Skip to contentSkip to conversation

tmp401: Add support for TI's TMP411

RFC PATCH Superseded Andre Prendel 3 participants 3 messages May 14, 2009 – May 15, 2009

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

RFC PATCH 2/2 tmp401: Add support for TI's TMP411

This patch adds support for the TI TMP411 sensor chip to the TMP401 driver.
---
Index: linux-2.6/drivers/hwmon/tmp401.c
=================================--- linux-2.6.orig/drivers/hwmon/tmp401.c 2009-05-13 22:19:54.000000000 +0200
+++ linux-2.6/drivers/hwmon/tmp401.c 2009-05-13 23:25:03.000000000 +0200
@@ -1,6 +1,9 @@
/* tmp401.c
*
* Copyright (C) 2007,2008 Hans de Goede <[email protected]>
+ * Gabriel Konat
+ * Sander Leget
+ * Wouter Willems
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -40,8 +43,7 @@
static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };

/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(tmp401);
-
+I2C_CLIENT_INSMOD_2(tmp401, tmp411);

/*
* The TMP401 registers, note some registers have different addresses for
@@ -56,6 +58,7 @@
#define TMP401_CONSECUTIVE_ALERT 0x22
#define TMP401_MANUFACTURER_ID_REG 0xFE
#define TMP401_DEVICE_ID_REG 0xFF
+#define TMP411_N_FACTOR_REG 0x18

static const u8 TMP401_TEMP_MSB[2] = { 0x00, 0x01 };
static const u8 TMP401_TEMP_LSB[2] = { 0x15, 0x10 };
@@ -68,6 +71,11 @@
/* These are called the THERM limit / hysteresis / mask in the datasheet */
static const u8 TMP401_TEMP_CRIT_LIMIT[2] = { 0x20, 0x19 };

+static const u8 TMP411_TEMP_LOWEST_MSB[2] = { 0x30, 0x34 };
+static const u8 TMP411_TEMP_LOWEST_LSB[2] = { 0x31, 0x35 };
+static const u8 TMP411_TEMP_HIGHEST_MSB[2] = { 0x32, 0x36 };
+static const u8 TMP411_TEMP_HIGHEST_LSB[2] = { 0x33, 0x37 };
+
/* Flags */
#define TMP401_CONFIG_RANGE 0x04
#define TMP401_CONFIG_SHUTDOWN 0x40
@@ -82,6 +90,7 @@
/* Manufacturer / Device ID's */
#define TMP401_MANUFACTURER_ID 0x55
#define TMP401_DEVICE_ID 0x11
+#define TMP411_DEVICE_ID 0x12

/*
* Functions declarations
@@ -100,6 +109,7 @@

static const struct i2c_device_id tmp401_id[] = {
{ "tmp401", tmp401 },
+ { "tmp411", tmp411 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tmp401_id);
@@ -125,6 +135,7 @@
struct mutex update_lock;
char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */
+ int kind;

/* register values */
u8 status;
@@ -134,6 +145,8 @@
u16 temp_high[2];
u8 temp_crit[2];
u8 temp_crit_hyst;
+ u16 temp_lowest[2];
+ u16 temp_highest[2];
};

/*
@@ -238,6 +251,28 @@
return sprintf(buf, "%d\n", temp);
}

+static ssize_t show_temp_lowest(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ tmp401_register_to_temp(data->temp_lowest[index],
+ data->config));
+}
+
+static ssize_t show_temp_highest(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ tmp401_register_to_temp(data->temp_highest[index],
+ data->config));
+}
+
static ssize_t show_status(struct device *dev,
struct device_attribute *devattr, char *buf)
{
@@ -250,8 +285,8 @@
return sprintf(buf, "0\n");
}

-static ssize_t store_temp_min(struct device *dev, struct device_attribute
- *devattr, const char *buf, size_t count)
+static ssize_t store_temp_min(struct device *dev,
+ struct device_attribute *devattr, const char *buf, size_t count)
{
int index = to_sensor_dev_attr(devattr)->index;
struct tmp401_data *data = tmp401_update_device(dev);
@@ -277,8 +312,8 @@
return count;
}

-static ssize_t store_temp_max(struct device *dev, struct device_attribute
- *devattr, const char *buf, size_t count)
+static ssize_t store_temp_max(struct device *dev,
+ struct device_attribute *devattr, const char *buf, size_t count)
{
int index = to_sensor_dev_attr(devattr)->index;
struct tmp401_data *data = tmp401_update_device(dev);
@@ -367,26 +402,40 @@
SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0), SENSOR_ATTR(temp1_crit, 0644, show_temp_crit, store_temp_crit, 0), SENSOR_ATTR(temp1_crit_hyst, 0644, show_temp_crit_hyst,
- store_temp_crit_hyst, 0),
+ store_temp_crit_hyst, 0),
SENSOR_ATTR(temp1_min_alarm, 0444, show_status, NULL,
- TMP401_STATUS_LOCAL_LOW),
+ TMP401_STATUS_LOCAL_LOW),
SENSOR_ATTR(temp1_max_alarm, 0444, show_status, NULL,
- TMP401_STATUS_LOCAL_HIGH),
+ TMP401_STATUS_LOCAL_HIGH),
SENSOR_ATTR(temp1_crit_alarm, 0444, show_status, NULL,
- TMP401_STATUS_LOCAL_CRIT),
+ TMP401_STATUS_LOCAL_CRIT),
SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1), SENSOR_ATTR(temp2_min, 0644, show_temp_min, store_temp_min, 1), SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1), SENSOR_ATTR(temp2_crit, 0644, show_temp_crit, store_temp_crit, 1), SENSOR_ATTR(temp2_crit_hyst, 0444, show_temp_crit_hyst, NULL, 1), SENSOR_ATTR(temp2_fault, 0444, show_status, NULL,
- TMP401_STATUS_REMOTE_OPEN),
+ TMP401_STATUS_REMOTE_OPEN),
SENSOR_ATTR(temp2_min_alarm, 0444, show_status, NULL,
- TMP401_STATUS_REMOTE_LOW),
+ TMP401_STATUS_REMOTE_LOW),
SENSOR_ATTR(temp2_max_alarm, 0444, show_status, NULL,
- TMP401_STATUS_REMOTE_HIGH),
+ TMP401_STATUS_REMOTE_HIGH),
SENSOR_ATTR(temp2_crit_alarm, 0444, show_status, NULL,
- TMP401_STATUS_REMOTE_CRIT),
+ TMP401_STATUS_REMOTE_CRIT),
+};
+
+/*
+ * Additional features of the TMP411 chip.
+ * The TMP411 stores the minimum and maximum
+ * temperature measured since power-on, chip-reset, or
+ * minimum and maximum register reset for both the local
+ * and remote channels.
+ */
+static struct sensor_device_attribute tmp411_attr[] = {
+ SENSOR_ATTR(temp1_highest, 0444, show_temp_highest, NULL, 0),
+ SENSOR_ATTR(temp1_lowest, 0444, show_temp_lowest, NULL, 0),
+ SENSOR_ATTR(temp2_highest, 0444, show_temp_highest, NULL, 1),
+ SENSOR_ATTR(temp2_lowest, 0444, show_temp_lowest, NULL, 1),
};

/*
@@ -432,8 +481,17 @@
return -ENODEV;

reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
- if (reg != TMP401_DEVICE_ID)
+
+ switch (reg) {
+ case TMP401_DEVICE_ID:
+ kind = tmp401;
+ break;
+ case TMP411_DEVICE_ID:
+ kind = tmp411;
+ break;
+ default:
return -ENODEV;
+ }

reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ); if (reg & 0x1b)
@@ -441,19 +499,21 @@

reg = i2c_smbus_read_byte_data(client,
TMP401_CONVERSION_RATE_READ);
+ /* Datasheet says: 0x1-0x6 */
if (reg > 15)
return -ENODEV;
}
- strlcpy(info->type, "tmp401", I2C_NAME_SIZE);
+ strlcpy(info->type, tmp401_id[kind - 1].name, I2C_NAME_SIZE);

return 0;
}

static int tmp401_probe(struct i2c_client *client,
const struct i2c_device_id *id)
-{
+{
int i, err = 0;
struct tmp401_data *data;
+ const char *names[] = { "TMP401", "TMP411" };

data = kzalloc(sizeof(struct tmp401_data), GFP_KERNEL); if (!data)
@@ -461,6 +521,7 @@

i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
+ data->kind = id->driver_data;

/* Initialize the TMP401 chip */ tmp401_init_client(client);
@@ -468,19 +529,29 @@
/* Register sysfs hooks */
for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++) {
err = device_create_file(&client->dev,
- &tmp401_attr[i].dev_attr);
+ &tmp401_attr[i].dev_attr);
if (err)
goto exit_remove;
}

+ /* Register aditional tmp411 sysfs hooks */
+ if (data->kind = tmp411) {
+ for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++) {
+ err = device_create_file(&client->dev,
+ &tmp411_attr[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+ }
+
data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev); data->hwmon_dev = NULL;
goto exit_remove;
}
-
- dev_info(&client->dev, "Detected TI TMP401 chip\n");
+ dev_info(&client->dev, "Detected TI %s chip\n",
+ names[data->kind]);

return 0;

@@ -500,43 +571,71 @@
for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++)
device_remove_file(&client->dev, &tmp401_attr[i].dev_attr);

+ if (data->kind = tmp411) {
+ for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++)
+ device_remove_file(&client->dev,
+ &tmp411_attr[i].dev_attr);
+ }
+
kfree(data);
return 0;
}

+static struct tmp401_data *tmp401_update_device_reg16(
+ struct i2c_client *client, struct tmp401_data *data)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ /*
+ * High byte must be read first immediately followed
+ * by the low byte
+ */
+ data->temp[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_MSB[i]) << 8;
+ data->temp[i] |= i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_LSB[i]);
+ data->temp_low[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_LOW_LIMIT_MSB_READ[i]) << 8;
+ data->temp_low[i] |= i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_LOW_LIMIT_LSB[i]);
+ data->temp_high[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_HIGH_LIMIT_MSB_READ[i]) << 8;
+ data->temp_high[i] |= i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_HIGH_LIMIT_LSB[i]);
+ data->temp_crit[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_CRIT_LIMIT[i]);
+
+ if(data->kind = TMP411_DEVICE_ID) {
+ data->temp_lowest[i] = i2c_smbus_read_byte_data(client,
+ TMP411_TEMP_LOWEST_MSB[i]) << 8;
+ data->temp_lowest[i] |= i2c_smbus_read_byte_data(
+ client, TMP411_TEMP_LOWEST_LSB[i]);
+
+ data->temp_highest[i] = i2c_smbus_read_byte_data(
+ client, TMP411_TEMP_HIGHEST_MSB[i]) << 8;
+ data->temp_highest[i] |= i2c_smbus_read_byte_data(
+ client, TMP411_TEMP_HIGHEST_LSB[i]);
+ }
+ }
+ return data;
+}
+
static struct tmp401_data *tmp401_update_device(struct device *dev) {
struct i2c_client *client = to_i2c_client(dev); struct tmp401_data *data = i2c_get_clientdata(client);
- int i;

mutex_lock(&data->update_lock);

if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
data->status = i2c_smbus_read_byte_data(client, TMP401_STATUS); data->config = i2c_smbus_read_byte_data(client,
- TMP401_CONFIG_READ);
- for (i = 0; i < 2; i++) {
- /* High byte must be read first immediately followed
- by the low byte */
- data->temp[i] = i2c_smbus_read_byte_data(client,
- TMP401_TEMP_MSB[i]) << 8;
- data->temp[i] |= i2c_smbus_read_byte_data(client,
- TMP401_TEMP_LSB[i]);
- data->temp_low[i] = i2c_smbus_read_byte_data(client,
- TMP401_TEMP_LOW_LIMIT_MSB_READ[i]) << 8;
- data->temp_low[i] |= i2c_smbus_read_byte_data(client,
- TMP401_TEMP_LOW_LIMIT_LSB[i]);
- data->temp_high[i] = i2c_smbus_read_byte_data(client,
- TMP401_TEMP_HIGH_LIMIT_MSB_READ[i]) << 8;
- data->temp_high[i] |= i2c_smbus_read_byte_data(client,
- TMP401_TEMP_HIGH_LIMIT_LSB[i]);
- data->temp_crit[i] = i2c_smbus_read_byte_data(client,
- TMP401_TEMP_CRIT_LIMIT[i]);
- }
+ TMP401_CONFIG_READ);
+ tmp401_update_device_reg16(client, data);

data->temp_crit_hyst = i2c_smbus_read_byte_data(client,
- TMP401_TEMP_CRIT_HYST);
+ TMP401_TEMP_CRIT_HYST);

data->last_updated = jiffies;
data->valid = 1;

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#1 lore raw

Re: [lm-sensors] [PATCH RFC 2/2] tmp401: Add support for TI's

Hi,

Review below.

Quoted 6 lines · Andre Prendel

This patch adds support for the TI TMP411 sensor chip to the TMP401 driver.
---
Index: linux-2.6/drivers/hwmon/tmp401.c
=================================> --- linux-2.6.orig/drivers/hwmon/tmp401.c 2009-05-13 22:19:54.000000000 +0200
+++ linux-2.6/drivers/hwmon/tmp401.c 2009-05-13 23:25:03.000000000 +0200

Review line 9

Quoted 9 lines
(quoted diff) +3 -0
@@ -1,6 +1,9 @@
  /* tmp401.c
   *
   * Copyright (C) 2007,2008 Hans de Goede<[email protected]>
+ * Gabriel Konat
+ * Sander Leget
+ * Wouter Willems
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License as published by

This looks a but strange, please make this something like:
* Preliminary tmp411 support by:
Gabriel Konat, Sander Leget & Wouter Willems

<snip>

Quoted 16 lines
(quoted diff) +16 -0
+static struct tmp401_data *tmp401_update_device_reg16(
+	struct i2c_client *client, struct tmp401_data *data)
+{
+	int i;
+
+	for (i = 0; i<  2; i++) {
+		/*
+		 * High byte must be read first immediately followed
+		 * by the low byte
+		 */
+		data->temp[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_MSB[i])<<  8;
+		data->temp[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LSB[i]);
+		data->temp_low[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LOW_LIMIT_MSB_READ[i])<<  8;

Review

Quoted 10 lines
(quoted diff) +10 -0
+		data->temp_low[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LOW_LIMIT_LSB[i]);
+		data->temp_high[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_HIGH_LIMIT_MSB_READ[i])<<  8;
+		data->temp_high[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_HIGH_LIMIT_LSB[i]);
+		data->temp_crit[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_CRIT_LIMIT[i]);
+
+		if(data->kind = TMP411_DEVICE_ID) {

This should be:
+ if(data->kind = tmp411) {

!!

Quoted 4 lines
(quoted diff) +4 -0
+			data->temp_lowest[i] = i2c_smbus_read_byte_data(client,
+				TMP411_TEMP_LOWEST_MSB[i])<<  8;
+			data->temp_lowest[i] |= i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_LOWEST_LSB[i]);

Review

Quoted 10 lines
(quoted diff) +10 -0
+
+			data->temp_highest[i] = i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_HIGHEST_MSB[i])<<  8;
+			data->temp_highest[i] |= i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_HIGHEST_LSB[i]);
+		}
+	}
+	return data;
+}
+

Other then that it looks good! I've tested this on both a tmp401 and tmp411 and with that one fix from above it works as it should on both.

Regards,

Hans

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#2 lore raw

Re: [lm-sensors] [PATCH RFC 2/2] tmp401: Add support for TI's

In reply to Andre Prendel
Quoted 7 lines · Hans de Goede

Review

Quoted 1 line · Andre Prendel
(quoted diff) +1 -0
+		if(data->kind = TMP411_DEVICE_ID) {

This should be:

(quoted diff) +1 -0
+		if(data->kind = tmp411) {

!!

This should actually be:

		if (data->kind = tmp411) {

Something scripts/checkpatch.pl would have warned Andre about.

Signature · 6 lines
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors