Skip to contentSkip to conversation

Pinnacle Hybrid Pro Stick (320e)?

DISCUSSION Németh Márton 3 participants 10 messages Aug 23, 2009 – Aug 30, 2009 Media (V4L/DVB)

lore
Share & tools
lore

Németh Márton

author
#0 lore raw

Hi,

I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':

[  144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
[  144.556371] usb 3-3: configuration #1 chosen from 1 choice
[  145.598079] Linux video capture interface: v2.00
[  145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[  145.742186] em28xx #0: chip ID is em2882/em2883
[  145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[  145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[  145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[  145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[  145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[  145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[  145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[  145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
[  145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
[  145.823334] em28xx #0: EEPROM info:
[  145.823336] em28xx #0:       AC97 audio (5 sample rates)
[  145.823340] em28xx #0:       USB Remote wakeup capable
[  145.823342] em28xx #0:       500mA max power
[  145.823346] em28xx #0:       Table at 0x04, strings=0x206a, 0x006a, 0x0000
[  145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[  145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
[  145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[  145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[  145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[  145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[  145.880355] em28xx #0: Please send an email with this log to:
[  145.880358] em28xx #0:       V4L Mailing List <[email protected]>
[  145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
[  145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
[  145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[  145.880372] em28xx #0:     card=0 -> Unknown EM2800 video grabber
[  145.880375] em28xx #0:     card=1 -> Unknown EM2750/28xx video grabber
[  145.880379] em28xx #0:     card=2 -> Terratec Cinergy 250 USB
[  145.880382] em28xx #0:     card=3 -> Pinnacle PCTV USB 2
[  145.880385] em28xx #0:     card=4 -> Hauppauge WinTV USB 2
[  145.880389] em28xx #0:     card=5 -> MSI VOX USB 2.0
[  145.880392] em28xx #0:     card=6 -> Terratec Cinergy 200 USB
[  145.880395] em28xx #0:     card=7 -> Leadtek Winfast USB II
[  145.880398] em28xx #0:     card=8 -> Kworld USB2800
[  145.880401] em28xx #0:     card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
[  145.880405] em28xx #0:     card=10 -> Hauppauge WinTV HVR 900
[  145.880409] em28xx #0:     card=11 -> Terratec Hybrid XS
[  145.880412] em28xx #0:     card=12 -> Kworld PVR TV 2800 RF
[  145.880415] em28xx #0:     card=13 -> Terratec Prodigy XS
[  145.880419] em28xx #0:     card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[  145.880422] em28xx #0:     card=15 -> V-Gear PocketTV
[  145.880426] em28xx #0:     card=16 -> Hauppauge WinTV HVR 950
[  145.880429] em28xx #0:     card=17 -> Pinnacle PCTV HD Pro Stick
[  145.880432] em28xx #0:     card=18 -> Hauppauge WinTV HVR 900 (R2)
[  145.880436] em28xx #0:     card=19 -> EM2860/SAA711X Reference Design
[  145.880439] em28xx #0:     card=20 -> AMD ATI TV Wonder HD 600
[  145.880442] em28xx #0:     card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[  145.880446] em28xx #0:     card=22 -> EM2710/EM2750/EM2751 webcam grabber
[  145.880450] em28xx #0:     card=23 -> Huaqi DLCW-130
[  145.880453] em28xx #0:     card=24 -> D-Link DUB-T210 TV Tuner
[  145.880456] em28xx #0:     card=25 -> Gadmei UTV310
[  145.880459] em28xx #0:     card=26 -> Hercules Smart TV USB 2.0
[  145.880462] em28xx #0:     card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[  145.880466] em28xx #0:     card=28 -> Leadtek Winfast USB II Deluxe
[  145.880470] em28xx #0:     card=29 -> <NULL>
[  145.880472] em28xx #0:     card=30 -> Videology 20K14XUSB USB2.0
[  145.880476] em28xx #0:     card=31 -> Usbgear VD204v9
[  145.880479] em28xx #0:     card=32 -> Supercomp USB 2.0 TV
[  145.880482] em28xx #0:     card=33 -> <NULL>
[  145.880485] em28xx #0:     card=34 -> Terratec Cinergy A Hybrid XS
[  145.880488] em28xx #0:     card=35 -> Typhoon DVD Maker
[  145.880492] em28xx #0:     card=36 -> NetGMBH Cam
[  145.880495] em28xx #0:     card=37 -> Gadmei UTV330
[  145.880498] em28xx #0:     card=38 -> Yakumo MovieMixer
[  145.880501] em28xx #0:     card=39 -> KWorld PVRTV 300U
[  145.880504] em28xx #0:     card=40 -> Plextor ConvertX PX-TV100U
[  145.880508] em28xx #0:     card=41 -> Kworld 350 U DVB-T
[  145.880511] em28xx #0:     card=42 -> Kworld 355 U DVB-T
[  145.880514] em28xx #0:     card=43 -> Terratec Cinergy T XS
[  145.880517] em28xx #0:     card=44 -> Terratec Cinergy T XS (MT2060)
[  145.880521] em28xx #0:     card=45 -> Pinnacle PCTV DVB-T
[  145.880524] em28xx #0:     card=46 -> Compro, VideoMate U3
[  145.880528] em28xx #0:     card=47 -> KWorld DVB-T 305U
[  145.880531] em28xx #0:     card=48 -> KWorld DVB-T 310U
[  145.880534] em28xx #0:     card=49 -> MSI DigiVox A/D
[  145.880537] em28xx #0:     card=50 -> MSI DigiVox A/D II
[  145.880540] em28xx #0:     card=51 -> Terratec Hybrid XS Secam
[  145.880543] em28xx #0:     card=52 -> DNT DA2 Hybrid
[  145.880547] em28xx #0:     card=53 -> Pinnacle Hybrid Pro
[  145.880550] em28xx #0:     card=54 -> Kworld VS-DVB-T 323UR
[  145.880554] em28xx #0:     card=55 -> Terratec Hybrid XS (em2882)
[  145.880557] em28xx #0:     card=56 -> Pinnacle Hybrid Pro (2)
[  145.880560] em28xx #0:     card=57 -> Kworld PlusTV HD Hybrid 330
[  145.880564] em28xx #0:     card=58 -> Compro VideoMate ForYou/Stereo
[  145.880567] em28xx #0:     card=59 -> <NULL>
[  145.880570] em28xx #0:     card=60 -> Hauppauge WinTV HVR 850
[  145.880573] em28xx #0:     card=61 -> Pixelview PlayTV Box 4 USB 2.0
[  145.880577] em28xx #0:     card=62 -> Gadmei TVR200
[  145.880580] em28xx #0:     card=63 -> Kaiomy TVnPC U2
[  145.880583] em28xx #0:     card=64 -> Easy Cap Capture DC-60
[  145.880586] em28xx #0:     card=65 -> IO-DATA GV-MVP/SZ
[  145.880590] em28xx #0:     card=66 -> Empire dual TV
[  145.880593] em28xx #0:     card=67 -> Terratec Grabby
[  145.880596] em28xx #0:     card=68 -> Terratec AV350
[  145.880599] em28xx #0:     card=69 -> KWorld ATSC 315U HDTV TV Box
[  145.880602] em28xx #0:     card=70 -> Evga inDtube
[  145.880605] em28xx #0:     card=71 -> Silvercrest Webcam 1.3mpix
[  145.880716] em28xx #0: Config register raw data: 0x58
[  145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
[  145.890963] em28xx #0: AC97 features = 0x3eb0
[  145.890966] em28xx #0: Unknown AC97 audio processor detected!
[  145.922320] em28xx #0: v4l2 driver version 0.1.2
[  145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[  146.027706] usbcore: registered new interface driver em28xx
[  146.027787] em28xx driver loaded
[  146.062766] usbcore: registered new interface driver snd-usb-audio

This device was working with 2.6.28 together with the out-of-tree driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").

What has to be done in order this device can work with the newest Linux kernel?

Regards,

Márton Németh

#1 lore raw

Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton:

Quoted 125 lines

Hi,

I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':

[  144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
[  144.556371] usb 3-3: configuration #1 chosen from 1 choice
[  145.598079] Linux video capture interface: v2.00
[  145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[  145.742186] em28xx #0: chip ID is em2882/em2883
[  145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[  145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[  145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[  145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[  145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[  145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[  145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[  145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
[  145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
[  145.823334] em28xx #0: EEPROM info:
[  145.823336] em28xx #0:       AC97 audio (5 sample rates)
[  145.823340] em28xx #0:       USB Remote wakeup capable
[  145.823342] em28xx #0:       500mA max power
[  145.823346] em28xx #0:       Table at 0x04, strings=0x206a, 0x006a, 0x0000
[  145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[  145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
[  145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[  145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[  145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[  145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[  145.880355] em28xx #0: Please send an email with this log to:
[  145.880358] em28xx #0:       V4L Mailing List <[email protected]>
[  145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
[  145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
[  145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[  145.880372] em28xx #0:     card=0 -> Unknown EM2800 video grabber
[  145.880375] em28xx #0:     card=1 -> Unknown EM2750/28xx video grabber
[  145.880379] em28xx #0:     card=2 -> Terratec Cinergy 250 USB
[  145.880382] em28xx #0:     card=3 -> Pinnacle PCTV USB 2
[  145.880385] em28xx #0:     card=4 -> Hauppauge WinTV USB 2
[  145.880389] em28xx #0:     card=5 -> MSI VOX USB 2.0
[  145.880392] em28xx #0:     card=6 -> Terratec Cinergy 200 USB
[  145.880395] em28xx #0:     card=7 -> Leadtek Winfast USB II
[  145.880398] em28xx #0:     card=8 -> Kworld USB2800
[  145.880401] em28xx #0:     card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
[  145.880405] em28xx #0:     card=10 -> Hauppauge WinTV HVR 900
[  145.880409] em28xx #0:     card=11 -> Terratec Hybrid XS
[  145.880412] em28xx #0:     card=12 -> Kworld PVR TV 2800 RF
[  145.880415] em28xx #0:     card=13 -> Terratec Prodigy XS
[  145.880419] em28xx #0:     card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[  145.880422] em28xx #0:     card=15 -> V-Gear PocketTV
[  145.880426] em28xx #0:     card=16 -> Hauppauge WinTV HVR 950
[  145.880429] em28xx #0:     card=17 -> Pinnacle PCTV HD Pro Stick
[  145.880432] em28xx #0:     card=18 -> Hauppauge WinTV HVR 900 (R2)
[  145.880436] em28xx #0:     card=19 -> EM2860/SAA711X Reference Design
[  145.880439] em28xx #0:     card=20 -> AMD ATI TV Wonder HD 600
[  145.880442] em28xx #0:     card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[  145.880446] em28xx #0:     card=22 -> EM2710/EM2750/EM2751 webcam grabber
[  145.880450] em28xx #0:     card=23 -> Huaqi DLCW-130
[  145.880453] em28xx #0:     card=24 -> D-Link DUB-T210 TV Tuner
[  145.880456] em28xx #0:     card=25 -> Gadmei UTV310
[  145.880459] em28xx #0:     card=26 -> Hercules Smart TV USB 2.0
[  145.880462] em28xx #0:     card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[  145.880466] em28xx #0:     card=28 -> Leadtek Winfast USB II Deluxe
[  145.880470] em28xx #0:     card=29 -> <NULL>
[  145.880472] em28xx #0:     card=30 -> Videology 20K14XUSB USB2.0
[  145.880476] em28xx #0:     card=31 -> Usbgear VD204v9
[  145.880479] em28xx #0:     card=32 -> Supercomp USB 2.0 TV
[  145.880482] em28xx #0:     card=33 -> <NULL>
[  145.880485] em28xx #0:     card=34 -> Terratec Cinergy A Hybrid XS
[  145.880488] em28xx #0:     card=35 -> Typhoon DVD Maker
[  145.880492] em28xx #0:     card=36 -> NetGMBH Cam
[  145.880495] em28xx #0:     card=37 -> Gadmei UTV330
[  145.880498] em28xx #0:     card=38 -> Yakumo MovieMixer
[  145.880501] em28xx #0:     card=39 -> KWorld PVRTV 300U
[  145.880504] em28xx #0:     card=40 -> Plextor ConvertX PX-TV100U
[  145.880508] em28xx #0:     card=41 -> Kworld 350 U DVB-T
[  145.880511] em28xx #0:     card=42 -> Kworld 355 U DVB-T
[  145.880514] em28xx #0:     card=43 -> Terratec Cinergy T XS
[  145.880517] em28xx #0:     card=44 -> Terratec Cinergy T XS (MT2060)
[  145.880521] em28xx #0:     card=45 -> Pinnacle PCTV DVB-T
[  145.880524] em28xx #0:     card=46 -> Compro, VideoMate U3
[  145.880528] em28xx #0:     card=47 -> KWorld DVB-T 305U
[  145.880531] em28xx #0:     card=48 -> KWorld DVB-T 310U
[  145.880534] em28xx #0:     card=49 -> MSI DigiVox A/D
[  145.880537] em28xx #0:     card=50 -> MSI DigiVox A/D II
[  145.880540] em28xx #0:     card=51 -> Terratec Hybrid XS Secam
[  145.880543] em28xx #0:     card=52 -> DNT DA2 Hybrid
[  145.880547] em28xx #0:     card=53 -> Pinnacle Hybrid Pro
[  145.880550] em28xx #0:     card=54 -> Kworld VS-DVB-T 323UR
[  145.880554] em28xx #0:     card=55 -> Terratec Hybrid XS (em2882)
[  145.880557] em28xx #0:     card=56 -> Pinnacle Hybrid Pro (2)
[  145.880560] em28xx #0:     card=57 -> Kworld PlusTV HD Hybrid 330
[  145.880564] em28xx #0:     card=58 -> Compro VideoMate ForYou/Stereo
[  145.880567] em28xx #0:     card=59 -> <NULL>
[  145.880570] em28xx #0:     card=60 -> Hauppauge WinTV HVR 850
[  145.880573] em28xx #0:     card=61 -> Pixelview PlayTV Box 4 USB 2.0
[  145.880577] em28xx #0:     card=62 -> Gadmei TVR200
[  145.880580] em28xx #0:     card=63 -> Kaiomy TVnPC U2
[  145.880583] em28xx #0:     card=64 -> Easy Cap Capture DC-60
[  145.880586] em28xx #0:     card=65 -> IO-DATA GV-MVP/SZ
[  145.880590] em28xx #0:     card=66 -> Empire dual TV
[  145.880593] em28xx #0:     card=67 -> Terratec Grabby
[  145.880596] em28xx #0:     card=68 -> Terratec AV350
[  145.880599] em28xx #0:     card=69 -> KWorld ATSC 315U HDTV TV Box
[  145.880602] em28xx #0:     card=70 -> Evga inDtube
[  145.880605] em28xx #0:     card=71 -> Silvercrest Webcam 1.3mpix
[  145.880716] em28xx #0: Config register raw data: 0x58
[  145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
[  145.890963] em28xx #0: AC97 features = 0x3eb0
[  145.890966] em28xx #0: Unknown AC97 audio processor detected!
[  145.922320] em28xx #0: v4l2 driver version 0.1.2
[  145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[  146.027706] usbcore: registered new interface driver em28xx
[  146.027787] em28xx driver loaded
[  146.062766] usbcore: registered new interface driver snd-usb-audio
Quoted 9 lines

This device was working with 2.6.28 together with the out-of-tree driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").

What has to be done in order this device can work with the newest Linux kernel?

Regards,

Márton Németh

never use trees deliberately out-of-tree?

Buy an expensive device from Markus with first class support and forget about all others ...

*

author
#2 lore raw
Quoted 129 lines · hermann pitton

Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton:

Quoted 128 lines

Hi,

I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':

[  144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
[  144.556371] usb 3-3: configuration #1 chosen from 1 choice
[  145.598079] Linux video capture interface: v2.00
[  145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[  145.742186] em28xx #0: chip ID is em2882/em2883
[  145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[  145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[  145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[  145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[  145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[  145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[  145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[  145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
[  145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
[  145.823334] em28xx #0: EEPROM info:
[  145.823336] em28xx #0:       AC97 audio (5 sample rates)
[  145.823340] em28xx #0:       USB Remote wakeup capable
[  145.823342] em28xx #0:       500mA max power
[  145.823346] em28xx #0:       Table at 0x04, strings=0x206a, 0x006a, 0x0000
[  145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[  145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
[  145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[  145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[  145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[  145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[  145.880355] em28xx #0: Please send an email with this log to:
[  145.880358] em28xx #0:       V4L Mailing List <[email protected]>
[  145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
[  145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
[  145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[  145.880372] em28xx #0:     card=0 -> Unknown EM2800 video grabber
[  145.880375] em28xx #0:     card=1 -> Unknown EM2750/28xx video grabber
[  145.880379] em28xx #0:     card=2 -> Terratec Cinergy 250 USB
[  145.880382] em28xx #0:     card=3 -> Pinnacle PCTV USB 2
[  145.880385] em28xx #0:     card=4 -> Hauppauge WinTV USB 2
[  145.880389] em28xx #0:     card=5 -> MSI VOX USB 2.0
[  145.880392] em28xx #0:     card=6 -> Terratec Cinergy 200 USB
[  145.880395] em28xx #0:     card=7 -> Leadtek Winfast USB II
[  145.880398] em28xx #0:     card=8 -> Kworld USB2800
[  145.880401] em28xx #0:     card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
[  145.880405] em28xx #0:     card=10 -> Hauppauge WinTV HVR 900
[  145.880409] em28xx #0:     card=11 -> Terratec Hybrid XS
[  145.880412] em28xx #0:     card=12 -> Kworld PVR TV 2800 RF
[  145.880415] em28xx #0:     card=13 -> Terratec Prodigy XS
[  145.880419] em28xx #0:     card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[  145.880422] em28xx #0:     card=15 -> V-Gear PocketTV
[  145.880426] em28xx #0:     card=16 -> Hauppauge WinTV HVR 950
[  145.880429] em28xx #0:     card=17 -> Pinnacle PCTV HD Pro Stick
[  145.880432] em28xx #0:     card=18 -> Hauppauge WinTV HVR 900 (R2)
[  145.880436] em28xx #0:     card=19 -> EM2860/SAA711X Reference Design
[  145.880439] em28xx #0:     card=20 -> AMD ATI TV Wonder HD 600
[  145.880442] em28xx #0:     card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[  145.880446] em28xx #0:     card=22 -> EM2710/EM2750/EM2751 webcam grabber
[  145.880450] em28xx #0:     card=23 -> Huaqi DLCW-130
[  145.880453] em28xx #0:     card=24 -> D-Link DUB-T210 TV Tuner
[  145.880456] em28xx #0:     card=25 -> Gadmei UTV310
[  145.880459] em28xx #0:     card=26 -> Hercules Smart TV USB 2.0
[  145.880462] em28xx #0:     card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[  145.880466] em28xx #0:     card=28 -> Leadtek Winfast USB II Deluxe
[  145.880470] em28xx #0:     card=29 -> <NULL>
[  145.880472] em28xx #0:     card=30 -> Videology 20K14XUSB USB2.0
[  145.880476] em28xx #0:     card=31 -> Usbgear VD204v9
[  145.880479] em28xx #0:     card=32 -> Supercomp USB 2.0 TV
[  145.880482] em28xx #0:     card=33 -> <NULL>
[  145.880485] em28xx #0:     card=34 -> Terratec Cinergy A Hybrid XS
[  145.880488] em28xx #0:     card=35 -> Typhoon DVD Maker
[  145.880492] em28xx #0:     card=36 -> NetGMBH Cam
[  145.880495] em28xx #0:     card=37 -> Gadmei UTV330
[  145.880498] em28xx #0:     card=38 -> Yakumo MovieMixer
[  145.880501] em28xx #0:     card=39 -> KWorld PVRTV 300U
[  145.880504] em28xx #0:     card=40 -> Plextor ConvertX PX-TV100U
[  145.880508] em28xx #0:     card=41 -> Kworld 350 U DVB-T
[  145.880511] em28xx #0:     card=42 -> Kworld 355 U DVB-T
[  145.880514] em28xx #0:     card=43 -> Terratec Cinergy T XS
[  145.880517] em28xx #0:     card=44 -> Terratec Cinergy T XS (MT2060)
[  145.880521] em28xx #0:     card=45 -> Pinnacle PCTV DVB-T
[  145.880524] em28xx #0:     card=46 -> Compro, VideoMate U3
[  145.880528] em28xx #0:     card=47 -> KWorld DVB-T 305U
[  145.880531] em28xx #0:     card=48 -> KWorld DVB-T 310U
[  145.880534] em28xx #0:     card=49 -> MSI DigiVox A/D
[  145.880537] em28xx #0:     card=50 -> MSI DigiVox A/D II
[  145.880540] em28xx #0:     card=51 -> Terratec Hybrid XS Secam
[  145.880543] em28xx #0:     card=52 -> DNT DA2 Hybrid
[  145.880547] em28xx #0:     card=53 -> Pinnacle Hybrid Pro
[  145.880550] em28xx #0:     card=54 -> Kworld VS-DVB-T 323UR
[  145.880554] em28xx #0:     card=55 -> Terratec Hybrid XS (em2882)
[  145.880557] em28xx #0:     card=56 -> Pinnacle Hybrid Pro (2)
[  145.880560] em28xx #0:     card=57 -> Kworld PlusTV HD Hybrid 330
[  145.880564] em28xx #0:     card=58 -> Compro VideoMate ForYou/Stereo
[  145.880567] em28xx #0:     card=59 -> <NULL>
[  145.880570] em28xx #0:     card=60 -> Hauppauge WinTV HVR 850
[  145.880573] em28xx #0:     card=61 -> Pixelview PlayTV Box 4 USB 2.0
[  145.880577] em28xx #0:     card=62 -> Gadmei TVR200
[  145.880580] em28xx #0:     card=63 -> Kaiomy TVnPC U2
[  145.880583] em28xx #0:     card=64 -> Easy Cap Capture DC-60
[  145.880586] em28xx #0:     card=65 -> IO-DATA GV-MVP/SZ
[  145.880590] em28xx #0:     card=66 -> Empire dual TV
[  145.880593] em28xx #0:     card=67 -> Terratec Grabby
[  145.880596] em28xx #0:     card=68 -> Terratec AV350
[  145.880599] em28xx #0:     card=69 -> KWorld ATSC 315U HDTV TV Box
[  145.880602] em28xx #0:     card=70 -> Evga inDtube
[  145.880605] em28xx #0:     card=71 -> Silvercrest Webcam 1.3mpix
[  145.880716] em28xx #0: Config register raw data: 0x58
[  145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
[  145.890963] em28xx #0: AC97 features = 0x3eb0
[  145.890966] em28xx #0: Unknown AC97 audio processor detected!
[  145.922320] em28xx #0: v4l2 driver version 0.1.2
[  145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[  146.027706] usbcore: registered new interface driver em28xx
[  146.027787] em28xx driver loaded
[  146.062766] usbcore: registered new interface driver snd-usb-audio

This device was working with 2.6.28 together with the out-of-tree driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").

Quoted 8 lines
Quoted 6 lines

What has to be done in order this device can work with the newest Linux kernel?

Regards,

Márton Németh

never use trees deliberately out-of-tree?

Maybe I was not clear enough in my description. Currently I am using 2.6.31-rc7 without any modification. This version contained the message that I should contact this mailing list (see at 145.880355).

Regards,

Márton Németh

#3 lore raw

Am Sonntag, den 23.08.2009, 15:14 +0200 schrieb Németh Márton:

Quoted 139 lines
Quoted 129 lines · hermann pitton

Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton:

Quoted 128 lines

Hi,

I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':

[  144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
[  144.556371] usb 3-3: configuration #1 chosen from 1 choice
[  145.598079] Linux video capture interface: v2.00
[  145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[  145.742186] em28xx #0: chip ID is em2882/em2883
[  145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[  145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[  145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[  145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[  145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[  145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[  145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[  145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
[  145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
[  145.823334] em28xx #0: EEPROM info:
[  145.823336] em28xx #0:       AC97 audio (5 sample rates)
[  145.823340] em28xx #0:       USB Remote wakeup capable
[  145.823342] em28xx #0:       500mA max power
[  145.823346] em28xx #0:       Table at 0x04, strings=0x206a, 0x006a, 0x0000
[  145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[  145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
[  145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[  145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[  145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[  145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[  145.880355] em28xx #0: Please send an email with this log to:
[  145.880358] em28xx #0:       V4L Mailing List <[email protected]>
[  145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
[  145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
[  145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[  145.880372] em28xx #0:     card=0 -> Unknown EM2800 video grabber
[  145.880375] em28xx #0:     card=1 -> Unknown EM2750/28xx video grabber
[  145.880379] em28xx #0:     card=2 -> Terratec Cinergy 250 USB
[  145.880382] em28xx #0:     card=3 -> Pinnacle PCTV USB 2
[  145.880385] em28xx #0:     card=4 -> Hauppauge WinTV USB 2
[  145.880389] em28xx #0:     card=5 -> MSI VOX USB 2.0
[  145.880392] em28xx #0:     card=6 -> Terratec Cinergy 200 USB
[  145.880395] em28xx #0:     card=7 -> Leadtek Winfast USB II
[  145.880398] em28xx #0:     card=8 -> Kworld USB2800
[  145.880401] em28xx #0:     card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
[  145.880405] em28xx #0:     card=10 -> Hauppauge WinTV HVR 900
[  145.880409] em28xx #0:     card=11 -> Terratec Hybrid XS
[  145.880412] em28xx #0:     card=12 -> Kworld PVR TV 2800 RF
[  145.880415] em28xx #0:     card=13 -> Terratec Prodigy XS
[  145.880419] em28xx #0:     card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[  145.880422] em28xx #0:     card=15 -> V-Gear PocketTV
[  145.880426] em28xx #0:     card=16 -> Hauppauge WinTV HVR 950
[  145.880429] em28xx #0:     card=17 -> Pinnacle PCTV HD Pro Stick
[  145.880432] em28xx #0:     card=18 -> Hauppauge WinTV HVR 900 (R2)
[  145.880436] em28xx #0:     card=19 -> EM2860/SAA711X Reference Design
[  145.880439] em28xx #0:     card=20 -> AMD ATI TV Wonder HD 600
[  145.880442] em28xx #0:     card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[  145.880446] em28xx #0:     card=22 -> EM2710/EM2750/EM2751 webcam grabber
[  145.880450] em28xx #0:     card=23 -> Huaqi DLCW-130
[  145.880453] em28xx #0:     card=24 -> D-Link DUB-T210 TV Tuner
[  145.880456] em28xx #0:     card=25 -> Gadmei UTV310
[  145.880459] em28xx #0:     card=26 -> Hercules Smart TV USB 2.0
[  145.880462] em28xx #0:     card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[  145.880466] em28xx #0:     card=28 -> Leadtek Winfast USB II Deluxe
[  145.880470] em28xx #0:     card=29 -> <NULL>
[  145.880472] em28xx #0:     card=30 -> Videology 20K14XUSB USB2.0
[  145.880476] em28xx #0:     card=31 -> Usbgear VD204v9
[  145.880479] em28xx #0:     card=32 -> Supercomp USB 2.0 TV
[  145.880482] em28xx #0:     card=33 -> <NULL>
[  145.880485] em28xx #0:     card=34 -> Terratec Cinergy A Hybrid XS
[  145.880488] em28xx #0:     card=35 -> Typhoon DVD Maker
[  145.880492] em28xx #0:     card=36 -> NetGMBH Cam
[  145.880495] em28xx #0:     card=37 -> Gadmei UTV330
[  145.880498] em28xx #0:     card=38 -> Yakumo MovieMixer
[  145.880501] em28xx #0:     card=39 -> KWorld PVRTV 300U
[  145.880504] em28xx #0:     card=40 -> Plextor ConvertX PX-TV100U
[  145.880508] em28xx #0:     card=41 -> Kworld 350 U DVB-T
[  145.880511] em28xx #0:     card=42 -> Kworld 355 U DVB-T
[  145.880514] em28xx #0:     card=43 -> Terratec Cinergy T XS
[  145.880517] em28xx #0:     card=44 -> Terratec Cinergy T XS (MT2060)
[  145.880521] em28xx #0:     card=45 -> Pinnacle PCTV DVB-T
[  145.880524] em28xx #0:     card=46 -> Compro, VideoMate U3
[  145.880528] em28xx #0:     card=47 -> KWorld DVB-T 305U
[  145.880531] em28xx #0:     card=48 -> KWorld DVB-T 310U
[  145.880534] em28xx #0:     card=49 -> MSI DigiVox A/D
[  145.880537] em28xx #0:     card=50 -> MSI DigiVox A/D II
[  145.880540] em28xx #0:     card=51 -> Terratec Hybrid XS Secam
[  145.880543] em28xx #0:     card=52 -> DNT DA2 Hybrid
[  145.880547] em28xx #0:     card=53 -> Pinnacle Hybrid Pro
[  145.880550] em28xx #0:     card=54 -> Kworld VS-DVB-T 323UR
[  145.880554] em28xx #0:     card=55 -> Terratec Hybrid XS (em2882)
[  145.880557] em28xx #0:     card=56 -> Pinnacle Hybrid Pro (2)
[  145.880560] em28xx #0:     card=57 -> Kworld PlusTV HD Hybrid 330
[  145.880564] em28xx #0:     card=58 -> Compro VideoMate ForYou/Stereo
[  145.880567] em28xx #0:     card=59 -> <NULL>
[  145.880570] em28xx #0:     card=60 -> Hauppauge WinTV HVR 850
[  145.880573] em28xx #0:     card=61 -> Pixelview PlayTV Box 4 USB 2.0
[  145.880577] em28xx #0:     card=62 -> Gadmei TVR200
[  145.880580] em28xx #0:     card=63 -> Kaiomy TVnPC U2
[  145.880583] em28xx #0:     card=64 -> Easy Cap Capture DC-60
[  145.880586] em28xx #0:     card=65 -> IO-DATA GV-MVP/SZ
[  145.880590] em28xx #0:     card=66 -> Empire dual TV
[  145.880593] em28xx #0:     card=67 -> Terratec Grabby
[  145.880596] em28xx #0:     card=68 -> Terratec AV350
[  145.880599] em28xx #0:     card=69 -> KWorld ATSC 315U HDTV TV Box
[  145.880602] em28xx #0:     card=70 -> Evga inDtube
[  145.880605] em28xx #0:     card=71 -> Silvercrest Webcam 1.3mpix
[  145.880716] em28xx #0: Config register raw data: 0x58
[  145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
[  145.890963] em28xx #0: AC97 features = 0x3eb0
[  145.890966] em28xx #0: Unknown AC97 audio processor detected!
[  145.922320] em28xx #0: v4l2 driver version 0.1.2
[  145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[  146.027706] usbcore: registered new interface driver em28xx
[  146.027787] em28xx driver loaded
[  146.062766] usbcore: registered new interface driver snd-usb-audio

This device was working with 2.6.28 together with the out-of-tree driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").

Quoted 8 lines
Quoted 6 lines

What has to be done in order this device can work with the newest Linux kernel?

Regards,

Márton Németh

never use trees deliberately out-of-tree?

Quoted 7 lines

Maybe I was not clear enough in my description. Currently I am using 2.6.31-rc7 without any modification. This version contained the message that I should contact this mailing list (see at 145.880355).

Regards,

Márton Németh

oooh, good that we have that message now.

Then, port all you still can get before he closed his sources?

Cheers,
Hermann

#4 lore raw

2009/8/23 hermann pitton <[email protected]>:

Quoted 147 lines

Am Sonntag, den 23.08.2009, 15:14 +0200 schrieb Németh Márton:

Quoted 145 lines
Quoted 129 lines · hermann pitton

Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton:

Quoted 128 lines

Hi,

I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':

[  144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
[  144.556371] usb 3-3: configuration #1 chosen from 1 choice
[  145.598079] Linux video capture interface: v2.00
[  145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) [  145.742186] em28xx #0: chip ID is em2882/em2883
[  145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[  145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[  145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[  145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[  145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[  145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[  145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[  145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
[  145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
[  145.823334] em28xx #0: EEPROM info:
[  145.823336] em28xx #0:       AC97 audio (5 sample rates)
[  145.823340] em28xx #0:       USB Remote wakeup capable
[  145.823342] em28xx #0:       500mA max power
[  145.823346] em28xx #0:       Table at 0x04, strings=0x206a, 0x006a, 0x0000
[  145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[  145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
[  145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[  145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[  145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [  145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[  145.880355] em28xx #0: Please send an email with this log to:
[  145.880358] em28xx #0:       V4L Mailing List <[email protected]>
[  145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
[  145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
[  145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[  145.880372] em28xx #0:     card=0 -> Unknown EM2800 video grabber
[  145.880375] em28xx #0:     card=1 -> Unknown EM2750/28xx video grabber
[  145.880379] em28xx #0:     card=2 -> Terratec Cinergy 250 USB
[  145.880382] em28xx #0:     card=3 -> Pinnacle PCTV USB 2
[  145.880385] em28xx #0:     card=4 -> Hauppauge WinTV USB 2
[  145.880389] em28xx #0:     card=5 -> MSI VOX USB 2.0
[  145.880392] em28xx #0:     card=6 -> Terratec Cinergy 200 USB
[  145.880395] em28xx #0:     card=7 -> Leadtek Winfast USB II
[  145.880398] em28xx #0:     card=8 -> Kworld USB2800
[  145.880401] em28xx #0:     card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker [  145.880405] em28xx #0:     card=10 -> Hauppauge WinTV HVR 900
[  145.880409] em28xx #0:     card=11 -> Terratec Hybrid XS
[  145.880412] em28xx #0:     card=12 -> Kworld PVR TV 2800 RF
[  145.880415] em28xx #0:     card=13 -> Terratec Prodigy XS
[  145.880419] em28xx #0:     card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 [  145.880422] em28xx #0:     card=15 -> V-Gear PocketTV
[  145.880426] em28xx #0:     card=16 -> Hauppauge WinTV HVR 950
[  145.880429] em28xx #0:     card=17 -> Pinnacle PCTV HD Pro Stick
[  145.880432] em28xx #0:     card=18 -> Hauppauge WinTV HVR 900 (R2)
[  145.880436] em28xx #0:     card=19 -> EM2860/SAA711X Reference Design
[  145.880439] em28xx #0:     card=20 -> AMD ATI TV Wonder HD 600
[  145.880442] em28xx #0:     card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[  145.880446] em28xx #0:     card=22 -> EM2710/EM2750/EM2751 webcam grabber
[  145.880450] em28xx #0:     card=23 -> Huaqi DLCW-130
[  145.880453] em28xx #0:     card=24 -> D-Link DUB-T210 TV Tuner
[  145.880456] em28xx #0:     card=25 -> Gadmei UTV310
[  145.880459] em28xx #0:     card=26 -> Hercules Smart TV USB 2.0
[  145.880462] em28xx #0:     card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[  145.880466] em28xx #0:     card=28 -> Leadtek Winfast USB II Deluxe
[  145.880470] em28xx #0:     card=29 -> <NULL>
[  145.880472] em28xx #0:     card=30 -> Videology 20K14XUSB USB2.0
[  145.880476] em28xx #0:     card=31 -> Usbgear VD204v9
[  145.880479] em28xx #0:     card=32 -> Supercomp USB 2.0 TV
[  145.880482] em28xx #0:     card=33 -> <NULL>
[  145.880485] em28xx #0:     card=34 -> Terratec Cinergy A Hybrid XS
[  145.880488] em28xx #0:     card=35 -> Typhoon DVD Maker
[  145.880492] em28xx #0:     card=36 -> NetGMBH Cam
[  145.880495] em28xx #0:     card=37 -> Gadmei UTV330
[  145.880498] em28xx #0:     card=38 -> Yakumo MovieMixer
[  145.880501] em28xx #0:     card=39 -> KWorld PVRTV 300U
[  145.880504] em28xx #0:     card=40 -> Plextor ConvertX PX-TV100U
[  145.880508] em28xx #0:     card=41 -> Kworld 350 U DVB-T
[  145.880511] em28xx #0:     card=42 -> Kworld 355 U DVB-T
[  145.880514] em28xx #0:     card=43 -> Terratec Cinergy T XS
[  145.880517] em28xx #0:     card=44 -> Terratec Cinergy T XS (MT2060)
[  145.880521] em28xx #0:     card=45 -> Pinnacle PCTV DVB-T
[  145.880524] em28xx #0:     card=46 -> Compro, VideoMate U3
[  145.880528] em28xx #0:     card=47 -> KWorld DVB-T 305U
[  145.880531] em28xx #0:     card=48 -> KWorld DVB-T 310U
[  145.880534] em28xx #0:     card=49 -> MSI DigiVox A/D
[  145.880537] em28xx #0:     card=50 -> MSI DigiVox A/D II
[  145.880540] em28xx #0:     card=51 -> Terratec Hybrid XS Secam
[  145.880543] em28xx #0:     card=52 -> DNT DA2 Hybrid
[  145.880547] em28xx #0:     card=53 -> Pinnacle Hybrid Pro
[  145.880550] em28xx #0:     card=54 -> Kworld VS-DVB-T 323UR
[  145.880554] em28xx #0:     card=55 -> Terratec Hybrid XS (em2882)
[  145.880557] em28xx #0:     card=56 -> Pinnacle Hybrid Pro (2)
[  145.880560] em28xx #0:     card=57 -> Kworld PlusTV HD Hybrid 330
[  145.880564] em28xx #0:     card=58 -> Compro VideoMate ForYou/Stereo
[  145.880567] em28xx #0:     card=59 -> <NULL>
[  145.880570] em28xx #0:     card=60 -> Hauppauge WinTV HVR 850
[  145.880573] em28xx #0:     card=61 -> Pixelview PlayTV Box 4 USB 2.0
[  145.880577] em28xx #0:     card=62 -> Gadmei TVR200
[  145.880580] em28xx #0:     card=63 -> Kaiomy TVnPC U2
[  145.880583] em28xx #0:     card=64 -> Easy Cap Capture DC-60
[  145.880586] em28xx #0:     card=65 -> IO-DATA GV-MVP/SZ
[  145.880590] em28xx #0:     card=66 -> Empire dual TV
[  145.880593] em28xx #0:     card=67 -> Terratec Grabby
[  145.880596] em28xx #0:     card=68 -> Terratec AV350
[  145.880599] em28xx #0:     card=69 -> KWorld ATSC 315U HDTV TV Box
[  145.880602] em28xx #0:     card=70 -> Evga inDtube
[  145.880605] em28xx #0:     card=71 -> Silvercrest Webcam 1.3mpix
[  145.880716] em28xx #0: Config register raw data: 0x58
[  145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
[  145.890963] em28xx #0: AC97 features = 0x3eb0
[  145.890966] em28xx #0: Unknown AC97 audio processor detected!
[  145.922320] em28xx #0: v4l2 driver version 0.1.2
[  145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[  146.027706] usbcore: registered new interface driver em28xx
[  146.027787] em28xx driver loaded
[  146.062766] usbcore: registered new interface driver snd-usb-audio

This device was working with 2.6.28 together with the out-of-tree driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").

Quoted 8 lines
Quoted 6 lines

What has to be done in order this device can work with the newest Linux kernel?

Regards,

   Márton Németh

never use trees deliberately out-of-tree?

Maybe I was not clear enough in my description. Currently I am using 2.6.31-rc7 without any modification. This version contained the message that I should contact this mailing list (see at 145.880355).

Regards,

Quoted 8 lines
Quoted 1 line

      Márton Németh

oooh, good that we have that message now.

Then, port all you still can get before he closed his sources?

Cheers,
Hermann

Hello Németh,

I committed some changes to get this board working a few weeks ago. I will check your dmesg output and see if the changes missed the merge window. It's possible the changes didn't make it in time for 2.6.31, so I will have to check.

Cheers,

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
#5 lore raw

Am Sonntag, den 23.08.2009, 09:29 -0400 schrieb Devin Heitmueller:

Quoted 159 lines

2009/8/23 hermann pitton <[email protected]>:

Quoted 147 lines

Am Sonntag, den 23.08.2009, 15:14 +0200 schrieb Németh Márton:

Quoted 145 lines
Quoted 129 lines · hermann pitton

Am Sonntag, den 23.08.2009, 14:48 +0200 schrieb Németh Márton:

Quoted 128 lines

Hi,

I have a Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881). I am running Linux kernel 2.6.31-rc7. When I plug my device I get the following messages in 'dmesg':

[  144.434151] usb 3-3: new high speed USB device using ehci_hcd and address 3
[  144.556371] usb 3-3: configuration #1 chosen from 1 choice
[  145.598079] Linux video capture interface: v2.00
[  145.740558] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[  145.742186] em28xx #0: chip ID is em2882/em2883
[  145.823056] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[  145.823078] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[  145.823096] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[  145.823113] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[  145.823130] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823147] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823163] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[  145.823180] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[  145.823197] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[  145.823213] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823230] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823246] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823263] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823279] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823296] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
[  145.823312] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[  145.823331] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
[  145.823334] em28xx #0: EEPROM info:
[  145.823336] em28xx #0:       AC97 audio (5 sample rates)
[  145.823340] em28xx #0:       USB Remote wakeup capable
[  145.823342] em28xx #0:       500mA max power
[  145.823346] em28xx #0:       Table at 0x04, strings=0x206a, 0x006a, 0x0000
[  145.828537] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[  145.860871] em28xx #0: found i2c device @ 0xa0 [eeprom]
[  145.865864] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[  145.868237] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[  145.880344] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[  145.880352] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[  145.880355] em28xx #0: Please send an email with this log to:
[  145.880358] em28xx #0:       V4L Mailing List <[email protected]>
[  145.880362] em28xx #0: Board eeprom hash is 0xc49e2420
[  145.880365] em28xx #0: Board i2c devicelist hash is 0x27e10080
[  145.880368] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[  145.880372] em28xx #0:     card=0 -> Unknown EM2800 video grabber
[  145.880375] em28xx #0:     card=1 -> Unknown EM2750/28xx video grabber
[  145.880379] em28xx #0:     card=2 -> Terratec Cinergy 250 USB
[  145.880382] em28xx #0:     card=3 -> Pinnacle PCTV USB 2
[  145.880385] em28xx #0:     card=4 -> Hauppauge WinTV USB 2
[  145.880389] em28xx #0:     card=5 -> MSI VOX USB 2.0
[  145.880392] em28xx #0:     card=6 -> Terratec Cinergy 200 USB
[  145.880395] em28xx #0:     card=7 -> Leadtek Winfast USB II
[  145.880398] em28xx #0:     card=8 -> Kworld USB2800
[  145.880401] em28xx #0:     card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
[  145.880405] em28xx #0:     card=10 -> Hauppauge WinTV HVR 900
[  145.880409] em28xx #0:     card=11 -> Terratec Hybrid XS
[  145.880412] em28xx #0:     card=12 -> Kworld PVR TV 2800 RF
[  145.880415] em28xx #0:     card=13 -> Terratec Prodigy XS
[  145.880419] em28xx #0:     card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[  145.880422] em28xx #0:     card=15 -> V-Gear PocketTV
[  145.880426] em28xx #0:     card=16 -> Hauppauge WinTV HVR 950
[  145.880429] em28xx #0:     card=17 -> Pinnacle PCTV HD Pro Stick
[  145.880432] em28xx #0:     card=18 -> Hauppauge WinTV HVR 900 (R2)
[  145.880436] em28xx #0:     card=19 -> EM2860/SAA711X Reference Design
[  145.880439] em28xx #0:     card=20 -> AMD ATI TV Wonder HD 600
[  145.880442] em28xx #0:     card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[  145.880446] em28xx #0:     card=22 -> EM2710/EM2750/EM2751 webcam grabber
[  145.880450] em28xx #0:     card=23 -> Huaqi DLCW-130
[  145.880453] em28xx #0:     card=24 -> D-Link DUB-T210 TV Tuner
[  145.880456] em28xx #0:     card=25 -> Gadmei UTV310
[  145.880459] em28xx #0:     card=26 -> Hercules Smart TV USB 2.0
[  145.880462] em28xx #0:     card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[  145.880466] em28xx #0:     card=28 -> Leadtek Winfast USB II Deluxe
[  145.880470] em28xx #0:     card=29 -> <NULL>
[  145.880472] em28xx #0:     card=30 -> Videology 20K14XUSB USB2.0
[  145.880476] em28xx #0:     card=31 -> Usbgear VD204v9
[  145.880479] em28xx #0:     card=32 -> Supercomp USB 2.0 TV
[  145.880482] em28xx #0:     card=33 -> <NULL>
[  145.880485] em28xx #0:     card=34 -> Terratec Cinergy A Hybrid XS
[  145.880488] em28xx #0:     card=35 -> Typhoon DVD Maker
[  145.880492] em28xx #0:     card=36 -> NetGMBH Cam
[  145.880495] em28xx #0:     card=37 -> Gadmei UTV330
[  145.880498] em28xx #0:     card=38 -> Yakumo MovieMixer
[  145.880501] em28xx #0:     card=39 -> KWorld PVRTV 300U
[  145.880504] em28xx #0:     card=40 -> Plextor ConvertX PX-TV100U
[  145.880508] em28xx #0:     card=41 -> Kworld 350 U DVB-T
[  145.880511] em28xx #0:     card=42 -> Kworld 355 U DVB-T
[  145.880514] em28xx #0:     card=43 -> Terratec Cinergy T XS
[  145.880517] em28xx #0:     card=44 -> Terratec Cinergy T XS (MT2060)
[  145.880521] em28xx #0:     card=45 -> Pinnacle PCTV DVB-T
[  145.880524] em28xx #0:     card=46 -> Compro, VideoMate U3
[  145.880528] em28xx #0:     card=47 -> KWorld DVB-T 305U
[  145.880531] em28xx #0:     card=48 -> KWorld DVB-T 310U
[  145.880534] em28xx #0:     card=49 -> MSI DigiVox A/D
[  145.880537] em28xx #0:     card=50 -> MSI DigiVox A/D II
[  145.880540] em28xx #0:     card=51 -> Terratec Hybrid XS Secam
[  145.880543] em28xx #0:     card=52 -> DNT DA2 Hybrid
[  145.880547] em28xx #0:     card=53 -> Pinnacle Hybrid Pro
[  145.880550] em28xx #0:     card=54 -> Kworld VS-DVB-T 323UR
[  145.880554] em28xx #0:     card=55 -> Terratec Hybrid XS (em2882)
[  145.880557] em28xx #0:     card=56 -> Pinnacle Hybrid Pro (2)
[  145.880560] em28xx #0:     card=57 -> Kworld PlusTV HD Hybrid 330
[  145.880564] em28xx #0:     card=58 -> Compro VideoMate ForYou/Stereo
[  145.880567] em28xx #0:     card=59 -> <NULL>
[  145.880570] em28xx #0:     card=60 -> Hauppauge WinTV HVR 850
[  145.880573] em28xx #0:     card=61 -> Pixelview PlayTV Box 4 USB 2.0
[  145.880577] em28xx #0:     card=62 -> Gadmei TVR200
[  145.880580] em28xx #0:     card=63 -> Kaiomy TVnPC U2
[  145.880583] em28xx #0:     card=64 -> Easy Cap Capture DC-60
[  145.880586] em28xx #0:     card=65 -> IO-DATA GV-MVP/SZ
[  145.880590] em28xx #0:     card=66 -> Empire dual TV
[  145.880593] em28xx #0:     card=67 -> Terratec Grabby
[  145.880596] em28xx #0:     card=68 -> Terratec AV350
[  145.880599] em28xx #0:     card=69 -> KWorld ATSC 315U HDTV TV Box
[  145.880602] em28xx #0:     card=70 -> Evga inDtube
[  145.880605] em28xx #0:     card=71 -> Silvercrest Webcam 1.3mpix
[  145.880716] em28xx #0: Config register raw data: 0x58
[  145.890593] em28xx #0: AC97 vendor ID = 0x3eb03eb0
[  145.890963] em28xx #0: AC97 features = 0x3eb0
[  145.890966] em28xx #0: Unknown AC97 audio processor detected!
[  145.922320] em28xx #0: v4l2 driver version 0.1.2
[  145.973630] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[  146.027706] usbcore: registered new interface driver em28xx
[  146.027787] em28xx driver loaded
[  146.062766] usbcore: registered new interface driver snd-usb-audio

This device was working with 2.6.28 together with the out-of-tree driver from mcentral.de ("hg clone http://mcentral.de/hg/~mrec/em28xx-new").

Quoted 8 lines
Quoted 6 lines

What has to be done in order this device can work with the newest Linux kernel?

Regards,

Márton Németh

never use trees deliberately out-of-tree?

Maybe I was not clear enough in my description. Currently I am using 2.6.31-rc7 without any modification. This version contained the message that I should contact this mailing list (see at 145.880355).

Regards,

Quoted 8 lines
Quoted 1 line

Márton Németh

oooh, good that we have that message now.

Then, port all you still can get before he closed his sources?

Cheers,
Hermann

Hello Németh,

Quoted 9 lines

I committed some changes to get this board working a few weeks ago. I will check your dmesg output and see if the changes missed the merge window. It's possible the changes didn't make it in time for 2.6.31, so I will have to check.

Cheers,

Devin

Hi Devin,

thanks!

Sorry for disturbing your Sunday.

Does Daniel with that x3m stuff has any chance to get it working with your latest fixes?

I don't find anything further on the lists and therefore I'm ranting ...

Cheers,
Hermann

#6 lore raw
Quoted 6 lines · hermann pitton

Hi Devin,

thanks!

Sorry for disturbing your Sunday.

Quoted 7 lines

Does Daniel with that x3m stuff has any chance to get it working with your latest fixes?

I don't find anything further on the lists and therefore I'm ranting ...

Cheers,
Hermann

Hello Hermann,

I think you meant to post this onto the other thread.

Regarding Daniel's issue - I would have to see the lspci output to see if he has the same card.

Probably the fastest approach would be for him to just install the latest v4l-dvb code and see if it starts working.

Cheers,

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
author
#7 lore raw
In reply to Devin Heitmueller
Quoted 4 lines · Devin Heitmueller

I committed some changes to get this board working a few weeks ago. I will check your dmesg output and see if the changes missed the merge window. It's possible the changes didn't make it in time for 2.6.31, so I will have to check.

I tried the following software setup with Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881): Linux kernel 2.6.31-rc7 updated with the
http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6.

When I plug the device I still get the following message:

[  111.681186] usb 4-3: new high speed USB device using ehci_hcd and address 3
[  111.803542] usb 4-3: configuration #1 chosen from 1 choice
[  112.196629] Linux video capture interface: v2.00
[  112.376039] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[  112.377937] em28xx #0: chip ID is em2882/em2883
[  112.383927] usbcore: registered new interface driver snd-usb-audio
[  112.460285] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[  112.460308] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[  112.460326] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[  112.460343] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[  112.460360] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  112.460377] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  112.460393] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[  112.460410] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[  112.460426] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[  112.460443] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  112.460460] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  112.460476] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  112.460493] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  112.460509] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  112.460526] em28xx #0: i2c eeprom e0: 5a 00 55 aa cb 73 57 03 00 17 d4 01 00 00 00 00
[  112.460543] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[  112.460561] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc49e2420
[  112.460564] em28xx #0: EEPROM info:
[  112.460567] em28xx #0:	AC97 audio (5 sample rates)
[  112.460570] em28xx #0:	USB Remote wakeup capable
[  112.460573] em28xx #0:	500mA max power
[  112.460577] em28xx #0:	Table at 0x04, strings=0x206a, 0x006a, 0x0000
[  112.466288] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[  112.499766] em28xx #0: found i2c device @ 0xa0 [eeprom]
[  112.505263] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[  112.507760] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[  112.520001] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[  112.520239] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[  112.520244] em28xx #0: Please send an email with this log to:
[  112.520247] em28xx #0: 	V4L Mailing List <[email protected]>
[  112.520251] em28xx #0: Board eeprom hash is 0xc49e2420
[  112.520254] em28xx #0: Board i2c devicelist hash is 0x27e10080
[  112.520257] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[  112.520262] em28xx #0:     card=0 -> Unknown EM2800 video grabber
[  112.520266] em28xx #0:     card=1 -> Unknown EM2750/28xx video grabber
[  112.520269] em28xx #0:     card=2 -> Terratec Cinergy 250 USB
[  112.520273] em28xx #0:     card=3 -> Pinnacle PCTV USB 2
[  112.520276] em28xx #0:     card=4 -> Hauppauge WinTV USB 2
[  112.520279] em28xx #0:     card=5 -> MSI VOX USB 2.0
[  112.520283] em28xx #0:     card=6 -> Terratec Cinergy 200 USB
[  112.520286] em28xx #0:     card=7 -> Leadtek Winfast USB II
[  112.520290] em28xx #0:     card=8 -> Kworld USB2800
[  112.520293] em28xx #0:     card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker
[  112.520297] em28xx #0:     card=10 -> Hauppauge WinTV HVR 900
[  112.520301] em28xx #0:     card=11 -> Terratec Hybrid XS
[  112.520304] em28xx #0:     card=12 -> Kworld PVR TV 2800 RF
[  112.520308] em28xx #0:     card=13 -> Terratec Prodigy XS
[  112.520311] em28xx #0:     card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[  112.520315] em28xx #0:     card=15 -> V-Gear PocketTV
[  112.520318] em28xx #0:     card=16 -> Hauppauge WinTV HVR 950
[  112.520322] em28xx #0:     card=17 -> Pinnacle PCTV HD Pro Stick
[  112.520325] em28xx #0:     card=18 -> Hauppauge WinTV HVR 900 (R2)
[  112.520329] em28xx #0:     card=19 -> EM2860/SAA711X Reference Design
[  112.520332] em28xx #0:     card=20 -> AMD ATI TV Wonder HD 600
[  112.520336] em28xx #0:     card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[  112.520340] em28xx #0:     card=22 -> EM2710/EM2750/EM2751 webcam grabber
[  112.520343] em28xx #0:     card=23 -> Huaqi DLCW-130
[  112.520346] em28xx #0:     card=24 -> D-Link DUB-T210 TV Tuner
[  112.520350] em28xx #0:     card=25 -> Gadmei UTV310
[  112.520353] em28xx #0:     card=26 -> Hercules Smart TV USB 2.0
[  112.520356] em28xx #0:     card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[  112.520360] em28xx #0:     card=28 -> Leadtek Winfast USB II Deluxe
[  112.520364] em28xx #0:     card=29 -> <NULL>
[  112.520367] em28xx #0:     card=30 -> Videology 20K14XUSB USB2.0
[  112.520370] em28xx #0:     card=31 -> Usbgear VD204v9
[  112.520374] em28xx #0:     card=32 -> Supercomp USB 2.0 TV
[  112.520377] em28xx #0:     card=33 -> <NULL>
[  112.520380] em28xx #0:     card=34 -> Terratec Cinergy A Hybrid XS
[  112.520384] em28xx #0:     card=35 -> Typhoon DVD Maker
[  112.520387] em28xx #0:     card=36 -> NetGMBH Cam
[  112.520390] em28xx #0:     card=37 -> Gadmei UTV330
[  112.520393] em28xx #0:     card=38 -> Yakumo MovieMixer
[  112.520397] em28xx #0:     card=39 -> KWorld PVRTV 300U
[  112.520400] em28xx #0:     card=40 -> Plextor ConvertX PX-TV100U
[  112.520403] em28xx #0:     card=41 -> Kworld 350 U DVB-T
[  112.520407] em28xx #0:     card=42 -> Kworld 355 U DVB-T
[  112.520410] em28xx #0:     card=43 -> Terratec Cinergy T XS
[  112.520413] em28xx #0:     card=44 -> Terratec Cinergy T XS (MT2060)
[  112.520417] em28xx #0:     card=45 -> Pinnacle PCTV DVB-T
[  112.520420] em28xx #0:     card=46 -> Compro, VideoMate U3
[  112.520424] em28xx #0:     card=47 -> KWorld DVB-T 305U
[  112.520427] em28xx #0:     card=48 -> KWorld DVB-T 310U
[  112.520430] em28xx #0:     card=49 -> MSI DigiVox A/D
[  112.520433] em28xx #0:     card=50 -> MSI DigiVox A/D II
[  112.520437] em28xx #0:     card=51 -> Terratec Hybrid XS Secam
[  112.520440] em28xx #0:     card=52 -> DNT DA2 Hybrid
[  112.520444] em28xx #0:     card=53 -> Pinnacle Hybrid Pro
[  112.520447] em28xx #0:     card=54 -> Kworld VS-DVB-T 323UR
[  112.520450] em28xx #0:     card=55 -> Terratec Hybrid XS (em2882)
[  112.520454] em28xx #0:     card=56 -> Pinnacle Hybrid Pro (2)
[  112.520457] em28xx #0:     card=57 -> Kworld PlusTV HD Hybrid 330
[  112.520461] em28xx #0:     card=58 -> Compro VideoMate ForYou/Stereo
[  112.520465] em28xx #0:     card=59 -> <NULL>
[  112.520468] em28xx #0:     card=60 -> Hauppauge WinTV HVR 850
[  112.520471] em28xx #0:     card=61 -> Pixelview PlayTV Box 4 USB 2.0
[  112.520475] em28xx #0:     card=62 -> Gadmei TVR200
[  112.520478] em28xx #0:     card=63 -> Kaiomy TVnPC U2
[  112.520481] em28xx #0:     card=64 -> Easy Cap Capture DC-60
[  112.520485] em28xx #0:     card=65 -> IO-DATA GV-MVP/SZ
[  112.520488] em28xx #0:     card=66 -> Empire dual TV
[  112.520491] em28xx #0:     card=67 -> Terratec Grabby
[  112.520495] em28xx #0:     card=68 -> Terratec AV350
[  112.520498] em28xx #0:     card=69 -> KWorld ATSC 315U HDTV TV Box
[  112.520501] em28xx #0:     card=70 -> Evga inDtube
[  112.520505] em28xx #0:     card=71 -> Silvercrest Webcam 1.3mpix
[  112.520760] em28xx #0: Config register raw data: 0x58
[  112.530630] em28xx #0: AC97 vendor ID = 0x7eb07eb0
[  112.531000] em28xx #0: AC97 features = 0x7eb0
[  112.531497] em28xx #0: Unknown AC97 audio processor detected!
[  112.554574] em28xx #0: v4l2 driver version 0.1.2
[  112.592340] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[  112.598179] usbcore: registered new interface driver em28xx
[  112.598234] em28xx driver loaded

What should be the next step to get this device working?

Regards,

Márton Németh

#8 lore raw

2009/8/30 Németh Márton <[email protected]>:

Quoted 6 lines
Quoted 4 lines · Devin Heitmueller

I committed some changes to get this board working a few weeks ago.  I will check your dmesg output and see if the changes missed the merge window.  It's possible the changes didn't make it in time for 2.6.31, so I will have to check.

Quoted 6 lines

I tried the following software setup with Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881): Linux kernel 2.6.31-rc7 updated with the
http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6.

When I plug the device I still get the following message:

<snip>

The changes have not gone upstream yet. Mauro wrote some code for a potential firmware extract script, but it doesn't work yet.

I've been tied up in another project, so I haven't gotten back to it. I know I keep dragging this out, but given my current workload I probably won't get the work done for the next couple of weeks.

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
author
#9 lore raw

Devin Heitmueller worte:

Quoted 12 lines

2009/8/30 Németh Márton <[email protected]>:

Quoted 11 lines
Quoted 4 lines · Devin Heitmueller

I committed some changes to get this board working a few weeks ago. I will check your dmesg output and see if the changes missed the merge window. It's possible the changes didn't make it in time for 2.6.31, so I will have to check.

I tried the following software setup with Pinnacle Hybrid Pro Stick (320e) (USB ID: eb1a:2881): Linux kernel 2.6.31-rc7 updated with the
http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6.

When I plug the device I still get the following message:

Quoted 8 lines

<snip>

The changes have not gone upstream yet. Mauro wrote some code for a potential firmware extract script, but it doesn't work yet.

I've been tied up in another project, so I haven't gotten back to it. I know I keep dragging this out, but given my current workload I probably won't get the work done for the next couple of weeks.

OK, no problem. I just wanted to know whether I can test or try something myself.

Regards,

Márton Németh