Skip to contentSkip to conversation

Loading parport_pc kills the keyboard if ACPI is enabled

BUG Ozan Çağlayan 1 participant 2 messages Jun 4, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

I was having this issue since 2.6.30_rc1 (if I remember correctly) but I didn't have time to analyze and report here until today.

If I don't give acpi=off during boot, the keyboard becomes unusable when udev starts. The connection type of the keyboard don't matter at all, I tried with a USB and a PS/2 one.

I was using the system with acpi=off, today I've booted into initramfs and loaded all the modules that seem to be loaded after a normal startup.

I inserted parport.ko and then parport_pc.ko and the keyboard is gone, here are the last lines:

# insmod newroot/lib/modules/2.6.30_rc8-120/kernel/drivers/parport.ko
# insmod newroot/lib/modules/2.6.30_rc8-120/kernel/drivers/parport_pc.ko
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-Style at 0x378, irq 7 [PCSPP, TRISTATE]
#

Thanks,
Ozan Caglayan

#1 lore raw

Ozan Çağlayan wrote On 04-06-2009 12:12:

Quoted 9 lines

Hi,

I was having this issue since 2.6.30_rc1 (if I remember correctly) but I didn't have time to analyze and report here until today.

If I don't give acpi=off during boot, the keyboard becomes unusable when udev starts. The connection type of the keyboard don't matter at all, I tried with a USB and a PS/2 one.

Note that the fact that the keyboard working when acpi=off seems to be that udev don't probe parport* stuff in that case. I inserted parport by hand and the keyboard is gone again as well:

[   30.696938] parport_pc 00:0d: reported by Plug and Play BIOS
[   30.697000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   30.780388] lp0: using parport0 (interrupt-driven).
[   30.804130] ppdev: user-space parallel port driver