Skip to contentSkip to conversation

da9030: ldo11 ignores disable

DISCUSSION Jonathan Cameron 3 participants 6 messages Jun 25, 2009 – Jul 14, 2009

lore
Share & tools
lore
#0 lore raw

Hi All,

Whilst testing a regulator machine config I've run into a weird issue.

The preliminary data sheet I have suggests that there are two enable registers
for ldo11 but neither rctl22 or rctl11 seems to have any effect (on their own
or both cleared together). I can change the voltage just fine, but not actually turn it off.

Anyone come across this problem or have any idea what is going on?

Thanks,

Jonathan

#1 lore raw
Quoted 4 lines · Jonathan Cameron

Hi All,

Whilst testing a regulator machine config I've run into a weird issue.

Quoted 8 lines

The preliminary data sheet I have suggests that there are two enable registers
for ldo11 but neither rctl22 or rctl11 seems to have any effect (on their own
or both cleared together). I can change the voltage just fine, but not actually turn it off.

Anyone come across this problem or have any idea what is going on?

I've come across something similar in the past with two enable bits causing I2C register cache coherency issues. The cache bits became out of sync with reality and stopped some I2C writes happening.

Another option is that your hardware config doesn't allow ldo11 to be disabled ?

HTH

Liam

#2 lore raw
Quoted 12 lines · Liam Girdwood
Quoted 11 lines · Jonathan Cameron

Hi All,

Whilst testing a regulator machine config I've run into a weird issue.

The preliminary data sheet I have suggests that there are two enable registers
for ldo11 but neither rctl22 or rctl11 seems to have any effect (on their own
or both cleared together). I can change the voltage just fine, but not actually turn it off.

Quoted 5 lines
Quoted 1 line

Anyone come across this problem or have any idea what is going on?

I've come across something similar in the past with two enable bits causing I2C register cache coherency issues. The cache bits became out of sync with reality and stopped some I2C writes happening.

Don't thing that could happen here.

Quoted 3 lines

Another option is that your hardware config doesn't allow ldo11 to be disabled ?

Other than the obvious possibility that the hardware has a bug, I can't seem to find a reason why this shouldn't work.

Thanks,

Jonathan

#3 lore raw
Quoted 14 lines · Jonathan Cameron
Quoted 13 lines · Liam Girdwood
Quoted 12 lines · Jonathan Cameron

Hi All,

Whilst testing a regulator machine config I've run into a weird issue.

The preliminary data sheet I have suggests that there are two enable registers
for ldo11 but neither rctl22 or rctl11 seems to have any effect (on their own
or both cleared together). I can change the voltage just fine, but not actually turn it off.

Anyone come across this problem or have any idea what is going on?

Quoted 9 lines
Quoted 3 lines

I've come across something similar in the past with two enable bits causing I2C register cache coherency issues. The cache bits became out of sync with reality and stopped some I2C writes happening.

Don't thing that could happen here.

Quoted 2 lines

Another option is that your hardware config doesn't allow ldo11 to be disabled ?

Other than the obvious possibility that the hardware has a bug, I can't seem to find a reason why this shouldn't work.

I didn't meet this problem, Haojian & Paul, ever had this problem before? Or try lookup the Errata for the Arava chip.

#4 lore raw
Quoted 19 lines · Eric Miao
Quoted 18 lines · Jonathan Cameron
Quoted 12 lines · Liam Girdwood
Quoted 11 lines · Jonathan Cameron

Hi All,

Whilst testing a regulator machine config I've run into a weird issue.

The preliminary data sheet I have suggests that there are two enable registers
for ldo11 but neither rctl22 or rctl11 seems to have any effect (on their own
or both cleared together). I can change the voltage just fine, but not actually turn it off.

Quoted 4 lines
Quoted 1 line

Anyone come across this problem or have any idea what is going on?

I've come across something similar in the past with two enable bits causing I2C register cache coherency issues. The cache bits became out of sync with reality and stopped some I2C writes happening.

Don't thing that could happen here.

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

Another option is that your hardware config doesn't allow ldo11 to be disabled ?

Other than the obvious possibility that the hardware has a bug, I can't seem to find a reason why this shouldn't work.

I didn't meet this problem, Haojian & Paul, ever had this problem before? Or try lookup the Errata for the Arava chip.

Hi Jonathan,

Here's a hint, check register 0x1b - which looks suspicious to me to have some side effects to LDO11.

#5 lore raw
Quoted 25 lines · Eric Miao
Quoted 24 lines · Eric Miao
Quoted 23 lines · Jonathan Cameron
Quoted 12 lines · Liam Girdwood
Quoted 11 lines · Jonathan Cameron

Hi All,

Whilst testing a regulator machine config I've run into a weird issue.

The preliminary data sheet I have suggests that there are two enable registers
for ldo11 but neither rctl22 or rctl11 seems to have any effect (on their own
or both cleared together). I can change the voltage just fine, but not actually turn it off.

Quoted 4 lines
Quoted 1 line

Anyone come across this problem or have any idea what is going on?

I've come across something similar in the past with two enable bits causing I2C register cache coherency issues. The cache bits became out of sync with reality and stopped some I2C writes happening.

Don't thing that could happen here.

Quoted 2 lines

Another option is that your hardware config doesn't allow ldo11 to be disabled ?

Other than the obvious possibility that the hardware has a bug, I can't seem to find a reason why this shouldn't work.

Quoted 8 lines
Quoted 2 lines

I didn't meet this problem, Haojian & Paul, ever had this problem before? Or try lookup the Errata for the Arava chip.

Hi Jonathan,

Here's a hint, check register 0x1b - which looks suspicious to me to have some side effects to LDO11.

Thanks Eric,

I'll have a play and see if this reg (start up control) effects the ability to turn it off at other points.

Jonathan