Add support for the DevKit8000 board

PATCH New Frederik Kriewitz 3 participants 6 messages Aug 23, 2009 – Sep 5, 2009 Kbuild

lore

Share & tools

lore

Frederik Kriewitz

author

2009-08-23 10:56 UTC #0 lore raw

PATCH 1/1 Add support for the DevKit8000 board

This patch adds support for the DevKit8000 board.

Signed-off-by Frederik Kriewitz <[email protected]>

---
mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000)

---
 MAINTAINERS                         |    4 +
 MAKEALL                             |    1 +
 Makefile                            |    3 +
 board/timll/devkit8000/Makefile     |   52 +++++
 board/timll/devkit8000/config.mk    |   35 ++++
 board/timll/devkit8000/devkit8000.c |  131 ++++++++++++
 board/timll/devkit8000/devkit8000.h |  373 +++++++++++++++++++++++++++++++++++
 doc/README.timll                    |   15 ++
 include/configs/devkit8000.h        |  307 ++++++++++++++++++++++++++++
 9 files changed, 921 insertions(+), 0 deletions(-)
 create mode 100644 board/timll/devkit8000/Makefile
 create mode 100644 board/timll/devkit8000/config.mk
 create mode 100644 board/timll/devkit8000/devkit8000.c
 create mode 100644 board/timll/devkit8000/devkit8000.h
 create mode 100644 doc/README.timll
 create mode 100644 include/configs/devkit8000.h

MAINTAINERS +4 -0

index 620604c..c78245f 100644
@@ -587,6 +587,10 @@ Nishant Kamat <[email protected]>
 
 	omap1610h2	ARM926EJS
 
+Frederik Kriewitz <[email protected]>
+
+	devkit8000	ARM CORTEX-A8 (OMAP3530 SoC)
+
 Sergey Kubushyn <[email protected]>
 
 	DV-EVM		ARM926EJS

MAKEALL +1 -0

index edebaea..65eb4b7 100755
@@ -575,6 +575,7 @@ LIST_ARM11="			\
 ## ARM Cortex-A8 Systems
 #########################################################################
 LIST_ARM_CORTEX_A8="		\
+	devkit8000		\
 	omap3_beagle		\
 	omap3_overo		\
 	omap3_evm		\

Makefile +3 -0

index 96cca23..0f96321 100644
@@ -3086,6 +3086,9 @@ SMN42_config	:	unconfig
 ## ARM CORTEX Systems
 #########################################################################
 
+devkit8000_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
+
 omap3_beagle_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3

board/timll/devkit8000/Makefile new file +52 -0

52 lines not on this page · raw message

board/timll/devkit8000/config.mk new file +35 -0

new file mode 100644
index 0000000..6bfcef7
@@ -0,0 +1,35 @@
+#
+# (C) Copyright 2006
+# Texas Instruments, <www.ti.com>
+#
+# (C) Copyright 2009
+# Frederik Kriewitz <[email protected]>
+#
+# DevKit8000 uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000

board/timll/devkit8000/devkit8000.c new file +131 -0

131 lines not on this page · raw message

board/timll/devkit8000/devkit8000.h new file +373 -0

373 lines not on this page · raw message

doc/README.timll new file +15 -0

new file mode 100644
index 0000000..609bf51
@@ -0,0 +1,15 @@
+DevKit8000
+==========
+
+The OMAP3 DevKit8000 from Embest/Timll is a clone of the OMAP3 beagle board
+with Ethernet and Touch Screen controller on board.
+
+For more information go to:
+http://www.embedinfo.com/English/Product/devkit8000.asp
+
+There's no real MAC address available.
+If ethaddr is not set, 5 Bytes of the OMAP Die ID will be used.
+
+Build:
+make devkit8000_config
+make

include/configs/devkit8000.h new file +307 -0

307 lines not on this page · raw message

Signature · 1 line

1.6.3.3

Dirk Behme

2009-08-23 16:02 UTC #1 lore raw

PATCH 1/1 Add support for the DevKit8000 board

Quoted 10 lines · Frederik Kriewitz

This patch adds support for the DevKit8000 board.
Signed-off-by Frederik Kriewitz <[email protected]>
---
mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000)
---
 MAINTAINERS                         |    4 +
 MAKEALL                             |    1 +
 Makefile                            |    3 +
 board/timll/devkit8000/Makefile     |   52 +++++

I'm not sure what "timll" stands for?

Depending on the result of the board directory rename discussion, I'd like to see board/devkit8000 or board/omap3devkit8000 here.

MAKEALL LIST_ARM11=" \ · line 581

Quoted 12 lines

MAKEALL +1 -0

index edebaea..65eb4b7 100755
@@ -575,6 +575,7 @@ LIST_ARM11="			\
 ## ARM Cortex-A8 Systems
 #########################################################################
 LIST_ARM_CORTEX_A8="		\
+	devkit8000		\
 	omap3_beagle		\
 	omap3_overo		\
 	omap3_evm		\

What's about "omap3_devkit8000"?

Best regards

Dirk

Frederik Kriewitz

author

2009-08-23 17:15 UTC #2 lore raw

PATCH 1/1 Add support for the DevKit8000 board

Quoted 13 lines · Dirk Behme

Quoted 11 lines · Frederik Kriewitz
This patch adds support for the DevKit8000 board.
Signed-off-by Frederik Kriewitz <[email protected]>
---
mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000)
---
 MAINTAINERS                         |    4 +
 MAKEALL                             |    1 +
 Makefile                            |    3 +
 board/timll/devkit8000/Makefile     |   52 +++++

Quoted 1 line

I'm not sure what "timll" stands for?

Timll is the vendor.

Quoted 2 lines

Depending on the result of the board directory rename discussion, I'd like to see board/devkit8000 or board/omap3devkit8000 here.

I'll send another patch, it's your choice then :)

Jean-Christophe PLAGNIOL-VILLARD

2009-08-25 05:22 UTC #3 lore raw

PATCH 1/1 Add support for the DevKit8000 board

In reply to Frederik Kriewitz

Quoted 14 lines · Frederik Kriewitz

This patch adds support for the DevKit8000 board.

Signed-off-by Frederik Kriewitz <[email protected]>

---
mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000)

---
 MAINTAINERS                         |    4 +
 MAKEALL                             |    1 +
 Makefile                            |    3 +
 board/timll/devkit8000/Makefile     |   52 +++++
 board/timll/devkit8000/config.mk    |   35 ++++
 board/timll/devkit8000/devkit8000.c |  131 ++++++++++++
 board/timll/devkit8000/devkit8000.h |  373 +++++++++++++++++++++++++++++++++++
 doc/README.timll                    |   15 ++

Quoted 8 lines

 include/configs/devkit8000.h        |  307 ++++++++++++++++++++++++++++
 9 files changed, 921 insertions(+), 0 deletions(-)
 create mode 100644 board/timll/devkit8000/Makefile
 create mode 100644 board/timll/devkit8000/config.mk
 create mode 100644 board/timll/devkit8000/devkit8000.c
 create mode 100644 board/timll/devkit8000/devkit8000.h
 create mode 100644 doc/README.timll
 create mode 100644 include/configs/devkit8000.

this one is fine
but for the next time please specify in the subject the patch version to known which one is the last

Best Regards,
J.

Jean-Christophe PLAGNIOL-VILLARD

2009-09-04 23:34 UTC #4 lore raw

PATCH 1/1 Add support for the DevKit8000 board

In reply to Frederik Kriewitz

Quoted 14 lines · Frederik Kriewitz

This patch adds support for the DevKit8000 board.

Signed-off-by Frederik Kriewitz <[email protected]>

---
mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000)

---
 MAINTAINERS                         |    4 +
 MAKEALL                             |    1 +
 Makefile                            |    3 +
 board/timll/devkit8000/Makefile     |   52 +++++
 board/timll/devkit8000/config.mk    |   35 ++++
 board/timll/devkit8000/devkit8000.c |  131 ++++++++++++
 board/timll/devkit8000/devkit8000.h |  373 +++++++++++++++++++++++++++++++++++
 doc/README.timll                    |   15 ++

Quoted 8 lines

 include/configs/devkit8000.h        |  307 ++++++++++++++++++++++++++++
 9 files changed, 921 insertions(+), 0 deletions(-)
 create mode 100644 board/timll/devkit8000/Makefile
 create mode 100644 board/timll/devkit8000/config.mk
 create mode 100644 board/timll/devkit8000/devkit8000.c
 create mode 100644 board/timll/devkit8000/devkit8000.h
 create mode 100644 doc/README.timll
 create mode 100644 include/configs/devkit8000.h

applied to u-boot-arm

Best Regards,
J.

Dirk Behme

2009-09-05 05:31 UTC #5 lore raw

PATCH 1/1 Add support for the DevKit8000 board

Dear Jean-Christophe,

Quoted 4 lines · Jean-Christophe PLAGNIOL-VILLARD

Quoted 3 lines · Frederik Kriewitz
This patch adds support for the DevKit8000 board.
Signed-off-by Frederik Kriewitz <[email protected]>

...

Quoted 1 line

 create mode 100644 include/configs/devkit8000.h

...

Quoted 1 line

applied to u-boot-arm

I think we agreed on the nclude/configs/omap3_devkit8000.h version?

Dirk