Skip to contentSkip to conversation

Ask a question related Assemble and C revert within vmlinux ?

DISCUSSION peter meng 3 participants 3 messages Jul 9, 2009

lore
Share & tools
lore

peter meng

author
#0 lore raw

Hi

I compile the linux kernel with mips .
Is there any tools let the Assemble code correspond to C code ? I mean Assemble line correspond to C line .

----------------cut from objdump -S vmlinux ---------------------- 801b5b40 <ip_rcv>:

801b5b40:       27bdffc0        addiu   sp,sp,-64
801b5b44:       afb00028        sw      s0,40(sp)
801b5b48:       afbf0038        sw      ra,56(sp)
801b5b4c:       afb30034        sw      s3,52(sp)
801b5b50:       afb20030        sw      s2,48(sp)
801b5b54:       afb1002c        sw      s1,44(sp)
801b5b58:       8c82006c        lw      v0,108(a0)
801b5b5c:       3c0300e0        lui     v1,0xe0
801b5b60:       3c050060        lui     a1,0x60
801b5b64:       00431024        and     v0,v0,v1
801b5b68:       10450022        beq     v0,a1,801b5bf4 <ip_rcv+0xb4>
801b5b6c:       00808021        move    s0,a0
801b5b70:       3c128029        lui     s2,0x8029
801b5b74:       8e42ef90        lw      v0,-4208(s2)
801b5b78:       00808821        move    s1,a0
801b5b7c:       8c430004        lw      v1,4(v0)
801b5b80:       24630001        addiu   v1,v1,1
801b5b84:       ac430004        sw      v1,4(v0)
801b5b88:       8c850078        lw      a1,120(a0)
801b5b8c:       38a50001        xori    a1,a1,0x1
801b5b90:       14a00027        bnez    a1,801b5c30 <ip_rcv+0xf0>
801b5b94:       00000000        nop
801b5b98:       122000d6        beqz    s1,801b5ef4 <ip_rcv+0x3b4>
801b5b9c:       02208021        move    s0,s1
801b5ba0:       8e250058        lw      a1,88(s1)

........
----------------------ip_rcv source code ---------------

int ip_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)

{
	struct iphdr *iph;
	u32 len;

	/* When the interface is in promisc. mode, drop all the crap
	 * that it receives, do not try to analyse it.
	 */
	if (skb->pkt_type == PACKET_OTHERHOST)
		goto drop;

	IP_INC_STATS_BH(IPSTATS_MIB_INRECEIVES);

	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
		IP_INC_STATS_BH(IPSTATS_MIB_INDISCARDS);
		goto out;
	}

	if (!pskb_may_pull(skb, sizeof(struct iphdr)))
		goto inhdr_error;

	iph = skb->nh.iph;


	if (iph->ihl < 5 || iph->version != 4)
		goto inhdr_error;

	if (!pskb_may_pull(skb, iph->ihl*4))
		goto inhdr_error;

	iph = skb->nh.iph;

.............

Thanks a lot .
Best Regards.
Peter Meng

#1 lore raw
Quoted 5 lines · peter meng

Hi

I compile the linux kernel with mips .
Is there any tools let the Assemble code correspond to C code ? I mean Assemble line correspond to C line .

Look up you C compiler's command line options. There should be several to generate listings, with either assembly or mixed assembly and C.

Or if your tool chain has the objdump utility, objdump also has options to disassemble, and possibly intermix source code lines.

Amicalement,

Signature · 1 line
Albert.
#2 lore raw
In reply to peter meng
Quoted 6 lines · peter meng

Hi

I compile the linux kernel with mips .
Is there any tools let the Assemble code correspond to C code ? I mean Assemble line correspond to C line .

not sure about mips, but for x86:
objdump -S ./ex.o

you need to have debug info compiled in..

jirka

Quoted 79 lines

----------------cut from objdump -S vmlinux ---------------------- 801b5b40 <ip_rcv>:

801b5b40:       27bdffc0        addiu   sp,sp,-64
801b5b44:       afb00028        sw      s0,40(sp)
801b5b48:       afbf0038        sw      ra,56(sp)
801b5b4c:       afb30034        sw      s3,52(sp)
801b5b50:       afb20030        sw      s2,48(sp)
801b5b54:       afb1002c        sw      s1,44(sp)
801b5b58:       8c82006c        lw      v0,108(a0)
801b5b5c:       3c0300e0        lui     v1,0xe0
801b5b60:       3c050060        lui     a1,0x60
801b5b64:       00431024        and     v0,v0,v1
801b5b68:       10450022        beq     v0,a1,801b5bf4 <ip_rcv+0xb4>
801b5b6c:       00808021        move    s0,a0
801b5b70:       3c128029        lui     s2,0x8029
801b5b74:       8e42ef90        lw      v0,-4208(s2)
801b5b78:       00808821        move    s1,a0
801b5b7c:       8c430004        lw      v1,4(v0)
801b5b80:       24630001        addiu   v1,v1,1
801b5b84:       ac430004        sw      v1,4(v0)
801b5b88:       8c850078        lw      a1,120(a0)
801b5b8c:       38a50001        xori    a1,a1,0x1
801b5b90:       14a00027        bnez    a1,801b5c30 <ip_rcv+0xf0>
801b5b94:       00000000        nop
801b5b98:       122000d6        beqz    s1,801b5ef4 <ip_rcv+0x3b4>
801b5b9c:       02208021        move    s0,s1
801b5ba0:       8e250058        lw      a1,88(s1)

........
----------------------ip_rcv source code ---------------

int ip_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)

{
	struct iphdr *iph;
	u32 len;

	/* When the interface is in promisc. mode, drop all the crap
	 * that it receives, do not try to analyse it.
	 */
	if (skb->pkt_type == PACKET_OTHERHOST)
		goto drop;

	IP_INC_STATS_BH(IPSTATS_MIB_INRECEIVES);

	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
		IP_INC_STATS_BH(IPSTATS_MIB_INDISCARDS);
		goto out;
	}

	if (!pskb_may_pull(skb, sizeof(struct iphdr)))
		goto inhdr_error;

	iph = skb->nh.iph;


	if (iph->ihl < 5 || iph->version != 4)
		goto inhdr_error;

	if (!pskb_may_pull(skb, iph->ihl*4))
		goto inhdr_error;

	iph = skb->nh.iph;

.............

Thanks a lot .
Best Regards.
Peter Meng

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/