bitbanging driver for my gpio board
Hi all,
I've got a digital IO board sitting on a ISA bus in an industrial x86 computer. And I've got a simple driver with ioctl interface for toggling the IO pins Hi and Low and it works fine.
Now I'm about to develop a bitbanging SPI driver with the help of drivers/spi/spi_bitbang.c. Unfortunately I don't understand how to glue it with my GPIO driver, more precisely - how to register a new SPI driver.
The other modules in drivers/spi seem to use platform_driver_register() or spi_register_driver() to get their blah_probe() called and then they go from there. However, whatever I tried, my _probe() method never gets called. The module is as simple as this (remove/exit methods omitted from this email):
static int inro_spi_probe(struct spi_device *dev)
{
printk(KERN_INFO PFX "inro_spi_probe() called\n");
return -ENODEV;
}
static struct spi_driver inro_spi_drv = {
.probe = inro_spi_probe,
.driver = { .name = "inro_spi", .owner = THIS_MODULE, },
};
static int __init inro_spi_init(void)
{
printk(KERN_INFO PFX "inro_spi_init() called\n");
return spi_register_driver(&inro_spi_drv);
}
module_init(inro_spi_init);I tried spi_register_driver() as well as platform_driver_register() both to no avail. I assume I would need some support in xxx_platform_data for platform_driver_register() to work but since we're running an unmodified Debian kernel on x86 I can't do that. What needs to be done for spi_register_driver() to call my _probe() I have no idea.
So my question is how to register/init the module and make it available to the SPI subsystem? I somehow can't figure it out :-(
Thanks for any hints!
Michal
------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 6 lines · Michal Ludvig
Hi all,
I've got a digital IO board sitting on a ISA bus in an industrial x86 computer. And I've got a simple driver with ioctl interface for toggling the IO pins Hi and Low and it works fine.
You might just try using drivers/spi/spi_gpio.c.
Quoted 34 lines
Now I'm about to develop a bitbanging SPI driver with the help of
drivers/spi/spi_bitbang.c. Unfortunately I don't understand how to glue it with my GPIO driver, more precisely - how to register a new SPI driver.The other modules in
drivers/spiseem to useplatform_driver_register()orspi_register_driver()to get theirblah_probe()called and then they go from there. However, whatever I tried, my_probe()method never gets called. The module is as simple as this (remove/exit methods omitted from this email):static int inro_spi_probe(struct spi_device *dev) { printk(KERN_INFO PFX "inro_spi_probe() called\n"); return -ENODEV; } static struct spi_driver inro_spi_drv = { .probe = inro_spi_probe, .driver = { .name = "inro_spi", .owner = THIS_MODULE, }, }; static int __init inro_spi_init(void) { printk(KERN_INFO PFX "inro_spi_init() called\n"); return spi_register_driver(&inro_spi_drv); } module_init(inro_spi_init);I tried
spi_register_driver()as well asplatform_driver_register()both to no avail. I assume I would need some support inxxx_platform_dataforplatform_driver_register()to work but since we're running an unmodified Debian kernel on x86 I can't do that. What needs to be done forspi_register_driver()to call my_probe()I have no idea.
Quoted 3 lines
So my question is how to register/init the module and make it available to the SPI subsystem? I somehow can't figure it out :-(
I think you will need a platform_device_register() before spi_register_driver() or platform_driver_register() will work. The "device" needs to be present before the "driver" can hook to it.
Quoted 3 lines
Thanks for any hints!
Michal
Regards,
Hartley
------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf