norm_size = new_size; + index = i; + } + } }return index;
@@ -535,95 +535,95 @@switch (addr) {case SM501_SYSTEM_CONTROL : - ret = s->system_control; -break ; + ret = s->system_control; +break ;case SM501_MISC_CONTROL : - ret = s->misc_control; -break ; + ret = s->misc_control; +break ;case SM501_GPIO31_0_CONTROL : - ret = s->gpio_31_0_control; -break ; + ret = s->gpio_31_0_control; +break ;case SM501_GPIO63_32_CONTROL : - ret = s->gpio_63_32_control; -break ; + ret = s->gpio_63_32_control; +break ;case SM501_DEVICEID : - ret =0x050100A0 ; -break ; + ret =0x050100A0 ; +break ;case SM501_DRAM_CONTROL : - ret = (s->dram_control &0x07F107C0 ) | s->local_mem_size_index <<13 ; -break ; + ret = (s->dram_control &0x07F107C0 ) | s->local_mem_size_index <<13 ; +break ;case SM501_IRQ_MASK : - ret = s->irq_mask; -break ; + ret = s->irq_mask; +break ;case SM501_MISC_TIMING : -/* TODO : simulate gate control */ - ret = s->misc_timing; -break ; +/* TODO : simulate gate control */ + ret = s->misc_timing; +break ;case SM501_CURRENT_GATE : -/* TODO : simulate gate control */ - ret =0x00021807 ; -break ; +/* TODO : simulate gate control */ + ret =0x00021807 ; +break ;case SM501_CURRENT_CLOCK : - ret =0x2A1A0A09 ; -break ; + ret =0x2A1A0A09 ; +break ;case SM501_POWER_MODE_CONTROL : - ret = s->power_mode_control; -break ; + ret = s->power_mode_control; +break ;default : -printf ("sm501 system config : not implemented register read." -" addr=%x\n" , (int )addr); -assert (0 ); +printf ("sm501 system config : not implemented register read." +" addr=%x\n" , (int )addr); +assert (0 ); }return ret; }static void sm501_system_config_write (void *opaque, -target_phys_addr_t addr,uint32_t value) +target_phys_addr_t addr,uint32_t value) {SM501State * s = (SM501State *)opaque;SM501_DPRINTF ("sm501 system config regs : write addr=%x, val=%x\n" , - addr, value); + addr, value);switch (addr) {case SM501_SYSTEM_CONTROL : - s->system_control = value &0xE300B8F7 ; -break ; + s->system_control = value &0xE300B8F7 ; +break ;case SM501_MISC_CONTROL : - s->misc_control = value &0xFF7FFF20 ; -break ; + s->misc_control = value &0xFF7FFF20 ; +break ;case SM501_GPIO31_0_CONTROL : - s->gpio_31_0_control = value; -break ; + s->gpio_31_0_control = value; +break ;case SM501_GPIO63_32_CONTROL : - s->gpio_63_32_control = value; -break ; + s->gpio_63_32_control = value; +break ;case SM501_DRAM_CONTROL : - s->local_mem_size_index = (value >>13 ) &0x7 ; -/* rODO : check validity of size change */ - s->dram_control |= value &0x7FFFFFC3 ; -break ; + s->local_mem_size_index = (value >>13 ) &0x7 ; +/* rODO : check validity of size change */ + s->dram_control |= value &0x7FFFFFC3 ; +break ;case SM501_IRQ_MASK : - s->irq_mask = value; -break ; + s->irq_mask = value; +break ;case SM501_MISC_TIMING : - s->misc_timing = value &0xF31F1FFF ; -break ; + s->misc_timing = value &0xF31F1FFF ; +break ;case SM501_POWER_MODE_0_GATE :case SM501_POWER_MODE_1_GATE :case SM501_POWER_MODE_0_CLOCK :case SM501_POWER_MODE_1_CLOCK : -/* TODO : simulate gate & clock control */ -break ; +/* TODO : simulate gate & clock control */ +break ;case SM501_POWER_MODE_CONTROL : - s->power_mode_control = value &0x00000003 ; -break ; + s->power_mode_control = value &0x00000003 ; +break ;default : -printf ("sm501 system config : not implemented register write." -" addr=%x, val=%x\n" , (int )addr, value); -assert (0 ); +printf ("sm501 system config : not implemented register write." +" addr=%x, val=%x\n" , (int )addr, value); +assert (0 ); } }
@@ -652,11 +652,11 @@ }static void sm501_palette_write (void *opaque, -target_phys_addr_t addr,uint32_t value) +target_phys_addr_t addr,uint32_t value) {SM501State * s = (SM501State *)opaque;SM501_DPRINTF ("sm501 palette write addr=%x, val=%x\n" , - (int )addr, value); + (int )addr, value);/* TODO : consider BYTE/WORD access */ /* TODO : consider endian */
@@ -674,194 +674,194 @@switch (addr) {case SM501_DC_PANEL_CONTROL : - ret = s->dc_panel_control; -break ; + ret = s->dc_panel_control; +break ;case SM501_DC_PANEL_PANNING_CONTROL : - ret = s->dc_panel_panning_control; -break ; + ret = s->dc_panel_panning_control; +break ;case SM501_DC_PANEL_FB_ADDR : - ret = s->dc_panel_fb_addr; -break ; + ret = s->dc_panel_fb_addr; +break ;case SM501_DC_PANEL_FB_OFFSET : - ret = s->dc_panel_fb_offset; -break ; + ret = s->dc_panel_fb_offset; +break ;case SM501_DC_PANEL_FB_WIDTH : - ret = s->dc_panel_fb_width; -break ; + ret = s->dc_panel_fb_width; +break ;case SM501_DC_PANEL_FB_HEIGHT : - ret = s->dc_panel_fb_height; -break ; + ret = s->dc_panel_fb_height; +break ;case SM501_DC_PANEL_TL_LOC : - ret = s->dc_panel_tl_location; -break ; + ret = s->dc_panel_tl_location; +break ;case SM501_DC_PANEL_BR_LOC : - ret = s->dc_panel_br_location; -break ; + ret = s->dc_panel_br_location; +break ;case SM501_DC_PANEL_H_TOT : - ret = s->dc_panel_h_total; -break ; + ret = s->dc_panel_h_total; +break ;case SM501_DC_PANEL_H_SYNC : - ret = s->dc_panel_h_sync; -break ; + ret = s->dc_panel_h_sync; +break ;case SM501_DC_PANEL_V_TOT : - ret = s->dc_panel_v_total; -break ; + ret = s->dc_panel_v_total; +break ;case SM501_DC_PANEL_V_SYNC : - ret = s->dc_panel_v_sync; -break ; + ret = s->dc_panel_v_sync; +break ;case SM501_DC_CRT_CONTROL : - ret = s->dc_crt_control; -break ; + ret = s->dc_crt_control; +break ;case SM501_DC_CRT_FB_ADDR : - ret = s->dc_crt_fb_addr; -break ; + ret = s->dc_crt_fb_addr; +break ;case SM501_DC_CRT_FB_OFFSET : - ret = s->dc_crt_fb_offset; -break ; + ret = s->dc_crt_fb_offset; +break ;case SM501_DC_CRT_H_TOT : - ret = s->dc_crt_h_total; -break ; + ret = s->dc_crt_h_total; +break ;case SM501_DC_CRT_H_SYNC : - ret = s->dc_crt_h_sync; -break ; + ret = s->dc_crt_h_sync; +break ;case SM501_DC_CRT_V_TOT : - ret = s->dc_crt_v_total; -break ; + ret = s->dc_crt_v_total; +break ;case SM501_DC_CRT_V_SYNC : - ret = s->dc_crt_v_sync; -break ; + ret = s->dc_crt_v_sync; +break ;case SM501_DC_CRT_HWC_ADDR : - ret = s->dc_crt_hwc_addr; -break ; + ret = s->dc_crt_hwc_addr; +break ;case SM501_DC_CRT_HWC_LOC : - ret = s->dc_crt_hwc_addr; -break ; + ret = s->dc_crt_hwc_addr; +break ;case SM501_DC_CRT_HWC_COLOR_1_2 : - ret = s->dc_crt_hwc_addr; -break ; + ret = s->dc_crt_hwc_addr; +break ;case SM501_DC_CRT_HWC_COLOR_3 : - ret = s->dc_crt_hwc_addr; -break ; + ret = s->dc_crt_hwc_addr; +break ; case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400*3 - 4: ret =sm501_palette_read (opaque, addr -SM501_DC_PANEL_PALETTE );break ;default : -printf ("sm501 disp ctrl : not implemented register read." -" addr=%x\n" , (int )addr); -assert (0 ); +printf ("sm501 disp ctrl : not implemented register read." +" addr=%x\n" , (int )addr); +assert (0 ); }return ret; }static void sm501_disp_ctrl_write (void *opaque, -target_phys_addr_t addr, -uint32_t value) +target_phys_addr_t addr, +uint32_t value) {SM501State * s = (SM501State *)opaque;SM501_DPRINTF ("sm501 disp ctrl regs : write addr=%x, val=%x\n" , - addr, value); + addr, value);switch (addr) {case SM501_DC_PANEL_CONTROL : - s->dc_panel_control = value &0x0FFF73FF ; -break ; + s->dc_panel_control = value &0x0FFF73FF ; +break ;case SM501_DC_PANEL_PANNING_CONTROL : - s->dc_panel_panning_control = value &0xFF3FFF3F ; -break ; + s->dc_panel_panning_control = value &0xFF3FFF3F ; +break ;case SM501_DC_PANEL_FB_ADDR : - s->dc_panel_fb_addr = value &0x8FFFFFF0 ; -break ; + s->dc_panel_fb_addr = value &0x8FFFFFF0 ; +break ;case SM501_DC_PANEL_FB_OFFSET : - s->dc_panel_fb_offset = value &0x3FF03FF0 ; -break ; + s->dc_panel_fb_offset = value &0x3FF03FF0 ; +break ;case SM501_DC_PANEL_FB_WIDTH : - s->dc_panel_fb_width = value &0x0FFF0FFF ; -break ; + s->dc_panel_fb_width = value &0x0FFF0FFF ; +break ;case SM501_DC_PANEL_FB_HEIGHT : - s->dc_panel_fb_height = value &0x0FFF0FFF ; -break ; + s->dc_panel_fb_height = value &0x0FFF0FFF ; +break ;case SM501_DC_PANEL_TL_LOC : - s->dc_panel_tl_location = value &0x07FF07FF ; -break ; + s->dc_panel_tl_location = value &0x07FF07FF ; +break ;case SM501_DC_PANEL_BR_LOC : - s->dc_panel_br_location = value &0x07FF07FF ; -break ; + s->dc_panel_br_location = value &0x07FF07FF ; +break ;case SM501_DC_PANEL_H_TOT : - s->dc_panel_h_total = value &0x0FFF0FFF ; -break ; + s->dc_panel_h_total = value &0x0FFF0FFF ; +break ;case SM501_DC_PANEL_H_SYNC : - s->dc_panel_h_sync = value &0x00FF0FFF ; -break ; + s->dc_panel_h_sync = value &0x00FF0FFF ; +break ;case SM501_DC_PANEL_V_TOT : - s->dc_panel_v_total = value &0x0FFF0FFF ; -break ; + s->dc_panel_v_total = value &0x0FFF0FFF ; +break ;case SM501_DC_PANEL_V_SYNC : - s->dc_panel_v_sync = value &0x003F0FFF ; -break ; + s->dc_panel_v_sync = value &0x003F0FFF ; +break ;case SM501_DC_PANEL_HWC_ADDR : - s->dc_panel_hwc_addr = value &0x8FFFFFF0 ; -break ; + s->dc_panel_hwc_addr = value &0x8FFFFFF0 ; +break ;case SM501_DC_PANEL_HWC_LOC : - s->dc_panel_hwc_addr = value &0x0FFF0FFF ; -break ; + s->dc_panel_hwc_addr = value &0x0FFF0FFF ; +break ;case SM501_DC_PANEL_HWC_COLOR_1_2 : - s->dc_panel_hwc_addr = value; -break ; + s->dc_panel_hwc_addr = value; +break ;case SM501_DC_PANEL_HWC_COLOR_3 : - s->dc_panel_hwc_addr = value &0x0000FFFF ; -break ; + s->dc_panel_hwc_addr = value &0x0000FFFF ; +break ;case SM501_DC_CRT_CONTROL : - s->dc_crt_control = value &0x0003FFFF ; -break ; + s->dc_crt_control = value &0x0003FFFF ; +break ;case SM501_DC_CRT_FB_ADDR : - s->dc_crt_fb_addr = value &0x8FFFFFF0 ; -break ; + s->dc_crt_fb_addr = value &0x8FFFFFF0 ; +break ;case SM501_DC_CRT_FB_OFFSET : - s->dc_crt_fb_offset = value &0x3FF03FF0 ; -break ; + s->dc_crt_fb_offset = value &0x3FF03FF0 ; +break ;case SM501_DC_CRT_H_TOT : - s->dc_crt_h_total = value &0x0FFF0FFF ; -break ; + s->dc_crt_h_total = value &0x0FFF0FFF ; +break ;case SM501_DC_CRT_H_SYNC : - s->dc_crt_h_sync = value &0x00FF0FFF ; -break ; + s->dc_crt_h_sync = value &0x00FF0FFF ; +break ;case SM501_DC_CRT_V_TOT : - s->dc_crt_v_total = value &0x0FFF0FFF ; -break ; + s->dc_crt_v_total = value &0x0FFF0FFF ; +break ;case SM501_DC_CRT_V_SYNC : - s->dc_crt_v_sync = value &0x003F0FFF ; -break ; + s->dc_crt_v_sync = value &0x003F0FFF ; +break ;case SM501_DC_CRT_HWC_ADDR : - s->dc_crt_hwc_addr = value &0x8FFFFFF0 ; -break ; + s->dc_crt_hwc_addr = value &0x8FFFFFF0 ; +break ;case SM501_DC_CRT_HWC_LOC : - s->dc_crt_hwc_addr = value &0x0FFF0FFF ; -break ; + s->dc_crt_hwc_addr = value &0x0FFF0FFF ; +break ;case SM501_DC_CRT_HWC_COLOR_1_2 : - s->dc_crt_hwc_addr = value; -break ; + s->dc_crt_hwc_addr = value; +break ;case SM501_DC_CRT_HWC_COLOR_3 : - s->dc_crt_hwc_addr = value &0x0000FFFF ; -break ; + s->dc_crt_hwc_addr = value &0x0000FFFF ; +break ; case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400*3 - 4:sm501_palette_write (opaque, addr -SM501_DC_PANEL_PALETTE , value);break ;default : -printf ("sm501 disp ctrl : not implemented register write." -" addr=%x, val=%x\n" , (int )addr, value); -assert (0 ); +printf ("sm501 disp ctrl : not implemented register write." +" addr=%x, val=%x\n" , (int )addr, value); +assert (0 ); } }
@@ -882,7 +882,7 @@#include "pixel_ops.h" typedef void draw_line_func (uint8_t *d,const uint8_t *s, -int width,const uint32_t *pal); +int width,const uint32_t *pal);#define DEPTH 8#include "sm501_template.h"
@@ -943,16 +943,16 @@switch (ds_get_bits_per_pixel (s)) {default :case 8 : -return 0 ; +return 0 ;case 15 :return 1 ;case 16 :return 2 ;case 32 : -if (is_surface_bgr (s->surface)) -return 4 ; -else -return 3 ; +if (is_surface_bgr (s->surface)) +return 4 ; +else +return 3 ; } }
@@ -966,7 +966,7 @@int src_bpp =0 ;int dst_bpp =ds_get_bytes_per_pixel (s->ds) + (ds_get_bits_per_pixel (s->ds) %8 ?1 :0 );uint32_t * palette = (uint32_t *)&s->dc_palette[SM501_DC_CRT_PALETTE - -SM501_DC_PANEL_PALETTE ]; + -SM501_DC_PANEL_PALETTE ];int ds_depth_index =get_depth_index (s->ds);draw_line_func * draw_line =NULL ;int full_update =0 ;
@@ -978,73 +978,73 @@/* choose draw_line function */ switch (s->dc_crt_control &3 ) {case SM501_DC_CRT_CONTROL_8BPP : - src_bpp =1 ; - draw_line = draw_line8_funcs[ds_depth_index]; -break ; + src_bpp =1 ; + draw_line = draw_line8_funcs[ds_depth_index]; +break ;case SM501_DC_CRT_CONTROL_16BPP : - src_bpp =2 ; - draw_line = draw_line16_funcs[ds_depth_index]; -break ; + src_bpp =2 ; + draw_line = draw_line16_funcs[ds_depth_index]; +break ;case SM501_DC_CRT_CONTROL_32BPP : - src_bpp =4 ; - draw_line = draw_line32_funcs[ds_depth_index]; -break ; + src_bpp =4 ; + draw_line = draw_line32_funcs[ds_depth_index]; +break ;default : -printf ("sm501 draw crt : invalid DC_CRT_CONTROL=%x.\n" , - s->dc_crt_control); -assert (0 ); -break ; +printf ("sm501 draw crt : invalid DC_CRT_CONTROL=%x.\n" , + s->dc_crt_control); +assert (0 ); +break ; }/* adjust console size */ if (s->last_width != width || s->last_height != height) { -qemu_console_resize (s->ds, width, height); - s->last_width = width; - s->last_height = height; - full_update =1 ; +qemu_console_resize (s->ds, width, height); + s->last_width = width; + s->last_height = height; + full_update =1 ; }/* draw each line according to conditions */ for (y =0 ; y < height; y++) { -int update = full_update; -ram_addr_t page0 = offset &TARGET_PAGE_MASK ; -ram_addr_t page1 = (offset + width * src_bpp -1 ) &TARGET_PAGE_MASK ; -ram_addr_t page; +int update = full_update; +ram_addr_t page0 = offset &TARGET_PAGE_MASK ; +ram_addr_t page1 = (offset + width * src_bpp -1 ) &TARGET_PAGE_MASK ; +ram_addr_t page; -/* check dirty flags for each line */ -for (page = page0; page <= page1; page +=TARGET_PAGE_SIZE ) -if (cpu_physical_memory_get_dirty (page,VGA_DIRTY_FLAG )) - update =1 ; +/* check dirty flags for each line */ +for (page = page0; page <= page1; page +=TARGET_PAGE_SIZE ) +if (cpu_physical_memory_get_dirty (page,VGA_DIRTY_FLAG )) + update =1 ; -/* draw line and change status */ -if (update) { -draw_line (&(ds_get_data (s->ds)[y * width * dst_bpp]), src, width, palette); -if (y_start <0 ) - y_start = y; -if (page0 < page_min) - page_min = page0; -if (page1 > page_max) - page_max = page1; - }else { -if (y_start >=0 ) { -/* flush to display */ -dpy_update (s->ds,0 , y_start, width, y - y_start); - y_start =-1 ; - } - } +/* draw line and change status */ +if (update) { +draw_line (&(ds_get_data (s->ds)[y * width * dst_bpp]), src, width, palette); +if (y_start <0 ) + y_start = y; +if (page0 < page_min) + page_min = page0; +if (page1 > page_max) + page_max = page1; + }else { +if (y_start >=0 ) { +/* flush to display */ +dpy_update (s->ds,0 , y_start, width, y - y_start); + y_start =-1 ; + } + } - src += width * src_bpp; - offset += width * src_bpp; + src += width * src_bpp; + offset += width * src_bpp; }/* complete flush to display */ if (y_start >=0 ) -dpy_update (s->ds,0 , y_start, width, y - y_start); +dpy_update (s->ds,0 , y_start, width, y - y_start);/* clear dirty flags */ if (page_max !=-1 ) -cpu_physical_memory_reset_dirty (page_min, page_max +TARGET_PAGE_SIZE , -VGA_DIRTY_FLAG ); +cpu_physical_memory_reset_dirty (page_min, page_max +TARGET_PAGE_SIZE , +VGA_DIRTY_FLAG ); }static void sm501_update_display (void *opaque)
@@ -1052,7 +1052,7 @@SM501State * s = (SM501State *)opaque;if (s->dc_crt_control &SM501_DC_CRT_CONTROL_ENABLE ) -sm501_draw_crt (s); +sm501_draw_crt (s); } void sm501_init(uint32_t base, uint32_t local_mem_bytes, qemu_irq irq,
@@ -1066,9 +1066,9 @@ s = (SM501State *)qemu_mallocz (sizeof (SM501State)); s->base = base; s->local_mem_size_index - =get_local_mem_size_index (local_mem_bytes); + =get_local_mem_size_index (local_mem_bytes);SM501_DPRINTF ("local mem size=%x. index=%d\n" ,get_local_mem_size (s), - s->local_mem_size_index); + s->local_mem_size_index); s->system_control =0x00100000 ; s->misc_control =0x00001000 ;/* assumes SH, active=low */ s->dc_panel_control =0x00010000 ;
@@ -1081,12 +1081,12 @@/* map mmio */ sm501_system_config_index - =cpu_register_io_memory (0 , sm501_system_config_readfn, - sm501_system_config_writefn, s); + =cpu_register_io_memory (0 , sm501_system_config_readfn, + sm501_system_config_writefn, s);cpu_register_physical_memory (base +MMIO_BASE_OFFSET , -0x6c , sm501_system_config_index); +0x6c , sm501_system_config_index); sm501_disp_ctrl_index =cpu_register_io_memory (0 , sm501_disp_ctrl_readfn, - sm501_disp_ctrl_writefn, s); + sm501_disp_ctrl_writefn, s);cpu_register_physical_memory (base +MMIO_BASE_OFFSET +SM501_DC ,0x1000 , sm501_disp_ctrl_index);
@@ -1096,11 +1096,11 @@/* bridge to serial emulation module */ if (chr) -serial_mm_init (base +MMIO_BASE_OFFSET +SM501_UART0 ,2 , -0 ,/* TODO : chain irq to IRL */ -115200 , chr,1 ); +serial_mm_init (base +MMIO_BASE_OFFSET +SM501_UART0 ,2 , +0 ,/* TODO : chain irq to IRL */ +115200 , chr,1 );/* create qemu graphic console */ s->ds =graphic_console_init (sm501_update_display,NULL , -NULL ,NULL , s); +NULL ,NULL , s); }
hw/sm501_template.h +20 -20
@@ -47,40 +47,40 @@ {uint8_t v, r, g, b;do { - v =ldub_raw (s); - r = (pal[v] >>16 ) &0xff ; - g = (pal[v] >>8 ) &0xff ; - b = (pal[v] >>0 ) &0xff ; - ((PIXEL_TYPE *) d)[0 ] =glue (rgb_to_pixel,PIXEL_NAME )(r, g, b); - s ++; - d +=BPP ; + v =ldub_raw (s); + r = (pal[v] >>16 ) &0xff ; + g = (pal[v] >>8 ) &0xff ; + b = (pal[v] >>0 ) &0xff ; + ((PIXEL_TYPE *) d)[0 ] =glue (rgb_to_pixel,PIXEL_NAME )(r, g, b); + s ++; + d +=BPP ; }while (-- width !=0 ); }static void glue (draw_line16_ ,PIXEL_NAME )( -uint8_t *d,const uint8_t *s,int width,const uint32_t *pal) +uint8_t *d,const uint8_t *s,int width,const uint32_t *pal) {uint16_t rgb565;uint8_t r, g, b;do { - rgb565 =lduw_raw (s); - r = ((rgb565 >>11 ) &0x1f ) <<3 ; - g = ((rgb565 >>5 ) &0x3f ) <<2 ; - b = ((rgb565 >>0 ) &0x1f ) <<3 ; - ((PIXEL_TYPE *) d)[0 ] =glue (rgb_to_pixel,PIXEL_NAME )(r, g, b); - s +=2 ; - d +=BPP ; + rgb565 =lduw_raw (s); + r = ((rgb565 >>11 ) &0x1f ) <<3 ; + g = ((rgb565 >>5 ) &0x3f ) <<2 ; + b = ((rgb565 >>0 ) &0x1f ) <<3 ; + ((PIXEL_TYPE *) d)[0 ] =glue (rgb_to_pixel,PIXEL_NAME )(r, g, b); + s +=2 ; + d +=BPP ; }while (-- width !=0 ); }static void glue (draw_line32_ ,PIXEL_NAME )( -uint8_t *d,const uint8_t *s,int width,const uint32_t *pal) +uint8_t *d,const uint8_t *s,int width,const uint32_t *pal) {uint8_t r, g, b; do { - ldub_raw(s); + ldub_raw(s); #if defined(TARGET_WORDS_BIGENDIAN) r = s[1]; g = s[2];
@@ -90,9 +90,9 @@ g = s[1 ]; r = s[2 ];#endif - ((PIXEL_TYPE *) d)[0 ] =glue (rgb_to_pixel,PIXEL_NAME )(r, g, b); - s +=4 ; - d +=BPP ; + ((PIXEL_TYPE *) d)[0 ] =glue (rgb_to_pixel,PIXEL_NAME )(r, g, b); + s +=4 ; + d +=BPP ; }while (-- width !=0 ); }
Quoted 3 lines · Shin-ichiro KAWASAKI
This patch simply removes TABs from '
sm501.c' and 'sm501_template.h', to be more consistent withCODING_STYLE.
I think tab are mor consistent
specially when we use git now ortherwise it will complain about whitespace
Best Regards,
J.