Skip to contentSkip to conversation

netdev: Added KS8842 driver

PATCH Applied Richard Ršöjfors 2 participants 2 messages Jun 4, 2009 – Jun 8, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 netdev: Added KS8842 driver

This is a driver for the Micrel KS8842 ethernet switch.

The supplied code is for driving the KS8842 through the Timberdale FPGA on the Russellville board, a development board for Intel Atom CPU in the automotive area.

---

drivers/net/Kconfig +5 -0
Index: linux-2.6.30-rc7/drivers/net/Kconfig
===================================================================
@@ -1722,6 +1722,11 @@
 
 	  Please email feedback to <[email protected]>.
 
+config KS8842
+	tristate "Micrel KSZ8842"
+	help
+	  This platform driver is for Micrel KSZ8842 chip.
+
 config VIA_RHINE
 	tristate "VIA Rhine support"
 	depends on NET_PCI && PCI
drivers/net/Makefile +1 -0
Index: linux-2.6.30-rc7/drivers/net/Makefile
===================================================================
@@ -84,6 +84,7 @@
 obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o
 obj-$(CONFIG_SKFP) += skfp/
+obj-$(CONFIG_KS8842)	+= ks8842.o
 obj-$(CONFIG_VIA_RHINE) += via-rhine.o
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
drivers/net/ks8842.c +732 -0

732 lines not on this page · raw message

maintainer Applied
#1 lore raw

From: Richard Ršöjfors <[email protected]>
Date: Thu, 04 Jun 2009 15:35:55 +0200

Quoted 7 lines

This is a driver for the Micrel KS8842 ethernet switch.

The supplied code is for driving the KS8842 through the Timberdale FPGA on the Russellville board, a development board for Intel Atom CPU in the automotive area.

Applied, thanks.