Skip to contentSkip to conversation

JMicron SATA controller not available - bisected

DISCUSSION Marc Dionne 1 participant 1 message May 27, 2009

lore
Share & tools
lore
#0 lore raw

With current git the SATA DVD writer on my system is no longer detected, and these errors show up:

pci 0000:05:00.0: BAR 2: can't allocate resource
pci 0000:05:00.0: BAR 3: can't allocate resource
ahci 0000:05:00.0: device not available because of BAR 2 [0x00-0x07] collisions

.. where 05:00.0 is this SATA controller where the DVD is plugged in:

05:00.0 SATA controller: JMicron Technologies, Inc. 20360/20363 Serial ATA Controller (rev 03)

This is an ICH10-based board that has the JMicron controller in addition to the onboard SATA. The drive works fine if plugged into one of the onboard ports, and also works fine with kernel 2.6.29 on the JMicron controller.

I bisected the problem down to this commit:
480b93b7837fb3cf0579a42f4953ac463a5b9e1e: PCI: centralize device setup code

Note that this worked with recent 2.6.30-rc kernels until I had to reset the board's CMOS, so a change in a BIOS setting was probably a trigger.

Marc