Skip to contentSkip to conversation

acpi on sony vaio vgn-sz61mn

DISCUSSION Sebastian Pohl 3 participants 14 messages Jun 17, 2009 – Jun 25, 2009 ACPI

lore
Share & tools
lore

Sebastian Pohl

author
#0 lore raw

Hello everyone!

Thank you to everyone working on the sony stuff! It made my laptop a much more valuable companion!

But there are still some flaws that are left. I am writing to get an advise what to do with them. Should i post them to bugtrackter or something else?

Ok, the problems are:

- The special button s2 generates the same acpi event as the stamina switch
- The lidswitch does not generate any acpi events
- The Power does not generate any acpi events

Please tell me what i can do and how i can help solve these problems.

If i am totaly wrong here please say...

regards

sebastian

#1 lore raw
Quoted 10 lines · Sebastian Pohl

Hello everyone!

Thank you to everyone working on the sony stuff! It made my laptop a much more valuable companion!

But there are still some flaws that are left. I am writing to get an advise what to do with them.

Quoted 6 lines

Ok, the problems are:

- The special button s2 generates the same acpi event as the stamina switch
- The lidswitch does not generate any acpi events
- The Power does not generate any acpi events

please kill acpid, and run "cat /proc/acpi/event", what do you get when pressing each of the three buttons?

run "cat /proc/interrupts" both before and after pressing these buttons, does the number of ACPI or sony interrupts increase?
If ACPI interrupts increases, please run
"grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed event is fired.



Quoted 3 lines

Should i post them to bugtrackter or
something else?

please file a new bug report at
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
and attach all the request info there.
please also attach the acpidump output.

thanks,
rui

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#2 lore raw

Hi!

Quoted 13 lines · Zhang Rui
Quoted 11 lines · Sebastian Pohl

Hello everyone!

Thank you to everyone working on the sony stuff! It made my laptop a much more valuable companion!

But there are still some flaws that are left. I am writing to get an advise what to do with them.

Ok, the problems are:

Quoted 8 lines
Quoted 5 lines

- The special button s2 generates the same acpi event as the stamina switch
- The lidswitch does not generate any acpi events
- The Power does not generate any acpi events

please kill acpid, and run "cat /proc/acpi/event", what do you get when pressing each of the three buttons?

Both, the s2 Button and the stamina switch generate the following

sony/hotkey SPIC 00000001 00000021

Quoted 7 lines

run "cat /proc/interrupts" both before and after pressing these buttons, does the number of ACPI or sony interrupts increase?
If ACPI interrupts increases, please run
"grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed event is fired.

Only the stamina switch and the s2 button increase any interrupts but only sony interrupts are generated.

Quoted 5 lines



Quoted 3 lines

Should i post them to bugtrackter or something else?

Quoted 9 lines

please file a new bug report at
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
and attach all the request info there.
please also attach the acpidump output.

thanks,
rui

thank you!

regards

sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw
Quoted 23 lines · Sebastian Pohl

Hi!

Quoted 20 lines · Zhang Rui
Quoted 18 lines · Sebastian Pohl

Hello everyone!

Thank you to everyone working on the sony stuff! It made my laptop a much more valuable companion!

But there are still some flaws that are left. I am writing to get an advise what to do with them.

Ok, the problems are:

- The special button s2 generates the same acpi event as the stamina switch
- The lidswitch does not generate any acpi events
- The Power does not generate any acpi events

Quoted 5 lines
Quoted 3 lines

please kill acpid, and run "cat /proc/acpi/event", what do you get when pressing each of the three buttons?

Both, the s2 Button and the stamina switch generate the following

so Q1 and Q2 are sony platform driver problems.
what do you get when pressing the power button?

thanks,
rui

Quoted 26 lines

sony/hotkey SPIC 00000001 00000021

Quoted 7 lines

run "cat /proc/interrupts" both before and after pressing these buttons, does the number of ACPI or sony interrupts increase?
If ACPI interrupts increases, please run
"grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed event is fired.

Only the stamina switch and the s2 button increase any interrupts but only sony interrupts are generated.

Quoted 6 lines



Quoted 4 lines

Should i post them to bugtrackter or
something else?

Quoted 9 lines

please file a new bug report at
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
and attach all the request info there.
please also attach the acpidump output.

thanks,
rui

Quoted 5 lines

thank you!

regards

sebastian

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#4 lore raw
Quoted 30 lines · Zhang Rui
Quoted 28 lines · Sebastian Pohl

Hi!

Quoted 24 lines · Zhang Rui
Quoted 9 lines · Sebastian Pohl

Hello everyone!

Thank you to everyone working on the sony stuff! It made my laptop a much more valuable companion!

But there are still some flaws that are left. I am writing to get an advise what to do with them.

Quoted 8 lines

Ok, the problems are:

- The special button s2 generates the same acpi event as the stamina switch
- The lidswitch does not generate any acpi events
- The Power does not generate any acpi events

please kill acpid, and run "cat /proc/acpi/event", what do you get when pressing each of the three buttons?

Quoted 9 lines
Quoted 3 lines

Both, the s2 Button and the stamina switch generate the following

so Q1 and Q2 are sony platform driver problems.
what do you get when pressing the power button?

thanks,
rui

When presing the power button nothing happens. No acpi output, no interrupts, nothing. Same with the lid-switch.

regards

sebastian

Quoted 29 lines
Quoted 29 lines

sony/hotkey SPIC 00000001 00000021

Quoted 8 lines

run "cat /proc/interrupts" both before and after pressing these buttons, does the number of ACPI or sony interrupts increase?
If ACPI interrupts increases, please run
"grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed event is fired.

Only the stamina switch and the s2 button increase any interrupts but only sony interrupts are generated.

Quoted 17 lines



Quoted 4 lines

Should i post them to bugtrackter or something else?

please file a new bug report at
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
and attach all the request info there.
please also attach the acpidump output.

thanks,
rui

Quoted 8 lines
Quoted 6 lines

thank you!

regards

sebastian

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#5 lore raw
Quoted 39 lines · Sebastian Pohl
Quoted 38 lines · Zhang Rui
Quoted 26 lines · Sebastian Pohl

Hi!

Quoted 22 lines · Zhang Rui
Quoted 19 lines · Sebastian Pohl

Hello everyone!

Thank you to everyone working on the sony stuff! It made my laptop a much more valuable companion!

But there are still some flaws that are left. I am writing to get an advise what to do with them.

Ok, the problems are:

- The special button s2 generates the same acpi event as the stamina switch
- The lidswitch does not generate any acpi events
- The Power does not generate any acpi events

Quoted 7 lines
Quoted 4 lines

please kill acpid, and run "cat /proc/acpi/event", what do you get when pressing each of the three buttons?

Both, the s2 Button and the stamina switch generate the following

so Q1 and Q2 are sony platform driver problems.
what do you get when pressing the power button?

Quoted 7 lines
Quoted 3 lines

thanks,
rui

When presing the power button nothing happens. No acpi output, no interrupts, nothing. Same with the lid-switch.

even no ACPI interrupts?
please attach the output of grep . /sys/firmware/acpi/interrupts/* both before and after pressing these buttons for a couple of times.

thanks,
rui

Quoted 44 lines

regards

sebastian

Quoted 39 lines
Quoted 37 lines

sony/hotkey SPIC 00000001 00000021

Quoted 8 lines

run "cat /proc/interrupts" both before and after pressing these buttons, does the number of ACPI or sony interrupts increase?
If ACPI interrupts increases, please run
"grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed event is fired.

Only the stamina switch and the s2 button increase any interrupts but only sony interrupts are generated.

Quoted 8 lines



Quoted 5 lines

Should i post them to bugtrackter or
something else?

Quoted 10 lines

please file a new bug report at
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
and attach all the request info there.
please also attach the acpidump output.

thanks,
rui

thank you!

regards

sebastian

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#6 lore raw
Quoted 56 lines · Zhang Rui
Quoted 43 lines · Sebastian Pohl
Quoted 41 lines · Zhang Rui
Quoted 38 lines · Sebastian Pohl

Hi!

Quoted 24 lines · Zhang Rui
Quoted 11 lines · Sebastian Pohl

Hello everyone!

Thank you to everyone working on the sony stuff! It made my laptop a much more valuable companion!

But there are still some flaws that are left. I am writing to get an advise what to do with them.

Quoted 9 lines

Ok, the problems are:

- The special button s2 generates the same acpi event as the stamina switch
- The lidswitch does not generate any acpi events
- The Power does not generate any acpi events

Quoted 5 lines

please kill acpid, and run "cat /proc/acpi/event", what do you get when pressing each of the three buttons?

Both, the s2 Button and the stamina switch generate the following

Quoted 10 lines
Quoted 7 lines

so Q1 and Q2 are sony platform driver problems.
what do you get when pressing the power button?

thanks,
rui

When presing the power button nothing happens. No acpi output, no interrupts, nothing. Same with the lid-switch.

Quoted 8 lines

even no ACPI interrupts?
please attach the output of grep . /sys/firmware/acpi/interrupts/* both before and after pressing these buttons for a couple of times.

thanks,
rui

Hi,

this is before:

/sys/firmware/acpi/interrupts/error: 0
/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled

/sys/firmware/acpi/interrupts/ff_pmtimer:       0    invalid
/sys/firmware/acpi/interrupts/ff_pwr_btn:       0    invalid
/sys/firmware/acpi/interrupts/ff_rt_clk:       0    disabled
/sys/firmware/acpi/interrupts/ff_slp_btn:       0    invalid
/sys/firmware/acpi/interrupts/gpe00:       0    invalid
/sys/firmware/acpi/interrupts/gpe01:       0    enabled
/sys/firmware/acpi/interrupts/gpe02:       0    enabled
/sys/firmware/acpi/interrupts/gpe03:       0    disabled
/sys/firmware/acpi/interrupts/gpe04:       0    disabled
/sys/firmware/acpi/interrupts/gpe05:       0    disabled
/sys/firmware/acpi/interrupts/gpe06:       0    enabled
/sys/firmware/acpi/interrupts/gpe07:       0    enabled
/sys/firmware/acpi/interrupts/gpe08:       0    invalid
/sys/firmware/acpi/interrupts/gpe09:       0    disabled
/sys/firmware/acpi/interrupts/gpe0A:       0    invalid
/sys/firmware/acpi/interrupts/gpe0B:       0    enabled
/sys/firmware/acpi/interrupts/gpe0C:       0    disabled
/sys/firmware/acpi/interrupts/gpe0D:       0    disabled
/sys/firmware/acpi/interrupts/gpe0E:       0    disabled
/sys/firmware/acpi/interrupts/gpe0F:       0    invalid
/sys/firmware/acpi/interrupts/gpe10:       0    invalid
/sys/firmware/acpi/interrupts/gpe11:       0    invalid
/sys/firmware/acpi/interrupts/gpe12:       0    invalid
/sys/firmware/acpi/interrupts/gpe13:       0    invalid
/sys/firmware/acpi/interrupts/gpe14:       0    invalid
/sys/firmware/acpi/interrupts/gpe15:       0    invalid
/sys/firmware/acpi/interrupts/gpe16:       0    invalid
/sys/firmware/acpi/interrupts/gpe17:       0    enabled
/sys/firmware/acpi/interrupts/gpe18:       0    enabled
/sys/firmware/acpi/interrupts/gpe19:       0    invalid
/sys/firmware/acpi/interrupts/gpe1A:       0    invalid
/sys/firmware/acpi/interrupts/gpe1B:       0    invalid
/sys/firmware/acpi/interrupts/gpe1C:       0    invalid
/sys/firmware/acpi/interrupts/gpe1D:       0    invalid
/sys/firmware/acpi/interrupts/gpe1E:       0    invalid
/sys/firmware/acpi/interrupts/gpe1F:       0    invalid

/sys/firmware/acpi/interrupts/gpe_all: 0
/sys/firmware/acpi/interrupts/sci: 0

and after 10 times pressing the power button and opening/closing the lid:

/sys/firmware/acpi/interrupts/error: 0
/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled

/sys/firmware/acpi/interrupts/ff_pmtimer:       0    invalid
/sys/firmware/acpi/interrupts/ff_pwr_btn:       0    invalid
/sys/firmware/acpi/interrupts/ff_rt_clk:       0    disabled
/sys/firmware/acpi/interrupts/ff_slp_btn:       0    invalid
/sys/firmware/acpi/interrupts/gpe00:       0    invalid
/sys/firmware/acpi/interrupts/gpe01:       0    enabled
/sys/firmware/acpi/interrupts/gpe02:       0    enabled
/sys/firmware/acpi/interrupts/gpe03:       0    disabled
/sys/firmware/acpi/interrupts/gpe04:       0    disabled
/sys/firmware/acpi/interrupts/gpe05:       0    disabled
/sys/firmware/acpi/interrupts/gpe06:       0    enabled
/sys/firmware/acpi/interrupts/gpe07:       0    enabled
/sys/firmware/acpi/interrupts/gpe08:       0    invalid
/sys/firmware/acpi/interrupts/gpe09:       0    disabled
/sys/firmware/acpi/interrupts/gpe0A:       0    invalid
/sys/firmware/acpi/interrupts/gpe0B:       0    enabled
/sys/firmware/acpi/interrupts/gpe0C:       0    disabled
/sys/firmware/acpi/interrupts/gpe0D:       0    disabled
/sys/firmware/acpi/interrupts/gpe0E:       0    disabled
/sys/firmware/acpi/interrupts/gpe0F:       0    invalid
/sys/firmware/acpi/interrupts/gpe10:       0    invalid
/sys/firmware/acpi/interrupts/gpe11:       0    invalid
/sys/firmware/acpi/interrupts/gpe12:       0    invalid
/sys/firmware/acpi/interrupts/gpe13:       0    invalid
/sys/firmware/acpi/interrupts/gpe14:       0    invalid
/sys/firmware/acpi/interrupts/gpe15:       0    invalid
/sys/firmware/acpi/interrupts/gpe16:       0    invalid
/sys/firmware/acpi/interrupts/gpe17:       0    enabled
/sys/firmware/acpi/interrupts/gpe18:       0    enabled
/sys/firmware/acpi/interrupts/gpe19:       0    invalid
/sys/firmware/acpi/interrupts/gpe1A:       0    invalid
/sys/firmware/acpi/interrupts/gpe1B:       0    invalid
/sys/firmware/acpi/interrupts/gpe1C:       0    invalid
/sys/firmware/acpi/interrupts/gpe1D:       0    invalid
/sys/firmware/acpi/interrupts/gpe1E:       0    invalid
/sys/firmware/acpi/interrupts/gpe1F:       0    invalid

/sys/firmware/acpi/interrupts/gpe_all: 0
/sys/firmware/acpi/interrupts/sci: 0

I cant see any difference...

regards

sebastian

Quoted 50 lines
Quoted 49 lines

regards

sebastian

Quoted 44 lines
Quoted 42 lines

sony/hotkey SPIC 00000001 00000021

Quoted 9 lines

run "cat /proc/interrupts" both before and after pressing these buttons, does the number of ACPI or sony interrupts increase?
If ACPI interrupts increases, please run
"grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed event is fired.

Only the stamina switch and the s2 button increase any interrupts but only sony interrupts are generated.

Quoted 9 lines



Quoted 5 lines

Should i post them to bugtrackter or something else?

Quoted 11 lines

please file a new bug report at
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
and attach all the request info there.
please also attach the acpidump output.

thanks,
rui

thank you!

regards

sebastian

Quoted 5 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#7 lore raw
Quoted 10 lines

-----Original Message-----
From: Sebastian Pohl [mailto:[email protected]]
Sent: Tuesday, June 23, 2009 5:14 PM
To: Zhang, Rui
Cc: [email protected]; Mattia Dongili
Subject: Re: acpi on sony vaio vgn-sz61mn

Quoted 2 lines
Quoted 8 lines

Hi,

this is before:

/sys/firmware/acpi/interrupts/error: 0
/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled

/sys/firmware/acpi/interrupts/ff_pmtimer:       0    invalid
/sys/firmware/acpi/interrupts/ff_pwr_btn:       0    invalid

[Rui] power button fixed event is invalid?
Please make sure CONFIG_ACPI_BUTTON=m/y

Thanks,
rui

Quoted 143 lines

/sys/firmware/acpi/interrupts/ff_rt_clk: 0 disabled

/sys/firmware/acpi/interrupts/ff_slp_btn:       0    invalid
/sys/firmware/acpi/interrupts/gpe00:       0    invalid
/sys/firmware/acpi/interrupts/gpe01:       0    enabled
/sys/firmware/acpi/interrupts/gpe02:       0    enabled
/sys/firmware/acpi/interrupts/gpe03:       0    disabled
/sys/firmware/acpi/interrupts/gpe04:       0    disabled
/sys/firmware/acpi/interrupts/gpe05:       0    disabled
/sys/firmware/acpi/interrupts/gpe06:       0    enabled
/sys/firmware/acpi/interrupts/gpe07:       0    enabled
/sys/firmware/acpi/interrupts/gpe08:       0    invalid
/sys/firmware/acpi/interrupts/gpe09:       0    disabled
/sys/firmware/acpi/interrupts/gpe0A:       0    invalid
/sys/firmware/acpi/interrupts/gpe0B:       0    enabled
/sys/firmware/acpi/interrupts/gpe0C:       0    disabled
/sys/firmware/acpi/interrupts/gpe0D:       0    disabled
/sys/firmware/acpi/interrupts/gpe0E:       0    disabled
/sys/firmware/acpi/interrupts/gpe0F:       0    invalid
/sys/firmware/acpi/interrupts/gpe10:       0    invalid
/sys/firmware/acpi/interrupts/gpe11:       0    invalid
/sys/firmware/acpi/interrupts/gpe12:       0    invalid
/sys/firmware/acpi/interrupts/gpe13:       0    invalid
/sys/firmware/acpi/interrupts/gpe14:       0    invalid
/sys/firmware/acpi/interrupts/gpe15:       0    invalid
/sys/firmware/acpi/interrupts/gpe16:       0    invalid
/sys/firmware/acpi/interrupts/gpe17:       0    enabled
/sys/firmware/acpi/interrupts/gpe18:       0    enabled
/sys/firmware/acpi/interrupts/gpe19:       0    invalid
/sys/firmware/acpi/interrupts/gpe1A:       0    invalid
/sys/firmware/acpi/interrupts/gpe1B:       0    invalid
/sys/firmware/acpi/interrupts/gpe1C:       0    invalid
/sys/firmware/acpi/interrupts/gpe1D:       0    invalid
/sys/firmware/acpi/interrupts/gpe1E:       0    invalid
/sys/firmware/acpi/interrupts/gpe1F:       0    invalid

/sys/firmware/acpi/interrupts/gpe_all: 0
/sys/firmware/acpi/interrupts/sci: 0

and after 10 times pressing the power button and opening/closing the lid:

/sys/firmware/acpi/interrupts/error: 0
/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled

/sys/firmware/acpi/interrupts/ff_pmtimer:       0    invalid
/sys/firmware/acpi/interrupts/ff_pwr_btn:       0    invalid
/sys/firmware/acpi/interrupts/ff_rt_clk:       0    disabled
/sys/firmware/acpi/interrupts/ff_slp_btn:       0    invalid
/sys/firmware/acpi/interrupts/gpe00:       0    invalid
/sys/firmware/acpi/interrupts/gpe01:       0    enabled
/sys/firmware/acpi/interrupts/gpe02:       0    enabled
/sys/firmware/acpi/interrupts/gpe03:       0    disabled
/sys/firmware/acpi/interrupts/gpe04:       0    disabled
/sys/firmware/acpi/interrupts/gpe05:       0    disabled
/sys/firmware/acpi/interrupts/gpe06:       0    enabled
/sys/firmware/acpi/interrupts/gpe07:       0    enabled
/sys/firmware/acpi/interrupts/gpe08:       0    invalid
/sys/firmware/acpi/interrupts/gpe09:       0    disabled
/sys/firmware/acpi/interrupts/gpe0A:       0    invalid
/sys/firmware/acpi/interrupts/gpe0B:       0    enabled
/sys/firmware/acpi/interrupts/gpe0C:       0    disabled
/sys/firmware/acpi/interrupts/gpe0D:       0    disabled
/sys/firmware/acpi/interrupts/gpe0E:       0    disabled
/sys/firmware/acpi/interrupts/gpe0F:       0    invalid
/sys/firmware/acpi/interrupts/gpe10:       0    invalid
/sys/firmware/acpi/interrupts/gpe11:       0    invalid
/sys/firmware/acpi/interrupts/gpe12:       0    invalid
/sys/firmware/acpi/interrupts/gpe13:       0    invalid
/sys/firmware/acpi/interrupts/gpe14:       0    invalid
/sys/firmware/acpi/interrupts/gpe15:       0    invalid
/sys/firmware/acpi/interrupts/gpe16:       0    invalid
/sys/firmware/acpi/interrupts/gpe17:       0    enabled
/sys/firmware/acpi/interrupts/gpe18:       0    enabled
/sys/firmware/acpi/interrupts/gpe19:       0    invalid
/sys/firmware/acpi/interrupts/gpe1A:       0    invalid
/sys/firmware/acpi/interrupts/gpe1B:       0    invalid
/sys/firmware/acpi/interrupts/gpe1C:       0    invalid
/sys/firmware/acpi/interrupts/gpe1D:       0    invalid
/sys/firmware/acpi/interrupts/gpe1E:       0    invalid
/sys/firmware/acpi/interrupts/gpe1F:       0    invalid

/sys/firmware/acpi/interrupts/gpe_all: 0
/sys/firmware/acpi/interrupts/sci: 0

I cant see any difference...

regards

sebastian

Quoted 57 lines
Quoted 51 lines

regards

sebastian

Quoted 46 lines
Quoted 44 lines

sony/hotkey SPIC 00000001 00000021

Quoted 9 lines

run "cat /proc/interrupts" both before and after pressing these buttons, does the number of ACPI or sony interrupts increase?
If ACPI interrupts increases, please run
"grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed event is fired.

Only the stamina switch and the s2 button increase any interrupts but only sony interrupts are generated.

Quoted 10 lines
Quoted 10 lines

Should i post them to bugtrackter or
something else?

Quoted 11 lines

please file a new bug report at
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
and attach all the request info there.
please also attach the acpidump output.

thanks,
rui

thank you!

regards

sebastian

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#8 lore raw
Quoted 18 lines · Rui
Quoted 9 lines

-----Original Message-----
From: Sebastian Pohl [mailto:[email protected]]
Sent: Tuesday, June 23, 2009 5:14 PM
To: Zhang, Rui
Cc: [email protected]; Mattia Dongili
Subject: Re: acpi on sony vaio vgn-sz61mn

Quoted 1 line
Quoted 9 lines

Hi,

this is before:

/sys/firmware/acpi/interrupts/error: 0
/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled

/sys/firmware/acpi/interrupts/ff_pmtimer:       0    invalid
/sys/firmware/acpi/interrupts/ff_pwr_btn:       0    invalid
Quoted 7 lines

[Rui] power button fixed event is invalid?
Please make sure CONFIG_ACPI_BUTTON=m/y

Thanks,
rui

It was set to

CONFIG_ACPI_BUTTON=m

ist that right or should i change it?

regards

sebastian

Quoted 65 lines
Quoted 63 lines
Quoted 63 lines
Quoted 57 lines

regards

sebastian

Quoted 50 lines
Quoted 49 lines

sony/hotkey SPIC 00000001 00000021

Quoted 10 lines

run "cat /proc/interrupts" both before and after pressing these buttons, does the number of ACPI or sony interrupts increase?
If ACPI interrupts increases, please run
"grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed event is fired.

Only the stamina switch and the s2 button increase any interrupts but only sony interrupts are generated.

Quoted 10 lines
Quoted 10 lines

Should i post them to bugtrackter or
something else?

Quoted 12 lines

please file a new bug report at
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
and attach all the request info there.
please also attach the acpidump output.

thanks,
rui

thank you!

regards

sebastian

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#9 lore raw
Quoted 26 lines · Sebastian Pohl
Quoted 18 lines · Rui
Quoted 9 lines

-----Original Message-----
From: Sebastian Pohl [mailto:[email protected]]
Sent: Tuesday, June 23, 2009 5:14 PM
To: Zhang, Rui
Cc: [email protected]; Mattia Dongili
Subject: Re: acpi on sony vaio vgn-sz61mn

Quoted 1 line
Quoted 9 lines

Hi,

this is before:

/sys/firmware/acpi/interrupts/error: 0
/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled

/sys/firmware/acpi/interrupts/ff_pmtimer:       0    invalid
/sys/firmware/acpi/interrupts/ff_pwr_btn:       0    invalid
Quoted 7 lines

[Rui] power button fixed event is invalid?
Please make sure CONFIG_ACPI_BUTTON=m/y

Thanks,
rui

Quoted 6 lines

It was set to

CONFIG_ACPI_BUTTON=m

ist that right or should i change it?

please make sure it's loaded.
please attach the output of "grep . /proc/acpi/button/*/*/*"

thanks,
rui

author
#10 lore raw
Quoted 38 lines · Zhang Rui
Quoted 36 lines · Sebastian Pohl
Quoted 22 lines · Rui
Quoted 12 lines

-----Original Message-----
From: Sebastian Pohl [mailto:[email protected]]
Sent: Tuesday, June 23, 2009 5:14 PM
To: Zhang, Rui
Cc: [email protected]; Mattia Dongili
Subject: Re: acpi on sony vaio vgn-sz61mn

Quoted 2 lines
Quoted 10 lines

Hi,

this is before:

/sys/firmware/acpi/interrupts/error: 0
/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled

/sys/firmware/acpi/interrupts/ff_pmtimer:       0    invalid
/sys/firmware/acpi/interrupts/ff_pwr_btn:       0    invalid
Quoted 8 lines

[Rui] power button fixed event is invalid?
Please make sure CONFIG_ACPI_BUTTON=m/y

Thanks,
rui

It was set to

CONFIG_ACPI_BUTTON=m

Quoted 9 lines
Quoted 3 lines

ist that right or should i change it?

please make sure it's loaded.
please attach the output of "grep . /proc/acpi/button/*/*/*"

thanks,
rui

Hi,

the output is

/proc/acpi/button/lid/LID0/info:type: Lid Switch
/proc/acpi/button/lid/LID0/state:state: open
/proc/acpi/button/power/PWRB/info:type: Power Button (CM)

I found it interesting that theres a lid switch status listed. So i tried with a magnet to trigger it and it came out like this:

/proc/acpi/button/lid/LID0/info:type: Lid Switch
/proc/acpi/button/lid/LID0/state:state: closed
/proc/acpi/button/power/PWRB/info:type: Power Button (CM)

So this makes me think that the lid-switch itself is somehow reporting its status but it doesnt have any effects.

regards

sebastian

#11 lore raw

please attach the full dmesg output in the bugzilla. and let's move the discussion there. :)

thanks,
rui

Quoted 74 lines · Sebastian Pohl
Quoted 38 lines · Zhang Rui
Quoted 36 lines · Sebastian Pohl
Quoted 22 lines · Rui
Quoted 12 lines

-----Original Message-----
From: Sebastian Pohl [mailto:[email protected]]
Sent: Tuesday, June 23, 2009 5:14 PM
To: Zhang, Rui
Cc: [email protected]; Mattia Dongili
Subject: Re: acpi on sony vaio vgn-sz61mn

Quoted 2 lines
Quoted 10 lines

Hi,

this is before:

/sys/firmware/acpi/interrupts/error: 0
/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled

/sys/firmware/acpi/interrupts/ff_pmtimer:       0    invalid
/sys/firmware/acpi/interrupts/ff_pwr_btn:       0    invalid
Quoted 8 lines

[Rui] power button fixed event is invalid?
Please make sure CONFIG_ACPI_BUTTON=m/y

Thanks,
rui

It was set to

CONFIG_ACPI_BUTTON=m

Quoted 9 lines
Quoted 3 lines

ist that right or should i change it?

please make sure it's loaded.
please attach the output of "grep . /proc/acpi/button/*/*/*"

thanks,
rui

Hi,

the output is

/proc/acpi/button/lid/LID0/info:type: Lid Switch
/proc/acpi/button/lid/LID0/state:state: open
/proc/acpi/button/power/PWRB/info:type: Power Button (CM)

I found it interesting that theres a lid switch status listed. So i tried with a magnet to trigger it and it came out like this:

/proc/acpi/button/lid/LID0/info:type: Lid Switch
/proc/acpi/button/lid/LID0/state:state: closed
/proc/acpi/button/power/PWRB/info:type: Power Button (CM)

So this makes me think that the lid-switch itself is somehow reporting its status but it doesnt have any effects.

regards

sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#12 lore raw

Hi,

i opened a bug here http://bugzilla.kernel.org/show_bug.cgi?id=13607

and i will attach the dmesg output later when i get to my notebook.

regards

sebastian

Quoted 93 lines · Zhang Rui

please attach the full dmesg output in the bugzilla. and let's move the discussion there. :)

thanks,
rui

Quoted 83 lines · Sebastian Pohl
Quoted 49 lines · Zhang Rui
Quoted 38 lines · Sebastian Pohl
Quoted 26 lines · Rui
Quoted 15 lines

-----Original Message-----
From: Sebastian Pohl [mailto:[email protected]]
Sent: Tuesday, June 23, 2009 5:14 PM
To: Zhang, Rui
Cc: [email protected]; Mattia Dongili
Subject: Re: acpi on sony vaio vgn-sz61mn

Quoted 3 lines
Quoted 11 lines

Hi,

this is before:

/sys/firmware/acpi/interrupts/error: 0
/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled

/sys/firmware/acpi/interrupts/ff_pmtimer:       0    invalid
/sys/firmware/acpi/interrupts/ff_pwr_btn:       0    invalid
Quoted 9 lines

[Rui] power button fixed event is invalid?
Please make sure CONFIG_ACPI_BUTTON=m/y

Thanks,
rui

Quoted 8 lines

It was set to

CONFIG_ACPI_BUTTON=m

ist that right or should i change it?

Quoted 7 lines

please make sure it's loaded.
please attach the output of "grep . /proc/acpi/button/*/*/*"

thanks,
rui

Hi,

the output is

/proc/acpi/button/lid/LID0/info:type: Lid Switch
/proc/acpi/button/lid/LID0/state:state: open
/proc/acpi/button/power/PWRB/info:type: Power Button (CM)

I found it interesting that theres a lid switch status listed. So i tried with a magnet to trigger it and it came out like this:

/proc/acpi/button/lid/LID0/info:type: Lid Switch
/proc/acpi/button/lid/LID0/state:state: closed
/proc/acpi/button/power/PWRB/info:type: Power Button (CM)

So this makes me think that the lid-switch itself is somehow reporting its status but it doesnt have any effects.

regards

sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#13 lore raw
In reply to Sebastian Pohl
Quoted 5 lines · Sebastian Pohl

Hello everyone!

Thank you to everyone working on the sony stuff! It made my laptop a much more valuable companion!

Quoted 7 lines

But there are still some flaws that are left. I am writing to get an advise what to do with them. Should i post them to bugtrackter or something else?

Ok, the problems are:

- The special button s2 generates the same acpi event as the stamina switch

yep, I have some ideas how to fix it in sony-laptop, I'll try to get it done this weekend.

Quoted 2 lines

- The lidswitch does not generate any acpi events
- The Power does not generate any acpi events

these should be part of the main acpi code, please follow Zhang directions to debug this.

Thanks

Signature · 2 lines
mattia
:wq!