pxa2xx-i2s: Proper initialization
Subsystems (3)
PATCH RESEND 1/4 pxa2xx-i2s: Proper initialization
Reset FIFO logic and registers, and make sure REC and RPL functions along with FIFO service are disabled at probe.
Signed-off-by Karl Beldan <[email protected]>
--- sound/soc/pxa/pxa2xx-i2s.c | 13 +++++++++++++ 1 files changed, 13 insertions(+), 0 deletions(-)
sound/soc/pxa/pxa2xx-i2s.c +13 -0
@@ -346,6 +346,19 @@ static int pxa2xx_i2s_probe(struct platform_device *dev)if (ret !=0 )clk_put (clk_i2s); +/* +* PXA Developer's Manual: +* If SACR0[ENB] is toggled in the middle of a normal operation, +* the SACR0[RST] bit must also be set and cleared to reset all +* I2S controller registers. +*/ +SACR0 =SACR0_RST ; +SACR0 =0 ; +/* Make sure RPL and REC are disabled */ +SACR1 =SACR1_DRPL |SACR1_DREC ; +/* Along with FIFO servicing */ +SAIMR &= ~(SAIMR_RFS |SAIMR_TFS ); +return ret; }
Signature · 4 lines
1.6.3.rc1.34.g0be9b -- Karl Beldan
Mark Brown
AppliedQuoted 4 lines · Karl Beldan
Reset FIFO logic and registers, and make sure REC and RPL functions along with FIFO service are disabled at probe.
Signed-off-by Karl Beldan <[email protected]>
Applied, thanks.