Help: after crypttab modify > begin: waiting for root file system
Sorry for my poor english and for the not-so-clear topic, I hope someone can help me because I'm in serious trouble :(
I run (ehm... I was running :( ) a headless debian lenny server with encrypted LUKS filesystem. After I made an apparently harmless modify to the crypttab file I can no longer boot the system. At startup I get the message:
Begin: waiting for root file system...
And all is hanged up. I have a plaintext /boot partition with the bootloader (grub), while everything else is encrypted. My /etc/crypttab file was something like this:
lg0-lv0_crypt /dev/mapper/lg0-lv0 none luks
so that at boot time it was necessary to manually insert a passphrase to unlock the filesystem (lg0-lv0_crypt is mounted as / on fstab). Now, I must leave the place where the server resides for some weeks, so I decided to temporarily override this behaviour with a cleartext key file to avoid problems due to accidental rebooting. So I did:
1) put a random key_temp file in /boot with 600 permission
2) cryptsetup luksAddKey /dev/mapper/lg0-lv0 /boot/key_temp
3) edited /etc/crypttab to look like this:
lg0-lv0_crypt /dev/mapper/lg0-lv0 /boot/key_temp luks
4) update-initramfs -u ALL
but when I rebooted... all was hanged up as I said before. I can't manage even how to undo my changes now.
Can you help me please? U_U
hey,
this is an issue with the debian/ubuntu cryptroot implementation.
Quoted 23 lines · On 31/08/2009 Tommaso wrote:
I run (ehm... I was running :( ) a headless debian lenny server with encrypted LUKS filesystem. After I made an apparently harmless modify to the crypttab file I can no longer boot the system. At startup I get the message:
Begin: waiting for root file system...
And all is hanged up. I have a plaintext /boot partition with the bootloader (grub), while everything else is encrypted. My
/etc/crypttabfile was something like this:lg0-lv0_crypt
/dev/mapper/lg0-lv0none luksso that at boot time it was necessary to manually insert a passphrase to unlock the filesystem (lg0-lv0_crypt is mounted as / on fstab). Now, I must leave the place where the server resides for some weeks, so I decided to temporarily override this behaviour with a cleartext key file to avoid problems due to accidental rebooting. So I did:
1) put a randomkey_tempfile in /boot with 600 permission
2) cryptsetup luksAddKey/dev/mapper/lg0-lv0/boot/key_temp
3) edited/etc/crypttabto look like this:
Quoted 1 line
lg0-lv0_crypt
/dev/mapper/lg0-lv0/boot/key_templuks
i guess the problem here is that /boot is not mounted. try the following:
- boot with boot parameter set to 'break' in grub
- when the initramfs emergency shell is started, mount /boot:
(initramfs) mount -t ext2 /dev/XXX /boot
- try to unlock the crypted rootfs manually:
(initramfs) cryptsetup --key-file=/boo/key_temp luksOpen /dev/mapper/lg0-lv0 lg0-lv0_crypt
if that works, you should change your /etc/crypttab to use the passdev keyscript in order to mount the /boot filesystem:
lg0-lv0_crypt /dev/mapper/lg0-lv0 /dev/XXX:/key_temp luks,keyscript=/lib/cryptsetup/scripts/passdev
and regnerate your initramfs. for more information the see the section '10. the "passdev" keyscript' in /usr/share/doc/cryptsetup/README.initramfs.gz
Quoted 1 line
4) update-initramfs -u ALL
that's never a good idea. better update the initramfs only for one kernel first and later if everything works as expected, update the others. you should have a backup of the old initramfs at initrd.img.bak though (i.e /boot/initrd.img-$(uname -r).bak).
try booting with this old initramfs by adding '.bak' to the path of your initramfs in grub.
greetings,
jonas
Quoted 1 line · Jonas Meurer
hey
Thank you for your reply :) I already managed to rescue my system and undo my changes using the initrd.imgXXX.bak as you said (phew! :) ), however I still have a couple of problems, one of which is really WEIRD...
The first problem is that I still can't manage how to use the cleartext key_temp on /boot to automatically start the system without requesting a passphrase. However thank you for pointing me at the passdev script, I didn't know that, suppose it's intended also for this, I'll give a look at that as soon as possible.
The second, weird problem is the following. Being unable to use the keyfile for the automount, I temporarily added a second passphrase slot to the above device. So now, when at boot a passphrase is requested, you can insert either passphrase1 (the old one) or passphrase2 (the new one, which is known also by other trusted people who should so be able to reboot the system in my absence).
The WEIRD problem now is: if I insert passphrase1 the system starts normally and all is good. If I insert passphrase2... the passphrase is accepted, the disk is unlocked, the system starts... and all works EXCEPT for the network card o.O It hangs up on DHCPREQUEST and after a minute or so it says:
eth1: device is not ready
I'm really unable to understand why the two issues (the different passphrase and the eth1 not ready) should be related... but I succeeded in reproducing this behaviour many times and I'm pretty sure it depends on the passphrase...
hey again,
Quoted 9 lines · On 01/09/2009 Tommaso wrote:
Thank you for your reply :) I already managed to rescue my system and undo my changes using the initrd.imgXXX.bak as you said (phew! :) ), however I still have a couple of problems, one of which is really WEIRD...
The first problem is that I still can't manage how to use the cleartext
key_tempon /boot to automatically start the system without requesting a passphrase. However thank you for pointing me at the passdev script, I didn't know that, suppose it's intended also for this, I'll give a look at that as soon as possible.
yes, that's exactly what passdev is meant for.
Quoted 12 lines
The second, weird problem is the following. Being unable to use the keyfile for the automount, I temporarily added a second passphrase slot to the above device. So now, when at boot a passphrase is requested, you can insert either passphrase1 (the old one) or passphrase2 (the new one, which is known also by other trusted people who should so be able to reboot the system in my absence).
The WEIRD problem now is: if I insert passphrase1 the system starts normally and all is good. If I insert passphrase2... the passphrase is accepted, the disk is unlocked, the system starts... and all works EXCEPT for the network card o.O It hangs up on DHCPREQUEST and after a minute or so it says:
Quoted 6 lines
eth1: device is not ready
I'm really unable to understand why the two issues (the different passphrase and the eth1 not ready) should be related... but I succeeded in reproducing this behaviour many times and I'm pretty sure it depends on the passphrase...
that really sounds weird. if the unlocked device _is_ the same for both passphrases, then it will behave similar. thus i don't see how issues with network should be related to the used keyslot.
greetings,
jonas
Quoted 1 line · Jonas Meurer
yes, that's exactly what passdev is meant for.
Problem solved indeed, passdev works :)
Quoted 3 lines
that really sounds weird. if the unlocked device _is_ the same for both passphrases, then it will behave similar. thus i don't see how issues with network should be related to the used keyslot.
Ok, maybe I got it, but maybe you won't like the answer.
The error I was getting with the new passphrase was:
ADDRCONF(NETDEV_UP): eth1: link is not ready
I found many topics about, and I discovered that this is an issue of a bad renaming of the network interfaces, see i.e.
http://marc.info/?l=debian-user&m=114369893509924&w=2
In fact I have two NICs on the server, one of which (eth0) is not used (hasn't got even a cable). So it seems that, due to the dynamic remapping of the interfaces at boot, if I insert the old passphrase the interface names are right, but if I change the passphrase, probably because of some kind of variation in the entropy pattern of the system, the names are swapped. I solved this issue installing ifrename and managing the interfaces name according to their MAC.
HOWEVER: if this is the case (that is, if the cause of the name swapping is due to the passphrase inserted for cryptsetup), I believe it's not a good thing. It would indicate some kind of fixed entropy pattern variation according to a given passphrase, probably not a desiderable behaviour in regard to the security of encrypted filesystems.
I also addressed this issue on
http://forums.debian.net/viewtopic.php?f=10&t=44690
Thank you :)