Add LCD support to MIMC200 board
PATCH 1/1 Add LCD support to MIMC200 board
This patch updates the MIMC200 files to enable the LCD.
Signed-off-by Mark Jackson <[email protected]>
--- board/mimc/mimc200/mimc200.c | 34 ++++++++++++++++++++++++++++++++++ include/configs/mimc200.h | 16 ++++++++++++++++ 2 files changed, 50 insertions(+), 0 deletions(-)
board/mimc/mimc200/mimc200.c +34 -0
@@ -28,10 +28,40 @@#include <asm/arch/gpio.h> #include <asm/arch/hmatrix.h> #include <asm/arch/portmux.h> +#include <atmel_lcdc.h> #include <lcd.h> #include "../../../cpu/at32ap/hsmc3.h" +#if defined(CONFIG_LCD ) +/* 480x272x16 @ 72 Hz */ +vidinfo_t panel_info = { + .vl_col =480 ,/* Number of columns */ + .vl_row =272 ,/* Number of rows */ + .vl_clk =10000000 ,/* pixel clock in ps */ + .vl_sync =ATMEL_LCDC_INVCLK_INVERTED | +ATMEL_LCDC_INVLINE_INVERTED | +ATMEL_LCDC_INVFRAME_INVERTED , + .vl_bpix =LCD_COLOR16 ,/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ + .vl_tft =1 ,/* 0 = passive, 1 = TFT */ + .vl_hsync_len =42 ,/* Length of horizontal sync */ + .vl_left_margin =1 ,/* Time from sync to picture */ + .vl_right_margin =1 ,/* Time from picture to sync */ + .vl_vsync_len =1 ,/* Length of vertical sync */ + .vl_upper_margin =12 ,/* Time from sync to picture */ + .vl_lower_margin =1 ,/* Time from picture to sync */ + .mmio =LCDC_BASE ,/* Memory mapped registers */ +}; + +void lcd_enable (void ) +{ +} + +void lcd_disable (void ) +{ +} +#endif +DECLARE_GLOBAL_DATA_PTR ;static const struct sdram_config sdram_config = {
@@ -110,6 +140,10 @@ int board_early_init_f(void)portmux_enable_mmci (0 ,PORTMUX_MMCI_4BIT ,PORTMUX_DRIVE_LOW );#endif +#if defined(CONFIG_LCD ) +portmux_enable_lcdc (1 ); +#endif +return 0 ; }
include/configs/mimc200.h +16 -0
@@ -82,6 +82,8 @@#define CONFIG_DISABLE_CONSOLE 1/* disable console */ #define CONFIG_SYS_DEVICE_NULLDEV 1/* include nulldev device */ +#define CONFIG_LCD 1 +/* * Only interrupt autoboot if <space> is pressed. Otherwise, garbage * data on the serial line may interrupt the boot sequence.
@@ -127,6 +129,20 @@#define CONFIG_MMC 1#define CONFIG_ATMEL_MCI 1 +#if defined(CONFIG_LCD ) +#define CONFIG_CMD_BMP +#define CONFIG_ATMEL_LCD 1 +#define LCD_BPP LCD_COLOR16 +#define CONFIG_BMP_16BPP 1 +#define CONFIG_FB_ADDR 0x10600000 +#define CONFIG_WHITE_ON_BLACK 1 +#define CONFIG_VIDEO_BMP_GZIP 1 +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE 262144 +#define CONFIG_ATMEL_LCD_BGR555 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +#define CONFIG_SPLASH_SCREEN 1 +#endif +#define CONFIG_SYS_DCACHE_LINESZ 32#define CONFIG_SYS_ICACHE_LINESZ 32
PATCH 1/1 Add LCD support to MIMC200 board
Quoted 7 lines · Mark Jackson
This patch updates the MIMC200 files to enable the LCD.
Signed-off-by Mark Jackson <[email protected]>--- board/mimc/mimc200/mimc200.c | 34 ++++++++++++++++++++++++++++++++++ include/configs/mimc200.h | 16 ++++++++++++++++ 2 files changed, 50 insertions(+), 0 deletions(-)
Applied to u-boot-video. Thanks!
Best regards,
Anatolij