MIPS: Implement ethernet halt for au1x00
PATCH 1/1 MIPS: Implement ethernet halt for au1x00
Implement ethernet halt() by putting MAC0 in reset. If we do not do this, we will get memory corruption when ethernet frames are received during early OS boot.
Signed-off-by Thomas Lange <[email protected]>
--- cpu/mips/au1x00_eth.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
cpu/mips/au1x00_eth.c +4 -0
@@ -276,6 +276,10 @@ static int au1x00_init(struct eth_device* dev, bd_t * bd){ }static void au1x00_halt (struct eth_device * dev){ +volatile u32 *macen = (volatile u32 *)MAC0_ENABLE ; + +/* Put MAC0 in reset */ + *macen =0 ; }int au1x00_enet_initialize (bd_t *bis){
Signature · 1 line
1.5.6.5
PATCH 1/1 MIPS: Implement ethernet halt for au1x00
Quoted 14 lines · Thomas Lange
Implement ethernet
halt()by putting MAC0 in reset. If we do not do this, we will get memory corruption when ethernet frames are received during early OS boot.Signed-off-by Thomas Lange <[email protected]>--- cpu/mips/au1x00_eth.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)cpu/mips/au1x00_eth.c +0
-0
cpu/mips/au1x00_eth.c static int au1x00_init(struct eth_device* dev, bd_t * bd){ · line 285
Quoted 10 lines
cpu/mips/au1x00_eth.c +4
-0@@ -276,6 +276,10 @@ static int au1x00_init(struct eth_device* dev, bd_t * bd){ }static void au1x00_halt (struct eth_device * dev){ +volatile u32 *macen = (volatile u32 *)MAC0_ENABLE ; + +/* Put MAC0 in reset */ + *macen =0 ; }int au1x00_enet_initialize (bd_t *bis){
Wolfgang-san,
could you please pick up this patch directly? Thanks,
Shinya