: Remove "buffer half full" check from guest_console_write
PATCH 1/1 : Remove "buffer half full" check from guest_console_write
All,
We've seen a case where booting Xen on a certain platform configured with a
serial console takes an unreasonably long time to boot (on the order of hours).
Now, on this particular piece of hardware, it was determined that the serial
firmware actually has a bug. That being said, I'm not sure that preventing boot in the face of buggy serial hardware is a reasonable course of action. Bare-metal Linux, for instance, boots fine although characters might be dropped along the way.
The problem seems to be the check in guest_console_write(), which has a
quench-type check at the top of the loop. I assume the check is to prevent the guest from completely flooding the serial console, but:
1) It seems like a layering violation; a check here can (and does) prevent the lower level serial code from doing the right thing.
2) It seems redundant since c/s 17851. That c/s added a very similar check into __serial_putc(), so I don't think we need it here anymore.
This patch just removes the check entirely. With this patch and c/s 17851 in place, the problematic hardware boots in a normal amount of time (although it still might drop characters, but I think this is the best we can do).
xen/drivers/char/console.c +0 -7
@@ -332,13 +332,6 @@ static long guest_console_write(XEN_GUESwhile ( count >0 ) { -while (serial_tx_space (sercon_handle) < (serial_txbufsz /2 ) ) - { -if (hypercall_preempt_check () ) -break ; -cpu_relax (); - } -if (hypercall_preempt_check () ) return hypercall_create_continuation( __HYPERVISOR_console_io, "iih",
_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel