bootcount support on arm/kirkwood
Hello,
does somebody know, if it is possible to use the uboot bootcount feature on an ARM926EJS (CPU Core Version FEROCEON_88FR131 SOC Family: KIRKWOOD, KW88F6281) based board ?
I searched for some space on this CPU for implementing this feature, but could not find any (at least 4 bytes = 1 register), which not lost his value on a reset of this CPU.
thanks in advance
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Quoted 11 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Heiko Schocher
Sent: Wednesday, July 08, 2009 6:42 PM
To: U-Boot user list
Subject: [U-Boot] bootcount support on arm/kirkwoodHello,
Quoted 8 lines
does somebody know, if it is possible to use the uboot bootcount feature on an ARM926EJS (CPU Core Version
FEROCEON_88FR131SOC Family: KIRKWOOD, KW88F6281) based board ?I searched for some space on this CPU for implementing this feature, but could not find any (at least 4 bytes = 1 register), which not lost his value on a reset of this CPU.
There is reset counter register on Kirkwood which counts the time for which H/w Reset is pressed-n-hold. This is generally used to trigger "Factory Reset" Kind of function using reset key.
I don't think you are searching for the same. Do you?
BTW: What's your end use case?
Reagrds..
Prafulla . .
Quoted 11 lines
thanks in advance
HeikosSignature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Dear Prafulla Wadaskar,
Quoted 7 lines · In message <[email protected]>…
Quoted 4 lines
I searched for some space on this CPU for implementing this feature, but could not find any (at least 4 bytes = 1 register), which not lost his value on a reset of this CPU.
There is reset counter register on Kirkwood which counts the time for which H/w Reset is pressed-n-hold. This is generally used to trigger "Factory Reset" Kind of function using reset key.
I don't think you are searching for the same. Do you?
No, he doesn't. He needs a register that is guaranteed to keep it''s values across a processor reset.
Quoted 1 line
BTW: What's your end use case?
The boot counter counts the number of (failed) boot attempts (i. e. processor resets minus one) after power on. See
http://www.denx.de/wiki/view/DULG/UBootBootCountLimit
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de PLEASE NOTE: Some Quantum Physics Theories Suggest That When the Con- sumer Is Not Directly Observing This Product, It May Cease to Exist or Will Exist Only in a Vague and Undetermined State.
Quoted 20 lines
-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de]
Sent: Thursday, July 09, 2009 12:29 AM
To: Prafulla Wadaskar
Cc: hs at denx.de; U-Boot user list; Prabhanjan Sarnaik; Ashish Karkare
Subject: Re: [U-Boot] bootcount support on arm/kirkwoodDear Prafulla Wadaskar,
In message <[email protected].
Quoted 2 lines · com> you wrote:
Quoted 2 lines
I searched for some space on this CPU for implementing
this feature,
Quoted 3 lines
Quoted 2 lines
but could not find any (at least 4 bytes = 1 register), which not lost his value on a reset of this CPU.
There is reset counter register on Kirkwood which counts
Quoted 8 lines
the time for which H/w Reset is pressed-n-hold. This is generally used to trigger "Factory Reset" Kind of function using reset key.
Quoted 2 lines
I don't think you are searching for the same. Do you?
No, he doesn't. He needs a register that is guaranteed to keep it''s values across a processor reset.
With Kirkwood, the only way to implement it is with flash assist
Regards..
Prafulla . .
Hello Prafulla,
Quoted 18 lines · Prafulla Wadaskar
Quoted 18 lines
-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de]
Sent: Thursday, July 09, 2009 12:29 AM
To: Prafulla Wadaskar
Cc: hs at denx.de; U-Boot user list; Prabhanjan Sarnaik; Ashish Karkare
Subject: Re: [U-Boot] bootcount support on arm/kirkwoodDear Prafulla Wadaskar,
In message <[email protected].
Quoted 2 lines · com> you wrote:
Quoted 2 lines
I searched for some space on this CPU for implementing
this feature,
Quoted 3 lines
Quoted 2 lines
but could not find any (at least 4 bytes = 1 register), which not lost his value on a reset of this CPU.
There is reset counter register on Kirkwood which counts
Quoted 8 lines
Quoted 6 lines
the time for which H/w Reset is pressed-n-hold. This is generally used to trigger "Factory Reset" Kind of function using reset key.
Quoted 1 line
I don't think you are searching for the same. Do you?
No, he doesn't. He needs a register that is guaranteed to keep it''s values across a processor reset.
With Kirkwood, the only way to implement it is with flash assist
No chance? Is there really no register/mem array which keep its value across a processor reset?
There is a "Security Accelerator SRAM" on this chip. Couldn;t I use it? (I looked at it, but it seems, the SRAM gets initialized by reset, but maybe there is a way to deactivate this initialization?)
thanks in advance
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Quoted 42 lines
-----Original Message-----
From: Heiko Schocher [mailto:hs at denx.de]
Sent: Thursday, July 09, 2009 12:05 PM
To: Prafulla Wadaskar
Cc: Wolfgang Denk; U-Boot user list; Prabhanjan Sarnaik; Ashish Karkare
Subject: Re: [U-Boot] bootcount support on arm/kirkwoodHello Prafulla,
Quoted 5 lines · Prafulla Wadaskar
Quoted 5 lines
-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de]
Sent: Thursday, July 09, 2009 12:29 AM
To: Prafulla Wadaskar
Cc: hs at denx.de; U-Boot user list; Prabhanjan Sarnaik;Ashish Karkare
Quoted 11 lines
Quoted 11 lines
Subject: Re: [U-Boot] bootcount support on arm/kirkwood
Dear Prafulla Wadaskar,
In message <[email protected].
Quoted 2 lines · com> you wrote:
Quoted 2 lines
I searched for some space on this CPU for implementing
this feature,
Quoted 1 line
Quoted 1 line
but could not find any (at least 4 bytes = 1 register),
which not
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
Quoted 1 line
lost his value on a reset of this CPU.
There is reset counter register on Kirkwood which counts
the time for which H/w Reset is pressed-n-hold. This is generally used to trigger "Factory Reset" Kind of function using reset key.
Quoted 1 line
I don't think you are searching for the same. Do you?
No, he doesn't. He needs a register that is guaranteed to
keep it''s
Quoted 3 lines
Quoted 1 line
values across a processor reset.
With Kirkwood, the only way to implement it is with flash assist
Quoted 7 lines
No chance? Is there really no register/mem array which keep its value across a processor reset?
There is a "Security Accelerator SRAM" on this chip. Couldn;t I use it? (I looked at it, but it seems, the SRAM gets initialized by reset, but maybe there is a way to deactivate this initialization?)
Do you want only across reboots(i.e. resets)? How about re-power cycle? Regards..
Prafulla . .
Quoted 7 lines
thanks in advance
HeikoSignature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hello Prafulla,
Quoted 38 lines · Prafulla Wadaskar
Quoted 38 lines
-----Original Message-----
From: Heiko Schocher [mailto:hs at denx.de]
Sent: Thursday, July 09, 2009 12:05 PM
To: Prafulla Wadaskar
Cc: Wolfgang Denk; U-Boot user list; Prabhanjan Sarnaik; Ashish Karkare
Subject: Re: [U-Boot] bootcount support on arm/kirkwoodHello Prafulla,
Quoted 5 lines · Prafulla Wadaskar
Quoted 5 lines
-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de]
Sent: Thursday, July 09, 2009 12:29 AM
To: Prafulla Wadaskar
Cc: hs at denx.de; U-Boot user list; Prabhanjan Sarnaik;Ashish Karkare
Quoted 11 lines
Quoted 11 lines
Subject: Re: [U-Boot] bootcount support on arm/kirkwood
Dear Prafulla Wadaskar,
In message <[email protected].
Quoted 2 lines · com> you wrote:
Quoted 2 lines
I searched for some space on this CPU for implementing
this feature,
Quoted 1 line
Quoted 1 line
but could not find any (at least 4 bytes = 1 register),
which not
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
Quoted 1 line
lost his value on a reset of this CPU.
There is reset counter register on Kirkwood which counts
the time for which H/w Reset is pressed-n-hold. This is generally used to trigger "Factory Reset" Kind of function using reset key.
Quoted 1 line
I don't think you are searching for the same. Do you?
No, he doesn't. He needs a register that is guaranteed to
keep it''s
Quoted 2 lines
Quoted 1 line
values across a processor reset.
With Kirkwood, the only way to implement it is with flash assist
Quoted 8 lines
Quoted 7 lines
No chance? Is there really no register/mem array which keep its value across a processor reset?
There is a "Security Accelerator SRAM" on this chip. Couldn;t I use it? (I looked at it, but it seems, the SRAM gets initialized by reset, but maybe there is a way to deactivate this initialization?)
Do you want only across reboots(i.e. resets)? How about re-power cycle?
Yes, I need this only across reboots (processor resets). If the board is powered off/on, the value of this area gets new initialized from software.
bye
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Dear Prafulla Wadaskar,
Quoted 3 lines · In message <[email protected]>…
Quoted 3 lines
No chance? Is there really no register/mem array which keep its value across a processor reset?
...
Quoted 1 line
Do you want only across reboots(i.e. resets)? How about re-power cycle?
It needs to keep it's value only through resets; it is assumed that power cycling gets detected independently from that, in which case this boot counter would be reset to 0.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de A Puritan is someone who is deathly afraid that someone, somewhere, is having fun.
Dear Prafulla Wadaskar,
Quoted 5 lines · In message <[email protected]>…
Quoted 3 lines
No, he doesn't. He needs a register that is guaranteed to keep it''s values across a processor reset.
With Kirkwood, the only way to implement it is with flash assist
There is not a single register in the whole CPU and all the peripherals it implements that keeps it's value over a reset? I'd
really be surprised if that was indeed true.
Could you please check again? Maybe ask the chip designers?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are two ways to write error-free programs. Only the third one works.