xpedite5200, 5370: Use buffered NOR flash writes
PATCH 1/3 xpedite5200, 5370: Use buffered NOR flash writes
From: Peter Tyser <[email protected]>
Buffered writes are possible on the XPedite5200 and XPedite5370 and greatly improve NOR flash write speeds
---
I miscalculated the merge window close time... I hope to slip these last 3 trivial changes in the upcoming release if possible.
Thanks,
Peter
include/configs/XPEDITE5200.h | 1 + include/configs/XPEDITE5370.h | 1 + 2 files changed, 2 insertions(+), 0 deletions(-)
include/configs/XPEDITE5200.h +1 -0
@@ -129,6 +129,7 @@#define CONFIG_SYS_FLASH_WRITE_TOUT 500/* Flash Write Timeout (ms) */ #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \ {0xfbf40000, 0xc0000} }#define CONFIG_SYS_MONITOR_BASE TEXT_BASE/* start of monitor */
include/configs/XPEDITE5370.h +1 -0
@@ -137,6 +137,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);#define CONFIG_SYS_FLASH_WRITE_TOUT 500/* Flash Write Timeout (ms) */ #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \ {0xf7f40000, 0xc0000} }#define CONFIG_SYS_MONITOR_BASE TEXT_BASE/* start of monitor */
Signature · 1 line
1.6.2-rc2.GIT
PATCH 2/3 xpedite5370: Fix I2C GPIO initialization typo
From: Peter Tyser <[email protected]>
--- board/xes/xpedite5370/xpedite5370.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
board/xes/xpedite5370/xpedite5370.c +2 -2
@@ -84,8 +84,8 @@ int board_early_init_r(void)/* Initialize PCA9557 devices */ pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR0 ,0xff ,0 );pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR1 ,0xff ,0 ); -pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR0 ,0xff ,0 ); -pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR0 ,0xff ,0 ); +pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR2 ,0xff ,0 ); +pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR3 ,0xff ,0 );/* * Remap NOR flash region to caching-inhibited
Signature · 1 line
1.6.2-rc2.GIT
PATCH 3/3 Remove last remanants of unused CONFIG_I2C_CMD_TREE
From: Peter Tyser <[email protected]>
--- include/configs/P2020DS.h | 1 - include/configs/XPEDITE5170.h | 1 - include/configs/aria.h | 1 - include/configs/mecp5123.h | 1 - 4 files changed, 0 insertions(+), 4 deletions(-)
include/configs/P2020DS.h +0 -1
@@ -412,7 +412,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);#define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C/* I2C bit-banged */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000/* I2C speed and slave address */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57#define CONFIG_SYS_I2C_SLAVE 0x7F
include/configs/XPEDITE5170.h +0 -1
@@ -254,7 +254,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_I2C_OFFSET 0x3000#define CONFIG_SYS_I2C2_OFFSET 0x3100#define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE /* PEX8518 slave I2C interface */ #define CONFIG_SYS_I2C_PEX8518_ADDR 0x70
include/configs/aria.h +0 -1
@@ -376,7 +376,6 @@#define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C/* so disable bit-banged I2C */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SPEED 100000
include/configs/mecp5123.h +0 -1
@@ -249,7 +249,6 @@#define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C/* so disable bit-banged I2C */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000/* I2C speed */ #define CONFIG_SYS_I2C_SLAVE 0x7F/* slave address */
Signature · 1 line
1.6.2-rc2.GIT
PATCH 3/3 Remove last remanants of unused CONFIG_I2C_CMD_TREE
Hello Peter,
Quoted 9 lines · ptyser at xes-inc.com
From: Peter Tyser <[email protected]>
Signed-off-by Peter Tyser <[email protected]>--- include/configs/P2020DS.h | 1 - include/configs/XPEDITE5170.h | 1 - include/configs/aria.h | 1 - include/configs/mecp5123.h | 1 - 4 files changed, 0 insertions(+), 4 deletions(-)
added to u-boot-i2c.git
Thanks!
bye
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 2/3 xpedite5370: Fix I2C GPIO initialization typo
In reply to ptyser at xes-inc.comHello Peter,
Quoted 12 lines · ptyser at xes-inc.com
From: Peter Tyser <[email protected]>
Signed-off-by Peter Tyser <[email protected]>--- board/xes/xpedite5370/xpedite5370.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)board/xes/xpedite5370/xpedite5370.c +0
-0
board/xes/xpedite5370/xpedite5370.c int board_early_init_r(void) · line 91
Quoted 10 lines
board/xes/xpedite5370/xpedite5370.c +2
-2@@ -84,8 +84,8 @@ int board_early_init_r(void)/* Initialize PCA9557 devices */ pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR0 ,0xff ,0 );pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR1 ,0xff ,0 ); -pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR0 ,0xff ,0 ); -pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR0 ,0xff ,0 ); +pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR2 ,0xff ,0 ); +pca953x_set_pol (CONFIG_SYS_I2C_PCA953X_ADDR3 ,0xff ,0 );/* * Remap NOR flash region to caching-inhibited
This go through the mpc85xx maintainer, so you get my
bye
Heiko
Kumar Gala
AppliedPATCH 2/3 xpedite5370: Fix I2C GPIO initialization typo
In reply to ptyser at xes-inc.comQuoted 6 lines · ptyser at xes-inc.com
From: Peter Tyser <[email protected]>
Signed-off-by Peter Tyser <[email protected]>---
board/xes/xpedite5370/xpedite5370.c| 4 ++--1 files changed, 2 insertions(+), 2 deletions(-)
applied
- k
Kumar Gala
AppliedPATCH 1/3 xpedite5200, 5370: Use buffered NOR flash writes
In reply to ptyser at xes-inc.comQuoted 6 lines · ptyser at xes-inc.com
From: Peter Tyser <[email protected]>
Buffered writes are possible on the XPedite5200 and XPedite5370 and greatly
improve NOR flash write speeds
Quoted 8 lines
Signed-off-by Peter Tyser <[email protected]>---
I miscalculated the merge window close time... I hope to slip these last 3
trivial changes in the upcoming release if possible.Thanks,
Peter
applied
- k