Skip to contentSkip to conversation

ARM: Davinci DM355: Enabling DM9000 on DM355 EVM

PATCH New s-paulraj at ti.com 2 participants 2 messages Aug 10, 2009

lore
Share & tools
lore

s-paulraj at ti.com

author
#0 lore raw

PATCH 1/1 ARM: Davinci DM355: Enabling DM9000 on DM355 EVM

From: Sandeep Paulraj <[email protected]>

Due to recent changes to the NET support on U-boot, DM9000 is no longer detected on the DM355 EVM.
This minor update enables DM9000 on the DM355 EVM. Tested on the DM355 EVM

Signed-off-by Sandeep Paulraj <[email protected]>
---
 board/davinci/dm355evm/dm355evm.c |   10 +++++++++-
 1 files changed, 9 insertions(+), 1 deletions(-)
board/davinci/dm355evm/dm355evm.c +9 -1
index 398f527..0a44748 100644
@@ -23,7 +23,8 @@
 #include <asm/arch/emif_defs.h>
 #include <asm/arch/nand_defs.h>
 #include "../common/misc.h"
-
+#include <net.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 

@@ -79,6 +80,13 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+	return dm9000_initialize(bis);
+}
+#endif
+
 #ifdef CONFIG_NAND_DAVINCI
 
 static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip)
Signature · 1 line
1.6.0.4
Applied
#1 lore raw

PATCH 1/1 ARM: Davinci DM355: Enabling DM9000 on DM355 EVM

Sandeep,

Quoted 9 lines · s-paulraj at ti.com

From: Sandeep Paulraj <[email protected]>

Due to recent changes to the NET support on U-boot, DM9000 is no longer detected on the DM355 EVM.
This minor update enables DM9000 on the DM355 EVM. Tested on the DM355 EVM

Signed-off-by Sandeep Paulraj <[email protected]>

---

applied to net repo.

thanks,
Ben