qt4-embedded & tslib
Hi,
in order to get gt4-embedded working with tslib, I had to do the following change.
Without this, tslib loads properly the module_raw (input in my case) but none of the module (pthres, linear & co) defined in ts.conf (despite the fact ts_test & co are running fine).
Eric
recipes/qt4/qt4-embedded.inc +2 -4
@@ -4,7 +4,7 @@ LICENSE = "GPL QPL" PRIORITY = "optional" HOMEPAGE = "http://www.trolltech.com" DEPENDS += "directfb tslib" -INC_PR = "r14" +INC_PR = "r15" QT_BASE_NAME ?= "qt4-embedded" QT_BASE_LIB ?= "libqt-embedded"
@@ -30,7 +30,7 @@ QT_CONFIG_FLAGS += " \ -qtlibinfix ${QT_LIBINFIX} \ -qt-decoration-styled -plugin-decoration-default -plugin-decoration-windows \ -plugin-gfx-transformed -plugin-gfx-qvfb -plugin-gfx-vnc -plugin-gfx-directfb \ - -plugin-mouse-tslib -qt-mouse-pc -qt-mouse-qvfb \ + -qt-mouse-tslib -qt-mouse-pc -qt-mouse-qvfb \ -qt-kbd-tty -qt-kbd-usb -qt-kbd-qvfb \
-DQT_KEYPAD_NAVIGATION \
"Quoted 7 lines · On Sunday 06 September 2009 14:31:36 Eric Bénard wrote:
Hi,
in order to get gt4-embedded working with tslib, I had to do the following change.
Without this, tslib loads properly themodule_raw(input in my case) but none of the module (pthres, linear & co) defined in ts.conf (despite the factts_test& co are running fine).
Please google for the QWS_MOUSE_PROTO environement variable... tslib support is built as a plugin and Qt needs to be instructed to load it.
regards
z.
Quoted 7 lines · Holger Hans Peter Freyther
Quoted 3 lines · On Sunday 06 September 2009 14:31:36 Eric Bénard wrote:
Without this, tslib loads properly the
module_raw(input in my case) but none of the module (pthres, linear & co) defined in ts.conf (despite the factts_test& co are running fine).Please google for the
QWS_MOUSE_PROTOenvironement variable... tslib support is built as a plugin and Qt needs to be instructed to load it.
of course, without this variable it's not loaded at all.
But even with this variable, it doesn't work for me with -plugin-mouse-tslib but works with -qt-mouse-tslib. I tried :
tslib:/dev/input/event0 & tslib:/dev/input/touchscreen0
In fact, the module_raw (input) is properly loaded (which means QT was instructed by QWS_MOUSE_PROTO to use tslib and TSLIB_PLUGINDIR is properly set) but the other modules (pthres, linear & co) are not properly loaded (from what I saw with strace they are found, opened, and closed). If I comment out all the modules (not module_raw) from ts.conf everything is properly loaded but of course tslib gives raw values to QT so touchscreen is unusable.
Eric
Quoted 14 lines · Eric Bénard
Quoted 7 lines · Holger Hans Peter Freyther
Quoted 3 lines · On Sunday 06 September 2009 14:31:36 Eric Bénard wrote:
Without this, tslib loads properly the
module_raw(input in my case) but none of the module (pthres, linear & co) defined in ts.conf (despite the factts_test& co are running fine).Please google for the
QWS_MOUSE_PROTOenvironement variable... tslib support is built as a plugin and Qt needs to be instructed to load it.of course, without this variable it's not loaded at all. But even with this variable, it doesn't work for me with -plugin-mouse-tslib but works with -qt-mouse-tslib. I tried :
tslib:/dev/input/event0 & tslib:/dev/input/touchscreen0
Quoted 3 lines
In fact, the
module_raw(input) is properly loaded (which means QT was instructed byQWS_MOUSE_PROTOto use tslib andTSLIB_PLUGINDIRis properly set) but the other modules (pthres, linear & co) are not properly loaded (from what I saw with strace they are found, opened, and closed). If I comment out all the modules (notmodule_raw) from ts.conf everything is properly loaded but of course tslib gives raw values to QT so touchscreen is unusable.Eric
Actually, the problem is that tslib is linked incorrectly.
The pthres, linear, etc. modules are not linked to libts so theyre missing symbols when an attempt is made to load them. To confirm, do
LD_PRELOAD=/usr/lib/libts-1.0.so.0 <args>
tslib modules will resolve symbols properly so tslib will work.
A quick patch to tslib to link those modules against libts is below. A little dirty linking against the static libs, but it works!
Add to tslib_1.0.bb SRC_URI.
~Matt
plugins/Makefile.am +4 -0
@@ -107,15 +107,19 @@ pluginexec_LTLIBRARIES = \ variance_la_SOURCES = variance.c variance_la_LDFLAGS = -module $(LTVSN) +variance_la_LIBADD = $(top_builddir)/src/libts.la dejitter_la_SOURCES = dejitter.c dejitter_la_LDFLAGS = -module $(LTVSN) +dejitter_la_LIBADD = $(top_builddir)/src/libts.la linear_la_SOURCES = linear.c linear_la_LDFLAGS = -module $(LTVSN) +linear_la_LIBADD = $(top_builddir)/src/libts.la pthres_la_SOURCES = pthres.c pthres_la_LDFLAGS = -module $(LTVSN) +pthres_la_LIBADD = $(top_builddir)/src/libts.la # hw access corgi_la_SOURCES = corgi-raw.c
Hi Matthew,
Quoted 2 lines · Matthew Dombroski
Actually, the problem is that tslib is linked incorrectly.
The pthres, linear, etc. modules are not linked to libts so theyre missing symbols when an attempt is made to load them.
ts_calibrate & ts_test are working fine : doesn't is mean the modules are properly linked ?
Quoted 6 lines
To confirm, do
LD_PRELOAD=/usr/lib/libts-1.0.so.0 <args>
tslib modules will resolve symbols properly so tslib will work.
I'll try this and tell you the result.
Thanks
Eric
Quoted 7 lines · Eric Bénard
Hi Matthew,
Quoted 2 lines · Matthew Dombroski
Actually, the problem is that tslib is linked incorrectly.
The pthres, linear, etc. modules are not linked to libts so theyre missing symbols when an attempt is made to load them.
ts_calibrate&ts_testare working fine : doesn't is mean the modules are properly linked ?
ldd says not:
$ ldd dejitter.so libc.so.6 => /lib/libc.so.6 (0x4000a000) /lib/ld-linux.so.3 (0x2a000000)
With my patch:
$ ldd dejitter.so libts-1.0.so.0 => /usr/lib/libts-1.0.so.0 (0x4000a000) libdl.so.2 => /lib/libdl.so.2 (0x40014000) libc.so.6 => /lib/libc.so.6 (0x4001f000) /lib/ld-linux.so.3
I'm not sure why Qt is the only place it fails (unlinked). My opinion is that linking properly is technically better.
~Matt
Quoted 19 lines · On Thursday 10 September 2009 00:02:07 Matthew Dombroski wrote:
Quoted 9 lines · Eric Bénard
Hi Matthew,
Quoted 3 lines · Matthew Dombroski
Actually, the problem is that tslib is linked incorrectly. The pthres, linear, etc. modules are not linked to libts so theyre missing symbols when an attempt is made to load them.
ts_calibrate&ts_testare working fine : doesn't is mean the modules are properly linked ?ldd says not:
$ ldd dejitter.so libc.so.6 => /lib/libc.so.6 (0x4000a000) /lib/ld-linux.so.3 (0x2a000000)With my patch:
Quoted 8 lines
$ ldd dejitter.so libts-1.0.so.0 => /usr/lib/libts-1.0.so.0 (0x4000a000) libdl.so.2 => /lib/libdl.so.2 (0x40014000) libc.so.6 => /lib/libc.so.6 (0x4001f000) /lib/ld-linux.so.3I'm not sure why Qt is the only place it fails (unlinked). My opinion is that linking properly is technically better.
Can you provide us with the output of the failure?
Quoted 29 lines · Holger Hans Peter Freyther
Quoted 27 lines · On Thursday 10 September 2009 00:02:07 Matthew Dombroski wrote:
Quoted 11 lines · Eric Bénard
Hi Matthew,
Quoted 4 lines · Matthew Dombroski
Actually, the problem is that tslib is linked incorrectly. The pthres, linear, etc. modules are not linked to libts so theyre missing symbols when an attempt is made to load them.
ts_calibrate&
ts_testare working fine : doesn't is mean the modules are properly linked ?ldd says not:
$ ldd dejitter.so libc.so.6 => /lib/libc.so.6 (0x4000a000) /lib/ld-linux.so.3 (0x2a000000)With my patch:
$ ldd dejitter.so libts-1.0.so.0 => /usr/lib/libts-1.0.so.0 (0x4000a000) libdl.so.2 => /lib/libdl.so.2 (0x40014000) libc.so.6 => /lib/libc.so.6 (0x4001f000) /lib/ld-linux.so.3
Quoted 3 lines
Quoted 3 lines
I'm not sure why Qt is the only place it fails (unlinked). My opinion is that linking properly is technically better.
Hmm... tslib svn has fixed it anyway.
See http://svn.berlios.de/viewcvs/tslib/trunk/tslib/plugins/Makefile.am?revision=56&view=markup
Quoted 2 lines
Can you provide us with the output of the failure?
runtime failure:
# app -qws Couldnt load module pthres QWSTslibMouseHandlerPrivate: ts_config() failed with error: 'No such file or directory' Please check your tslib installation!
My tslib installation is fine.
~Matt
Quoted 11 lines · Matthew Dombroski
Quoted 2 lines · Holger Hans Peter Freyther
Can you provide us with the output of the failure?
runtime failure:
# app -qws Couldnt load module pthres QWSTslibMouseHandlerPrivate: ts_config() failed with error: 'No such file or directory' Please check your tslib installation!
same thing here. I'll send you the strace later.
Eric
PATCH 1/1 qt4-embedded & tslib
In reply to Matthew DombroskiHi,
Quoted 11 lines · Matthew Dombroski
Actually, the problem is that tslib is linked incorrectly.
The pthres, linear, etc. modules are not linked to libts so theyre missing symbols when an attempt is made to load them. To confirm, doLD_PRELOAD=/usr/lib/libts-1.0.so.0 <args>
tslib modules will resolve symbols properly so tslib will work.
A quick patch to tslib to link those modules against libts is below. A little dirty linking against the static libs, but it works!
in fact, the patch you sent on the list was integrated into tslib in november 2008 :
http://svn.berlios.de/viewcvs/tslib/trunk/tslib/plugins/Makefile.am?r1=51&r2=56
Please find attached a patch to add this patch to the tslib's recipe.
Best regards
Eric
recipes/tslib/tslib/tslib-pluginsld.patch new file +36 -0
@@ -0,0 +1,36 @@ + plugins/Makefile.am | 5 +++++ + 1 files changed, 5 insertions(+), 0 deletions(-) + +diff --git a/plugins/Makefile.am b/plugins/Makefile.am +index 3b902c2..4c4ef8b 100644 +--- a/plugins/Makefile.am ++++ b/plugins/Makefile.am +@@ -114,15 +114,19 @@ pluginexec_LTLIBRARIES = \ + + variance_la_SOURCES = variance.c + variance_la_LDFLAGS = -module $(LTVSN) ++variance_la_LIBADD = $(top_builddir)/src/libts.la + + dejitter_la_SOURCES = dejitter.c + dejitter_la_LDFLAGS = -module $(LTVSN) ++dejitter_la_LIBADD = $(top_builddir)/src/libts.la + + linear_la_SOURCES = linear.c + linear_la_LDFLAGS = -module $(LTVSN) ++linear_la_LIBADD = $(top_builddir)/src/libts.la + + pthres_la_SOURCES = pthres.c + pthres_la_LDFLAGS = -module $(LTVSN) ++pthres_la_LIBADD = $(top_builddir)/src/libts.la + + # hw access + corgi_la_SOURCES = corgi-raw.c +@@ -148,6 +152,7 @@ tatung_la_LDFLAGS = -module $(LTVSN) + + input_la_SOURCES = input-raw.c + input_la_LDFLAGS = -module $(LTVSN) ++input_la_LIBADD = $(top_builddir)/src/libts.la + + linear_h2200_la_SOURCES = linear-h2200.c + linear_h2200_la_LDFLAGS = -module $(LTVSN) +
recipes/tslib/tslib_1.0.bb +3 -2
@@ -1,6 +1,7 @@ SRC_URI = "http://download.berlios.de/tslib/${BP}.tar.bz2 \ file://fix_version.patch;patch=1 \ - file://tslib-nopressure.patch;patch=1" -PR = "${INC_PR}.2" + file://tslib-nopressure.patch;patch=1 \ + file://tslib-pluginsld.patch;patch=1" +PR = "${INC_PR}.3" include tslib.inc
Quoted 20 lines · On Thursday 24 September 2009 21:02:10 Eric Bénard wrote:
Hi,
Quoted 11 lines · Matthew Dombroski
Actually, the problem is that tslib is linked incorrectly. The pthres, linear, etc. modules are not linked to libts so theyre missing symbols when an attempt is made to load them. To confirm, do
LD_PRELOAD=/usr/lib/libts-1.0.so.0 <args>
tslib modules will resolve symbols properly so tslib will work.
A quick patch to tslib to link those modules against libts is below. A little dirty linking against the static libs, but it works!
in fact, the patch you sent on the list was integrated into tslib in november 2008 :
http://svn.berlios.de/viewcvs/tslib/trunk/tslib/plugins/Makefile.am?r1=51&r
2=56
Quoted 5 lines
Please find attached a patch to add this patch to the tslib's recipe.
Best regards
Eric
PS: This will be unlikely tracked by patchwork. Could you try in the future to send a patch from git format-patch and add a signed-off-by line so landing the patch will be more easy.
Quoted 2 lines · Holger Hans Peter Freyther
PS: This will be unlikely tracked by patchwork. Could you try in the future to send a patch from git format-patch and add a signed-off-by line so landing the patch will be more easy.
OK I'll do for the next patch
Thanks,
Eric