Hw capabilities of the HVR-2200
**a repost because of earlier issues in getting emails to the list**
Hi Kernellabs or anyone involved with driver development of the HVR-2200...
I know this is a loooong way down the priority list of features to be added, if ever! But I'm wanting to know if the *possibility* is there 'hardware-wise' for the following:
1) h.263/mpeg4/VC-1/DivX/Xvid hardware encode of A/V-in
2) Component input for the A/V-in
3) Hw encode bypass for A/V-in
4) Is Hw encode purely for A/V-in? (hauppauge's site suggests otherwise but it may be a typo)
5) If not then questions 1) & 3) also apply to RF-in!
Here are the reference cards spec sheets again:
http://www.picamatic.com/view/5094357_75016126_P1/
http://www.picamatic.com/view/5094364_75016126_P2/
http://www.picamatic.com/view/5094375_75016207_P1/
http://www.picamatic.com/view/5094373_75016207_P2/
I would be proactive in providing feed-back (as needed) for the dev. of such features.
Most Sincerely,
Jed
Quoted 19 lines · Jed
**a repost because of earlier issues in getting emails to the list**
Hi Kernellabs or anyone involved with driver development of the HVR-2200...
I know this is a loooong way down the priority list of features to be added, if ever! But I'm wanting to know if the *possibility* is there 'hardware-wise' for the following:
1) h.263/mpeg4/VC-1/DivX/Xvid hardware encode of A/V-in
2) Component input for the A/V-in
3) Hw encode bypass for A/V-in
4) Is Hw encode purely for A/V-in? (hauppauge's site suggests otherwise but it may be a typo)
5) If not then questions 1) & 3) also apply to RF-in!Here are the reference cards spec sheets again:
http://www.picamatic.com/view/5094357_75016126_P1/
http://www.picamatic.com/view/5094364_75016126_P2/
http://www.picamatic.com/view/5094375_75016207_P1/
http://www.picamatic.com/view/5094373_75016207_P2/
Quoted 6 lines
I would be proactive in providing feed-back (as needed) for the dev. of such features.
Most Sincerely,
Jed
Just a test feel free to ignore........
Quoted 20 lines
**a repost because of earlier issues in getting emails to the list**
Hi Kernellabs or anyone involved with driver development of the HVR-2200...
I know this is a loooong way down the priority list of features to be added, if ever! But I'm wanting to know if the *possibility* is there 'hardware-wise' for the following:
1) h.263/mpeg4/VC-1/DivX/Xvid hardware encode of A/V-in
2) Component input for the A/V-in
3) Hw encode bypass for A/V-in
4) Is Hw encode purely for A/V-in? (hauppauge's site suggests otherwise but it may be a typo)
5) If not then questions 1) & 3) also apply to RF-in!Here are the reference cards spec sheets again:
http://www.picamatic.com/view/5094357_75016126_P1/
http://www.picamatic.com/view/5094364_75016126_P2/
http://www.picamatic.com/view/5094375_75016207_P1/
http://www.picamatic.com/view/5094373_75016207_P2/
Quoted 6 lines
I would be proactive in providing feed-back (as needed) for the dev. of such features.
Most Sincerely,
Jed
[Follow-up post] *Delivery issues resolved, although there's still delays of 7hrs or more being investigated with postmasters*
Attention Kernellabs devs,
I've deliberately delayed these two posts as Steve mentioned he wouldn't have time to respond for at least 1wk.
It's now been almost two weeks, do you think you might have 5-minutes to spare now? I realise you might not "know" the answer to some of my questions yet!... :-D
All the best,
Jed
Quoted 5 lines · Jed
Quoted 5 lines
**a repost because of earlier issues in getting emails to the list**
Hi Kernellabs or anyone involved with driver development of the HVR-2200...
Hello.
Quoted 7 lines
Quoted 7 lines
I know this is a loooong way down the priority list of features to be added, if ever!
But I'm wanting to know if the *possibility* is there 'hardware-wise' for the following:1) h.263/mpeg4/VC-1/DivX/Xvid hardware encode of A/V-in
Yes, this exists in hardware on the SAA7164 and therefore the HVR2200 and HVR2250.
Quoted 1 line
Quoted 1 line
2) Component input for the A/V-in
Yes, this exists on the HVR2250 product only.
Quoted 1 line
Quoted 1 line
3) Hw encode bypass for A/V-in
No idea. Regardless of whether it does or does not I wouldn't plan to add basic raw TV support to the driver, without going through the encoder.
Quoted 2 lines
Quoted 2 lines
4) Is Hw encode purely for A/V-in? (hauppauge's site suggests otherwise but it may be a typo)
Yes.
Signature · 2 lines
Steven Toth - Kernel Labs http://www.kernellabs.com
Quoted 6 lines
Quoted 4 lines
Quoted 4 lines
**a repost because of earlier issues in getting emails to the list**
Hi Kernellabs or anyone involved with driver development of the HVR-2200...
Hello.
You're starting to see me as a nemesis now aren't you? I'm really a nice person, I promise! :-D
Quoted 9 lines
Quoted 7 lines
Quoted 7 lines
I know this is a loooong way down the priority list of features to be added, if ever!
But I'm wanting to know if the *possibility* is there 'hardware-wise' for the following:1) h.263/mpeg4/VC-1/DivX/Xvid hardware encode of A/V-in
Yes, this exists in hardware on the SAA7164 and therefore the HVR2200 and HVR2250.
Thank-you.
Quoted 3 lines
Quoted 1 line
Quoted 1 line
2) Component input for the A/V-in
Yes, this exists on the HVR2250 product only.
Ah shite, are you sure?
If you look at the specs for the reference card it was there, did they take it out at the last minute?
Quoted 3 lines
Quoted 1 line
Quoted 1 line
3) Hw encode bypass for A/V-in
No idea. Regardless of whether it does or does not I wouldn't plan to add basic raw TV support to the driver, without going through the encoder.
Why do you rule it out unequivocally, is it just because I've annoyed you? :-(
The only reason I suggest this is because it'd be nice to have the option to offload encoding to some other device or to 'soft-encode'.
Of course demand for such functionality would prolly be the lowest, so it's understandable if it's the last thing implemented, if at all.
Quoted 4 lines
Quoted 2 lines
Quoted 2 lines
4) Is Hw encode purely for A/V-in? (hauppauge's site suggests otherwise but it may be a typo)
Yes.
Thank-you.
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
2) Component input for the A/V-in
Yes, this exists on the HVR2250 product only.
Ah shite, are you sure?
If you look at the specs for the reference card it was there, did they take it out at the last minute?
It's not feature Hauppauge supports on the HVR2200 today. I have a suspicion this may change but I'm neither confirming, denying or announcing anything. It would make sense to officially support component cables on the HVR2200 since the silicon supports it. If/when it does I'm sure it will be mentioned in the forums or on the HVR2200 product packaging.
Quoted 9 lines
Quoted 6 lines
Quoted 2 lines
Quoted 2 lines
3) Hw encode bypass for A/V-in
No idea. Regardless of whether it does or does not I wouldn't plan to add basic raw TV support to the driver, without going through the encoder.
Why do you rule it out unequivocally, is it just because I've annoyed you? :-(
Raw analog TV isn't a high priority feature on my mental check-list. Analog TV via the encoder is much more interesting and applicable to many people.
Signature · 2 lines
Steven Toth - Kernel Labs http://www.kernellabs.com
Quoted 9 lines
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
2) Component input for the A/V-in
Yes, this exists on the HVR2250 product only.
Ah shite, are you sure?
If you look at the specs for the reference card it was there, did they take it out at the last minute?It's not feature Hauppauge supports on the HVR2200 today. I have a suspicion this may change but I'm neither confirming, denying or announcing anything. It would make sense to officially support component cables on the HVR2200 since the silicon supports it. If/when it does I'm sure it will be mentioned in the forums or on the HVR2200 product packaging.
So I garner from that, that you don't intend to add support for anything (including extra encoding abilities that they don't support in Windows) unless Hauppauge officially does?
Quoted 10 lines
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line
3) Hw encode bypass for A/V-in
No idea. Regardless of whether it does or does not I wouldn't plan to add basic raw TV support to the driver, without going through the encoder.
Why do you rule it out unequivocally, is it just because I've annoyed you? :-(
Raw analog TV isn't a high priority feature on my mental check-list. Analog TV via the encoder is much more interesting and applicable to many people.
Fair-enough, thanks.
Quoted 15 lines · Jed
Quoted 8 lines
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
2) Component input for the A/V-in
Yes, this exists on the HVR2250 product only.
Ah shite, are you sure?
If you look at the specs for the reference card it was there, did they take it out at the last minute?Quoted 6 lines
It's not feature Hauppauge supports on the HVR2200 today. I have a suspicion this may change but I'm neither confirming, denying or announcing anything. It would make sense to officially support component cables on the HVR2200 since the silicon supports it. If/when it does I'm sure it will be mentioned in the forums or on the HVR2200 product packaging.
Quoted 3 lines
So I garner from that, that you don't intend to add support for anything (including extra encoding abilities that they don't support in Windows) unless Hauppauge officially does?
No, I was referring specifically to your component 'are you sure?' question.
I've said many times on and off this mailing list that I'd like to add support for all of the encoder a/v codecs, regardless of the windows driver and it's capabilities. Timeframe for this is unknown.
Signature · 2 lines
Steven Toth - Kernel Labs http://www.kernellabs.com
Quoted 15 lines
Quoted 15 lines
Quoted 14 lines
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
2) Component input for the A/V-in
Yes, this exists on the HVR2250 product only.
Ah shite, are you sure?
If you look at the specs for the reference card it was there, did they take it out at the last minute?It's not feature Hauppauge supports on the HVR2200 today. I have a suspicion this may change but I'm neither confirming, denying or announcing anything. It would make sense to officially support component cables on the HVR2200 since the silicon supports it. If/when it does I'm sure it will be mentioned in the forums or on the HVR2200 product packaging.
Quoted 7 lines
Quoted 3 lines
So I garner from that, that you don't intend to add support for anything (including extra encoding abilities that they don't support in Windows) unless Hauppauge officially does?
No, I was referring specifically to your component 'are you sure?' question.
I've said many times on and off this mailing list that I'd like to add support for all of the encoder a/v codecs, regardless of the windows driver and it's capabilities. Timeframe for this is unknown.
Okay thanks Steven for taking some time to address these Qns, I'm done.
Quoted 9 lines · 19/09/09 Jed wrote:
Quoted 9 lines
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
2) Component input for the A/V-in
Yes, this exists on the HVR2250 product only.
Ah shite, are you sure?
If you look at the specs for the reference card it was there, did they take it out at the last minute?It's not feature Hauppauge supports on the HVR2200 today. I have a suspicion this may change but I'm neither confirming, denying or announcing anything. It would make sense to officially support component cables on the HVR2200 since the silicon supports it. If/when it does I'm sure it will be mentioned in the forums or on the HVR2200 product packaging.
Hi Steve, when you said this is not a feature Hauppauge supports. Did you mean it's not fully enabled physically in the PCB... Or is it just something they need to add support for in the driver? If the latter do you know if their policy has changed or is about to?
Quoted 10 lines
Quoted 10 lines
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line
3) Hw encode bypass for A/V-in
No idea. Regardless of whether it does or does not I wouldn't plan to add basic raw TV support to the driver, without going through the encoder.
Why do you rule it out unequivocally, is it just because I've annoyed you? :-(
Raw analog TV isn't a high priority feature on my mental check-list. Analog TV via the encoder is much more interesting and applicable to many people.
Assuming that progress has been made on analogue to h.263/mpeg4/VC-1/DivX/Xvid via the A/V-in encoder. Is this still considered a low priority?
Has progress been made on hw encode via A/V-in?
I'm "finally" putting my entire system together soon, can't wait! Looking forward to seeing how everything has progressed. I'll be sure to do some donations once I'm up & running!
Quoted 16 lines · Jed
Quoted 8 lines · 19/09/09 Jed wrote:
Quoted 8 lines
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
2) Component input for the A/V-in
Yes, this exists on the HVR2250 product only.
Ah shite, are you sure?
If you look at the specs for the reference card it was there, did they take it out at the last minute?Quoted 6 lines
Quoted 6 lines
It's not feature Hauppauge supports on the HVR2200 today. I have a suspicion this may change but I'm neither confirming, denying or announcing anything. It would make sense to officially support component cables on the HVR2200 since the silicon supports it. If/when it does I'm sure it will be mentioned in the forums or on the HVR2200 product packaging.
Quoted 4 lines
Hi Steve, when you said this is not a feature Hauppauge supports. Did you mean it's not fully enabled physically in the PCB... Or is it just something they need to add support for in the driver? If the latter do you know if their policy has changed or is about to?
No idea, I have no answer.
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line
3) Hw encode bypass for A/V-in
No idea. Regardless of whether it does or does not I wouldn't plan to add basic raw TV support to the driver, without going through the encoder.
Why do you rule it out unequivocally, is it just because I've annoyed you? :-(
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
Raw analog TV isn't a high priority feature on my mental check-list. Analog TV via the encoder is much more interesting and applicable to many people.
Assuming that progress has been made on analogue to h.263/mpeg4/VC-1/DivX/Xvid via the A/V-in encoder. Is this still considered a low priority?
Raw analog is still very low down any list I have for the HVR22xx driver.
Quoted 5 lines
Has progress been made on hw encode via A/V-in?
I'm "finally" putting my entire system together soon, can't wait! Looking forward to seeing how everything has progressed. I'll be sure to do some donations once I'm up & running!
The current driver supports DTV only. I have no ETA for analog on the HVR22xx driver. If you need analog support then the HVR22xx isn't the right product for you.
Regards,
Signature · 3 lines
Steven Toth - Kernel Labs http://www.kernellabs.com +1.646.355.8490
*woops*
Just saw your status update from 24/01, sigh, doesn't sound good :(
http://www.kernellabs.com/blog/?p=1339
Quoted 16 lines
Quoted 16 lines
Quoted 14 lines · 19/09/09 Jed wrote:
Quoted 14 lines
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
2) Component input for the A/V-in
Yes, this exists on the HVR2250 product only.
Ah shite, are you sure?
If you look at the specs for the reference card it was there, did they take it out at the last minute?It's not feature Hauppauge supports on the HVR2200 today. I have a suspicion this may change but I'm neither confirming, denying or announcing anything. It would make sense to officially support component cables on the HVR2200 since the silicon supports it. If/when it does I'm sure it will be mentioned in the forums or on the HVR2200 product packaging.
Quoted 6 lines
Quoted 4 lines
Hi Steve, when you said this is not a feature Hauppauge supports. Did you mean it's not fully enabled physically in the PCB... Or is it just something they need to add support for in the driver? If the latter do you know if their policy has changed or is about to?
No idea, I have no answer.
Considering that in the specs for the reference card it was highlighted as part of the silicon... Wouldn't it be safe to assume that it's something that'd be unlocked by drivers?
But if that were true, what is their motivation in not wanting to enable it? (assuming they still haven't)
Quoted 20 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line
3) Hw encode bypass for A/V-in
No idea. Regardless of whether it does or does not I wouldn't plan to add basic raw TV support to the driver, without going through the encoder.
Why do you rule it out unequivocally, is it just because I've annoyed you? :-(
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
Raw analog TV isn't a high priority feature on my mental check-list. Analog TV via the encoder is much more interesting and applicable to many people.
Assuming that progress has been made on analogue to h.263/mpeg4/VC-1/DivX/Xvid via the A/V-in encoder. Is this still considered a low priority?
Raw analog is still very low down any list I have for the HVR22xx driver.
Quoted 1 line
Quoted 8 lines
Quoted 4 lines
Has progress been made on hw encode via A/V-in?
I'm "finally" putting my entire system together soon, can't wait! Looking forward to seeing how everything has progressed. I'll be sure to do some donations once I'm up & running!The current driver supports DTV only. I have no ETA for analog on the HVR22xx driver. If you need analog support then the HVR22xx isn't the right product for you.
Regards,
I don't need analogue for tuning purposes but for A/V-in it'd be mighty handy.
If you've got anything that's very rough I'm happy to be your lab-rat?
Do you know of any dual hybrid DVB-T tuner cards that do have functioning A/V-in, or should I forget such devices for that purpose?
Thank-you.
Quoted 16 lines
Quoted 16 lines
Quoted 14 lines · 19/09/09 Jed wrote:
Quoted 14 lines
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
2) Component input for the A/V-in
Yes, this exists on the HVR2250 product only.
Ah shite, are you sure?
If you look at the specs for the reference card it was there, did they take it out at the last minute?It's not feature Hauppauge supports on the HVR2200 today. I have a suspicion this may change but I'm neither confirming, denying or announcing anything. It would make sense to officially support component cables on the HVR2200 since the silicon supports it. If/when it does I'm sure it will be mentioned in the forums or on the HVR2200 product packaging.
Quoted 6 lines
Quoted 4 lines
Hi Steve, when you said this is not a feature Hauppauge supports. Did you mean it's not fully enabled physically in the PCB... Or is it just something they need to add support for in the driver? If the latter do you know if their policy has changed or is about to?
No idea, I have no answer.
Considering that in the specs for the reference card it was highlighted as part of the silicon... Wouldn't it be safe to assume that it's something that'd be unlocked by drivers?
But if that were true, what is their motivation in not wanting to enable it? (assuming they still haven't)
Quoted 28 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line
3) Hw encode bypass for A/V-in
No idea. Regardless of whether it does or does not I wouldn't plan to add basic raw TV support to the driver, without going through the encoder.
Why do you rule it out unequivocally, is it just because I've annoyed you? :-(
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
Raw analog TV isn't a high priority feature on my mental check-list. Analog TV via the encoder is much more interesting and applicable to many people.
Assuming that progress has been made on analogue to h.263/mpeg4/VC-1/DivX/Xvid via the A/V-in encoder. Is this still considered a low priority?
Raw analog is still very low down any list I have for the HVR22xx driver.
Quoted 5 lines
Has progress been made on hw encode via A/V-in?
I'm "finally" putting my entire system together soon, can't wait! Looking forward to seeing how everything has progressed. I'll be sure to do some donations once I'm up & running!The current driver supports DTV only. I have no ETA for analog on the HVR22xx driver. If you need analog support then the HVR22xx isn't the right product for you.
Quoted 6 lines · Jed
Considering that in the specs for the reference card it was highlighted as part of the silicon... Wouldn't it be safe to assume that it's something that'd be unlocked by drivers?
But if that were true, what is their motivation in not wanting to enable it? (assuming they still haven't)
The features of a given piece of silicon do not always match what a company has ultimately licensed. This is especially true for things like codec support which can have significant royalties that have to be paid. Hence it's possible that while the chip *in theory* could support some particular codec, that doesn't mean that the firmware that ultimately got licensed has the necessary support.
Regarding component support, it's entirely possible that although the chip supports it, it may have been cost prohibitive to put the supporting hardware on the PCB. It's ultimately up to the product vendor to decide what subset of the functionality on the reference design to ship with.
Of course, everything I said in the above is complete speculation (based on my own previous experience working for a company that makes hardware), as I have no actual knowledge of why they chose to take the approach they did.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 9 lines · 19/09/09 Jed wrote:
Quoted 9 lines
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
2) Component input for the A/V-in
Yes, this exists on the HVR2250 product only.
Ah shite, are you sure?
If you look at the specs for the reference card it was there, did they take it out at the last minute?It's not feature Hauppauge supports on the HVR2200 today. I have a suspicion this may change but I'm neither confirming, denying or announcing anything. It would make sense to officially support component cables on the HVR2200 since the silicon supports it. If/when it does I'm sure it will be mentioned in the forums or on the HVR2200 product packaging.
Hi Steve, when you said this is not a feature Hauppauge supports. Did you mean it's not fully enabled physically in the PCB... Or is it just something they need to add support for in the driver? If the latter do you know if their policy has changed or is about to?
Quoted 10 lines
Quoted 10 lines
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line
3) Hw encode bypass for A/V-in
No idea. Regardless of whether it does or does not I wouldn't plan to add basic raw TV support to the driver, without going through the encoder.
Why do you rule it out unequivocally, is it just because I've annoyed you? :-(
Raw analog TV isn't a high priority feature on my mental check-list. Analog TV via the encoder is much more interesting and applicable to many people.
Assuming that progress has been made on analogue to h.263/mpeg4/VC-1/DivX/Xvid via the A/V-in encoder. Is this still considered a low priority?
Has progress been made on hw encode via A/V-in?
I'm "finally" putting my entire system together soon, can't wait! Looking forward to seeing how everything has progressed. I'll be sure to do some donations once I'm up & running!
Quoted 20 lines
**a repost because of earlier issues in getting emails to the list**
Hi Kernellabs or anyone involved with driver development of the HVR-2200...
I know this is a loooong way down the priority list of features to be added, if ever! But I'm wanting to know if the *possibility* is there 'hardware-wise' for the following:
1) h.263/mpeg4/VC-1/DivX/Xvid hardware encode of A/V-in
2) Component input for the A/V-in
3) Hw encode bypass for A/V-in
4) Is Hw encode purely for A/V-in? (hauppauge's site suggests otherwise but it may be a typo)
5) If not then questions 1) & 3) also apply to RF-in!Here are the reference cards spec sheets again:
http://www.picamatic.com/view/5094357_75016126_P1/
http://www.picamatic.com/view/5094364_75016126_P2/
http://www.picamatic.com/view/5094375_75016207_P1/
http://www.picamatic.com/view/5094373_75016207_P2/
Quoted 6 lines
I would be proactive in providing feed-back (as needed) for the dev. of such features.
Most Sincerely,
Jed
[Follow-up post] *Delivery issues resolved, although there's still delays of 7hrs or more being investigated with postmasters*
Attention Kernellabs devs,
I've deliberately delayed these two posts as Steve mentioned he wouldn't have time to respond for at least 1wk.
It's now been almost two weeks, do you think you might have 5-minutes to spare now? I realise you might not "know" the answer to some of my questions yet!... :-)
All the best,
Jed
Quoted 27 lines
Quoted 19 lines
**a repost because of earlier issues in getting emails to the list**
Hi Kernellabs or anyone involved with driver development of the HVR-2200...
I know this is a loooong way down the priority list of features to be added, if ever! But I'm wanting to know if the *possibility* is there 'hardware-wise' for the following:
1) h.263/mpeg4/VC-1/DivX/Xvid hardware encode of A/V-in
2) Component input for the A/V-in
3) Hw encode bypass for A/V-in
4) Is Hw encode purely for A/V-in? (hauppauge's site suggests otherwise but it may be a typo)
5) If not then questions 1) & 3) also apply to RF-in!Here are the reference cards spec sheets again:
http://www.picamatic.com/view/5094357_75016126_P1/
http://www.picamatic.com/view/5094364_75016126_P2/
http://www.picamatic.com/view/5094375_75016207_P1/
http://www.picamatic.com/view/5094373_75016207_P2/Quoted 6 lines
I would be proactive in providing feed-back (as needed) for the dev. of such features.
Most Sincerely,
Jed[Follow-up post] *Delivery issues resolved, although there's still delays of 7hrs or more being investigated with postmasters*
Quoted 9 lines
Attention Kernellabs devs,
I've deliberately delayed these two posts as Steve mentioned he wouldn't have time to respond for at least 1wk.It's now been almost two weeks, do you think you might have 5-minutes to spare now? I realise you might not "know" the answer to some of my questions yet!... :-)
All the best,
Jed
woops sorry, double post, well that was certainly very quick! No more issues with delays apparent...