asm-generic: Consolidate errno.h to asm-generic/errno.h]
PATCH 1/1 asm-generic: Consolidate errno.h to asm-generic/errno.h]
Hi Stefan,
have you got my email with that consolidation patch? I sent it to mailing list but I haven't seen it there.
Thanks,
Michal
-------- Original Message --------
Subject: [PATCH] asm-generic: Consolidate errno.h to asm-generic/errno.h
Date: Tue, 30 Jun 2009 23:47:30 +1000
From: [email protected]
To: u-boot at lists.denx.de
CC: michal.simek at petalogix.com, Michal Simek <[email protected]>
From: Michal Simek <[email protected]>
This patch use blackfin errno.h implementation which correspond Linux kernel one.
MIPS implemetation is different that's why I keep it.
I removed ppc_error_no.h from Marvell boards which was the same too.
--- board/Marvell/common/ppc_error_no.h | 164 ----------------------------------- board/Marvell/db64360/mv_eth.h | 3 +- board/Marvell/db64460/mv_eth.h | 2 +- board/prodrive/p3mx/mv_eth.h | 2 +- include/asm-arm/errno.h | 139 +----------------------------- include/asm-avr32/errno.h | 133 +---------------------------- include/asm-blackfin/errno.h | 157 +--------------------------------- include/asm-generic/errno.h | 155 +++++++++++++++++++++++++++++++++ include/asm-m68k/errno.h | 139 +----------------------------- include/asm-microblaze/errno.h | 1 + include/asm-ppc/errno.h | 139 +----------------------------- include/asm-sh/errno.h | 157 +--------------------------------- include/asm-sparc/errno.h | 163 +---------------------------------- 13 files changed, 166 insertions(+), 1188 deletions(-) delete mode 100644 board/Marvell/common/ppc_error_no.h create mode 100644 include/asm-generic/errno.h create mode 100644 include/asm-microblaze/errno.h
board/Marvell/common/ppc_error_no.h deleted +0 -164
@@ -1,164 +0,0 @@ -/* -* (C) Copyright 2003 -* Ingo Assmus <[email protected]> -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ - -/* -* BK Id: SCCS/s.errno.h 1.9 06/05/01 21:45:21 paulus -*/ -#ifndef _MV_PPC_ERRNO_H -#define _MV_PPC_ERRNO_H - -#define EPERM 1/* Operation not permitted */ -#define ENOENT 2/* No such file or directory */ -#define ESRCH 3/* No such process */ -#define EINTR 4/* Interrupted system call */ -#define EIO 5/* I/O error */ -#define ENXIO 6/* No such device or address */ -#define E2BIG 7/* Arg list too long */ -#define ENOEXEC 8/* Exec format error */ -#define EBADF 9/* Bad file number */ -#define ECHILD 10/* No child processes */ -#define EAGAIN 11/* Try again */ -#define ENOMEM 12/* Out of memory */ -#define EACCES 13/* Permission denied */ -#define EFAULT 14/* Bad address */ -#define ENOTBLK 15/* Block device required */ -#define EBUSY 16/* Device or resource busy */ -#define EEXIST 17/* File exists */ -#define EXDEV 18/* Cross-device link */ -#define ENODEV 19/* No such device */ -#define ENOTDIR 20/* Not a directory */ -#define EISDIR 21/* Is a directory */ -#define EINVAL 22/* Invalid argument */ -#define ENFILE 23/* File table overflow */ -#define EMFILE 24/* Too many open files */ -#define ENOTTY 25/* Not a typewriter */ -#define ETXTBSY 26/* Text file busy */ -#define EFBIG 27/* File too large */ -#define ENOSPC 28/* No space left on device */ -#define ESPIPE 29/* Illegal seek */ -#define EROFS 30/* Read-only file system */ -#define EMLINK 31/* Too many links */ -#define EPIPE 32/* Broken pipe */ -#define EDOM 33/* Math argument out of domain of func */ -#define ERANGE 34/* Math result not representable */ -#define EDEADLK 35/* Resource deadlock would occur */ -#define ENAMETOOLONG 36/* File name too long */ -#define ENOLCK 37/* No record locks available */ -#define ENOSYS 38/* Function not implemented */ -#define ENOTEMPTY 39/* Directory not empty */ -#define ELOOP 40/* Too many symbolic links encountered */ -#define EWOULDBLOCK EAGAIN/* Operation would block */ -#define ENOMSG 42/* No message of desired type */ -#define EIDRM 43/* Identifier removed */ -#define ECHRNG 44/* Channel number out of range */ -#define EL2NSYNC 45/* Level 2 not synchronized */ -#define EL3HLT 46/* Level 3 halted */ -#define EL3RST 47/* Level 3 reset */ -#define ELNRNG 48/* Link number out of range */ -#define EUNATCH 49/* Protocol driver not attached */ -#define ENOCSI 50/* No CSI structure available */ -#define EL2HLT 51/* Level 2 halted */ -#define EBADE 52/* Invalid exchange */ -#define EBADR 53/* Invalid request descriptor */ -#define EXFULL 54/* Exchange full */ -#define ENOANO 55/* No anode */ -#define EBADRQC 56/* Invalid request code */ -#define EBADSLT 57/* Invalid slot */ -#define EDEADLOCK 58/* File locking deadlock error */ -#define EBFONT 59/* Bad font file format */ -#define ENOSTR 60/* Device not a stream */ -#define ENODATA 61/* No data available */ -#define ETIME 62/* Timer expired */ -#define ENOSR 63/* Out of streams resources */ -#define ENONET 64/* Machine is not on the network */ -#define ENOPKG 65/* Package not installed */ -#define EREMOTE 66/* Object is remote */ -#define ENOLINK 67/* Link has been severed */ -#define EADV 68/* Advertise error */ -#define ESRMNT 69/* Srmount error */ -#define ECOMM 70/* Communication error on send */ -#define EPROTO 71/* Protocol error */ -#define EMULTIHOP 72/* Multihop attempted */ -#define EDOTDOT 73/* RFS specific error */ -#define EBADMSG 74/* Not a data message */ -#define EOVERFLOW 75/* Value too large for defined data type */ -#define ENOTUNIQ 76/* Name not unique on network */ -#define EBADFD 77/* File descriptor in bad state */ -#define EREMCHG 78/* Remote address changed */ -#define ELIBACC 79/* Can not access a needed shared library */ -#define ELIBBAD 80/* Accessing a corrupted shared library */ -#define ELIBSCN 81/* .lib section in a.out corrupted */ -#define ELIBMAX 82/* Attempting to link in too many shared libraries */ -#define ELIBEXEC 83/* Cannot exec a shared library directly */ -#define EILSEQ 84/* Illegal byte sequence */ -#define ERESTART 85/* Interrupted system call should be restarted */ -#define ESTRPIPE 86/* Streams pipe error */ -#define EUSERS 87/* Too many users */ -#define ENOTSOCK 88/* Socket operation on non-socket */ -#define EDESTADDRREQ 89/* Destination address required */ -#define EMSGSIZE 90/* Message too long */ -#define EPROTOTYPE 91/* Protocol wrong type for socket */ -#define ENOPROTOOPT 92/* Protocol not available */ -#define EPROTONOSUPPORT 93/* Protocol not supported */ -#define ESOCKTNOSUPPORT 94/* Socket type not supported */ -#define EOPNOTSUPP 95/* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 96/* Protocol family not supported */ -#define EAFNOSUPPORT 97/* Address family not supported by protocol */ -#define EADDRINUSE 98/* Address already in use */ -#define EADDRNOTAVAIL 99/* Cannot assign requested address */ -#define ENETDOWN 100/* Network is down */ -#define ENETUNREACH 101/* Network is unreachable */ -#define ENETRESET 102/* Network dropped connection because of reset */ -#define ECONNABORTED 103/* Software caused connection abort */ -#define ECONNRESET 104/* Connection reset by peer */ -#define ENOBUFS 105/* No buffer space available */ -#define EISCONN 106/* Transport endpoint is already connected */ -#define ENOTCONN 107/* Transport endpoint is not connected */ -#define ESHUTDOWN 108/* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 109/* Too many references: cannot splice */ -#define ETIMEDOUT 110/* Connection timed out */ -#define ECONNREFUSED 111/* Connection refused */ -#define EHOSTDOWN 112/* Host is down */ -#define EHOSTUNREACH 113/* No route to host */ -#define EALREADY 114/* Operation already in progress */ -#define EINPROGRESS 115/* Operation now in progress */ -#define ESTALE 116/* Stale NFS file handle */ -#define EUCLEAN 117/* Structure needs cleaning */ -#define ENOTNAM 118/* Not a XENIX named type file */ -#define ENAVAIL 119/* No XENIX semaphores available */ -#define EISNAM 120/* Is a named type file */ -#define EREMOTEIO 121/* Remote I/O error */ -#define EDQUOT 122/* Quota exceeded */ - -#define ENOMEDIUM 123/* No medium found */ -#define EMEDIUMTYPE 124/* Wrong medium type */ - -/* Should never be seen by user programs */ -#define ERESTARTSYS 512 -#define ERESTARTNOINTR 513 -#define ERESTARTNOHAND 514/* restart if no handler.. */ -#define ENOIOCTLCMD 515/* No ioctl command */ - -#define _LAST_ERRNO 515 - -#endif
board/Marvell/db64360/mv_eth.h +1 -2
@@ -37,8 +37,7 @@#include <common.h> #include <net.h> #include "mv_regs.h" -#include "../common/ppc_error_no.h" - +#include <asm/errno.h> /************************************************************************* **************************************************************************
board/Marvell/db64460/mv_eth.h +1 -1
@@ -37,7 +37,7 @@#include <common.h> #include <net.h> #include "mv_regs.h" -#include "../common/ppc_error_no.h" +#include <asm/errno.h> /*************************************************************************
board/prodrive/p3mx/mv_eth.h +1 -1
@@ -37,7 +37,7 @@#include <common.h> #include <net.h> #include "mv_regs.h" -#include "ppc_error_no.h" +#include <asm/errno.h> #include "../../Marvell/include/core.h" /*************************************************************************
include/asm-arm/errno.h +1 -138
139 lines not on this page · raw message
include/asm-avr32/errno.h +1 -132
133 lines not on this page · raw message
include/asm-blackfin/errno.h +1 -156
157 lines not on this page · raw message
include/asm-generic/errno.h new file +155 -0
155 lines not on this page · raw message
include/asm-m68k/errno.h +1 -138
139 lines not on this page · raw message
include/asm-microblaze/errno.h new file +1 -0
@@ -0,0 +1 @@ +#include <asm-generic/errno.h>
include/asm-ppc/errno.h +1 -138
139 lines not on this page · raw message
include/asm-sh/errno.h +1 -156
157 lines not on this page · raw message
include/asm-sparc/errno.h +1 -162
163 lines not on this page · raw message
Signature · 6 lines
1.5.5.1 -- Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854
PATCH 1/1 asm-generic: Consolidate errno.h to asm-generic/errno.h]
Hi Michal,
Quoted 2 lines · On Monday 06 July 2009 09:41:26 Michal Simek wrote:
have you got my email with that consolidation patch? I sent it to mailing list but I haven't seen it there.
Yes, I've seen the patch. And I received this mail via the list as well.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================