Skip to contentSkip to conversation

b43: Typo fixes & minor cleanup

PATCH New Gábor Stefanik 1 participant 1 message Aug 4, 2009 Networking drivers (wireless)

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 b43: Typo fixes & minor cleanup

Make use of HostFlags defines in the LP-PHY code.
Fix fallout from the IEEE80211_IF_TYPE to NL80211_IFTYPE change.

---
v2: Drop incorrect hunk.

drivers/net/wireless/b43/b43.h    |    2 +-
drivers/net/wireless/b43/phy_lp.c |    2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/b43/b43.h +0 -0
index 41ca727..52fd6d6 100644
@@ -627,7 +627,7 @@ struct b43_wl {
	u8 mac_addr[ETH_ALEN];
	/* Current BSSID */
	u8 bssid[ETH_ALEN];
-	/* Interface type. (IEEE80211_IF_TYPE_XXX) */
+	/* Interface type. (NL80211_IFTYPE_XXX) */
	int if_type;
	/* Is the card operating in AP, STA or IBSS mode? */
	bool operating;
drivers/net/wireless/b43/phy_lp.c +0 -0
index 5d50943..03a9b50 100644
@@ -130,7 +130,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
		b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x0006);
		b43_phy_write(dev, B43_LPPHY_GPIO_SELECT, 0x0005);
		b43_phy_write(dev, B43_LPPHY_GPIO_OUTEN, 0xFFFF);
-		b43_hf_write(dev, b43_hf_read(dev) | 0x0800ULL << 32);
+		b43_hf_write(dev, b43_hf_read(dev) | B43_HF_PR45960W);
	}
	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
		b43_phy_set(dev, B43_LPPHY_LP_PHY_CTL, 0x8000);
Signature · 1 line
1.6.2.4