Skip to contentSkip to conversation

tsc2007: IRQ balancing when stopping work during removal

PATCH In review Richard Röjfors 1 participant 1 message Jul 24, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 tsc2007: IRQ balancing when stopping work during removal

The implementation is proposed by Dmitry Torokhov, I have just made some changes so it applied to my previous patches, and I tried it out.

The idea is to balance the IRQ:s in the case where the poll worker is running, so it won't get disabled twice.

Also using __devinit/__devexit macros on probe/remove functions.

---

drivers/input/touchscreen/tsc2007.c +23 -17
Index: linux-2.6.31-rc2/drivers/input/touchscreen/tsc2007.c
===================================================================
@@ -61,7 +61,7 @@
 
 #define PEN_STATE_UP	0x00
 #define PEN_STATE_DOWN	0x01
-#define PEN_STATE_IRQ	0x01
+#define PEN_STATE_IRQ	0x02
 
 struct ts_event {
 	u16	x;
@@ -141,8 +141,6 @@
 	 */
 	if (rt > MAX_12BIT) {
 		dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
-
-		schedule_delayed_work(&ts->work, TS_POLL_PERIOD);
 		return;
 	}
 
@@ -178,8 +176,6 @@
 	} else if (!ts->get_pendown_state)
 		/* no callback to check pendown state, use pressure */
 		ts->penstate = PEN_STATE_UP;
-
-	schedule_delayed_work(&ts->work, TS_POLL_PERIOD);
 }
 
 static int tsc2007_read_values(struct tsc2007 *tsc)
@@ -228,6 +224,7 @@
 
 		tsc2007_read_values(ts);
 		tsc2007_send_event(ts);
+		schedule_delayed_work(&ts->work, TS_POLL_PERIOD);
 	}
 }
 
@@ -238,7 +235,7 @@
 	if (!ts->get_pendown_state || likely(ts->get_pendown_state())) {
 		disable_irq_nosync(ts->irq);
 		ts->penstate = PEN_STATE_IRQ;
-		schedule_delayed_work(&ts->work, 0);
+		schedule_delayed_work(&ts->work, TS_POLL_PERIOD);
 	}
 
 	if (ts->clear_penirq)
@@ -247,15 +244,25 @@
 	return IRQ_HANDLED;
 }
 
-static int tsc2007_probe(struct i2c_client *client,
+static void tsc2007_free_irq(struct tsc2007 *ts)
+{
+	free_irq(ts->irq, ts);
+	if (cancel_delayed_work_sync(&ts->work))
+		/* Work was pending, therefore we need to enable IRQ here to
+		 * balance the disable done in the interrupt handler.
+		 */
+		enable_irq(ts->irq);
+}
+
+static int __devinit tsc2007_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct tsc2007 *ts;
-	struct tsc2007_platform_data *pdata = pdata = client->dev.platform_data;
+	struct tsc2007_platform_data *pdata = client->dev.platform_data;
 	struct input_dev *input_dev;
 	int err;
 
-	if (!pdata || !pdata->get_pendown_state) {
+	if (!pdata) {
 		dev_err(&client->dev, "platform data is required!\n");
 		return -EINVAL;
 	}
@@ -320,25 +327,24 @@
 	return 0;
 
  err_free_irq:
-	free_irq(ts->irq, ts);
+	tsc2007_free_irq(ts);
  err_free_mem:
+	if (pdata->exit_platform_hw)
+		pdata->exit_platform_hw();
 	input_free_device(input_dev);
 	kfree(ts);
 	return err;
 }
 
-static int tsc2007_remove(struct i2c_client *client)
+static int __devexit tsc2007_remove(struct i2c_client *client)
 {
 	struct tsc2007	*ts = i2c_get_clientdata(client);
-	struct tsc2007_platform_data *pdata;
+	struct tsc2007_platform_data *pdata = client->dev.platform_data;
 
-	cancel_delayed_work_sync(&ts->work);
-
-	pdata = client->dev.platform_data;
+	tsc2007_free_irq(ts);
 	if (pdata->exit_platform_hw)
 		pdata->exit_platform_hw();
 
-	free_irq(ts->irq, ts);
 	input_unregister_device(ts->input);
 	kfree(ts);
 
@@ -359,7 +365,7 @@
 	},
 	.id_table	= tsc2007_idtable,
 	.probe		= tsc2007_probe,
-	.remove		= tsc2007_remove,
+	.remove		= __devexit_p(tsc2007_remove),
 };
 
 static int __init tsc2007_init(void)

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html