Skip to contentSkip to conversation

T is a very tedious job to cut separate plan

DISCUSSION Sandberg 1 participant 1 message Aug 25, 2009

lore
Share & tools
lore

Sandberg

author
#0 lore raw

Ing to the drawing of the hull in Fig. 131. The propeller of a high-speed boat is of a high pitch and generally of the two-blade type. It should be at least 3 inches in diameter and with a pitch of about 10 inches. By this it is meant that the propeller theoretically should advance 10 inches

_______________________________________________
Containers mailing list Containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
https://lists.linux-foundation.org/mailman/listinfo/containers