Skip to contentSkip to conversation

TI DaVinci DM646x: Adding initial support for DM6467 EVM

PATCH New s-paulraj at ti.com 3 participants 4 messages Oct 2, 2009 Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 TI DaVinci DM646x: Adding initial support for DM6467 EVM

From: Sandeep Paulraj <[email protected]>

This patch adds the initial support for DM6467 EVM.
Other features like NET and NAND support will be added as follow up patches.

---
There are multiple flavours of the DM646x. The newest DM646x SOC can operate at 1 GHz. The DM6467 EVM from Spectrum Digital can be used for both speed grades of the DM646x SOC . The only change on the EVM being an oscilator that operated at a higher frequency. The same board file will be used to support both SOC's. Support for this feature will be added as follow up patches.

Patches will also be sent to enable EMAC, NAND and other features.

 Makefile                            |    3 +
 board/davinci/dm6467evm/Makefile    |   52 ++++++++++++++
 board/davinci/dm6467evm/config.mk   |    2 +
 board/davinci/dm6467evm/dm6467evm.c |   31 ++++++++
 include/configs/davinci_dm6467evm.h |  131 +++++++++++++++++++++++++++++++++++
 5 files changed, 219 insertions(+), 0 deletions(-)
 create mode 100644 board/davinci/dm6467evm/Makefile
 create mode 100644 board/davinci/dm6467evm/config.mk
 create mode 100644 board/davinci/dm6467evm/dm6467evm.c
 create mode 100644 include/configs/davinci_dm6467evm.h
Makefile +3 -0
index 0b61d05..dc797b0 100644
@@ -2962,6 +2962,9 @@ davinci_dm355evm_config :	unconfig
 davinci_dm365evm_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
 
+davinci_dm6467evm_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
+
 imx27lite_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
 
board/davinci/dm6467evm/Makefile new file +52 -0

52 lines not on this page · raw message

board/davinci/dm6467evm/config.mk new file +2 -0
new file mode 100644
index 0000000..ca801c2
@@ -0,0 +1,2 @@
+#Provide at least 16MB spacing between us and the Linux Kernel image
+TEXT_BASE = 0x81080000
board/davinci/dm6467evm/dm6467evm.c new file +31 -0
new file mode 100644
index 0000000..9605818
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
include/configs/davinci_dm6467evm.h new file +131 -0

131 lines not on this page · raw message

Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 1/1 TI DaVinci DM646x: Adding initial support for DM6467 EVM

Quoted 13 lines · s-paulraj at ti.com

From: Sandeep Paulraj <[email protected]>

This patch adds the initial support for DM6467 EVM.
Other features like NET and NAND support will be added as follow up patches.

---
There are multiple flavours of the DM646x. The newest DM646x SOC can operate at 1 GHz. The DM6467 EVM from Spectrum Digital can be used for both speed grades of the DM646x SOC . The only change on the EVM being an oscilator that operated at a higher frequency. The same board file will be used to support both SOC's. Support for this feature will be added as follow up patches.

Quoted 2 lines

Patches will also be sent to enable EMAC, NAND and other features.

 Makefile                            |    3 +

Needs an addition to MAKEALL and optionally Maintainers

Quoted 133 lines
 board/davinci/dm6467evm/Makefile    |   52 ++++++++++++++
 board/davinci/dm6467evm/config.mk   |    2 +
 board/davinci/dm6467evm/dm6467evm.c |   31 ++++++++
 include/configs/davinci_dm6467evm.h |  131 +++++++++++++++++++++++++++++++++++
 5 files changed, 219 insertions(+), 0 deletions(-)
 create mode 100644 board/davinci/dm6467evm/Makefile
 create mode 100644 board/davinci/dm6467evm/config.mk
 create mode 100644 board/davinci/dm6467evm/dm6467evm.c
 create mode 100644 include/configs/davinci_dm6467evm.h
Makefile +3 -0
index 0b61d05..dc797b0 100644
@@ -2962,6 +2962,9 @@ davinci_dm355evm_config :	unconfig
 davinci_dm365evm_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
 
+davinci_dm6467evm_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
+
 imx27lite_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
 
board/davinci/dm6467evm/Makefile new file +52 -0
new file mode 100644
index 0000000..26b0705
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <[email protected]>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o
+SOBJS	:=
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
board/davinci/dm6467evm/config.mk new file +2 -0
new file mode 100644
index 0000000..ca801c2
@@ -0,0 +1,2 @@
+#Provide at least 16MB spacing between us and the Linux Kernel image
+TEXT_BASE = 0x81080000
board/davinci/dm6467evm/dm6467evm.c new file +31 -0
new file mode 100644
index 0000000..9605818
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
include/configs/davinci_dm6467evm.h new file +0 -0
new file mode 100644
index 0000000..c23d533

include/configs/davinci_dm6467evm.h line 2

Quoted 2 lines
include/configs/davinci_dm6467evm.h new file +2 -0
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/

Above copyright did not have the http.
You should be consistent.
Add or remove, your choice.

Quoted 19 lines
include/configs/davinci_dm6467evm.h new file +19 -0
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H

include/configs/davinci_dm6467evm.h line 31

Quoted 10 lines
include/configs/davinci_dm6467evm.h new file +10 -0
+
+/* Spectrum Digital TMS320DM6467 EVM board */
+#define DAVINCI_DM6467EVM
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/* SoC Configuration */
+#define CONFIG_ARM926EJS				/* arm926ejs CPU */
+#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */

Is there a logical register #define you could use instead of the magic number?

Quoted 30 lines
include/configs/davinci_dm6467evm.h new file +30 -0
+#define CONFIG_SYS_HZ_CLOCK		27000000
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SOC_DM646X
+
+/* EEPROM definitions for EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
+
+/* Memory Info */
+#define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* 1 MiB */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* initial data */
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x81000000	/* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_STACKSIZE		(256 << 10)	/* 256 KiB */
+#define PHYS_SDRAM_1			0x80000000	/* DDR Start */
+#define PHYS_SDRAM_1_SIZE		(256 << 20)	/* DDR size 256MB */
+
+/* Linux interfacing */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_SYS_BARGSIZE		1024		/* Bootarg Size */
+#define CONFIG_SYS_LOAD_ADDR		0x80700000	/* kernel address */
+
+/* Serial Driver info */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	4

include/configs/davinci_dm6467evm.h line 71

Quoted 10 lines
include/configs/davinci_dm6467evm.h new file +10 -0
+#define CONFIG_SYS_NS16550_COM1		0x01c20000
+#define CONFIG_SYS_NS16550_CLK		24000000
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* I2C Configuration */
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CONFIG_SYS_I2C_SPEED		80000

This speed is unusual.
davinci_sonata.h has a comment that it had a silicon bug with 100k Could the same comment be applied here ?

Quoted 10 lines
include/configs/davinci_dm6467evm.h new file +10 -0
+#define CONFIG_SYS_I2C_SLAVE		10
+
+/* Flash & Environment */
+#define CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_SYS_USE_NAND
+#define CONFIG_NAND_DAVINCI
+#undef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KiB */
+#define CONFIG_SYS_NAND_BASE_LIST	{0x42000000, }

include/configs/davinci_dm6467evm.h line 91

Quoted 10 lines
include/configs/davinci_dm6467evm.h new file +10 -0
+#define CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_ENV_OFFSET		0
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE			(4 << 10)	/* 4 KiB */
+#endif
+
+/* U-Boot general configuration */
+#undef	CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */

There is a TAB between #undef and CONFIG_USB_IRQ.
Other undef's here use a space.

Quoted 6 lines
include/configs/davinci_dm6467evm.h new file +6 -0
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
+#define CONFIG_SYS_PROMPT	"DM6467 EVM > "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_PBSIZE		\
+		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)

include/configs/davinci_dm6467evm.h line 107

Quoted 10 lines
include/configs/davinci_dm6467evm.h new file +10 -0
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_BOOTCOMMAND   		"source 0x82080000; dhcp; bootm"

3 spaces at the end of CONFIG_BOOTCOMMAND can be removed.

Quoted 14 lines
include/configs/davinci_dm6467evm.h new file +14 -0
+#define CONFIG_BOOTARGS		\
+		"mem=120M console=ttyS0,115200n8 " \
+		"root=/dev/hda1 rw noinitrd ip=dhcp"
+
+/* U-Boot commands */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_BDI

include/configs/davinci_dm6467evm.h line 131

Quoted 10 lines
include/configs/davinci_dm6467evm.h new file +10 -0
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#ifdef CONFIG_SYS_USE_NAND
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+#endif
+
+#endif /* __CONFIG_H */
+

Tom

#2 lore raw

PATCH 1/1 TI DaVinci DM646x: Adding initial support for DM6467 EVM

Quoted 6 lines
Quoted 4 lines

Patches will also be sent to enable EMAC, NAND and other features.

 Makefile                            |    3 +

Needs an addition to MAKEALL and optionally Maintainers

Ok I will add

Quoted 11 lines

Review

Quoted 1 line
(quoted diff) +0 -0

b/include/configs/davinci_dm6467evm.h

include/configs/davinci_dm6467evm.h line 2

Quoted 7 lines

new file mode 100644
index 0000000..c23d533

include/configs/davinci_dm6467evm.h new file +2 -0
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated -

http://www.ti.com/

Quoted 3 lines

Above copyright did not have the http.
You should be consistent.
Add or remove, your choice.

Ok I will rectify

Quoted 7 lines

include/configs/davinci_dm6467evm.h line 31

Quoted 4 lines
include/configs/davinci_dm6467evm.h new file +4 -0
+
+/* SoC Configuration */
+#define CONFIG_ARM926EJS				/* arm926ejs CPU */
+#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */

Is there a logical register #define you could use instead of the magic number?

I can include the hardware.h and get the value from there, but the way the hardware.h for DaVinci has evolved over the years, including it in the config will result in compilation failure. I'll add this to my TODO list and send in a patch to clean up for all DaVinci SOC's the moment I get some free cycles.

Quoted 7 lines

include/configs/davinci_dm6467evm.h line 71

Quoted 5 lines
include/configs/davinci_dm6467evm.h new file +5 -0
+
+/* I2C Configuration */
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CONFIG_SYS_I2C_SPEED		80000

This speed is unusual.

The same speed has been used with a slightly older version of U-boot and has worked fine

Quoted 2 lines

davinci_sonata.h has a comment that it had a silicon bug with 100k Could the same comment be applied here ?

I don't believe so

Quoted 5 lines

include/configs/davinci_dm6467evm.h line 91

Quoted 2 lines
include/configs/davinci_dm6467evm.h new file +2 -0
+/* U-Boot general configuration */
+#undef	CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */

There is a TAB between #undef and CONFIG_USB_IRQ.
Other undef's here use a space.

Ok will fix.

Quoted 6 lines

include/configs/davinci_dm6467evm.h

Quoted 5 lines
include/configs/davinci_dm6467evm.h new file +3 -0
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
+#define CONFIG_SYS_PROMPT	"DM6467 EVM > "	/* Monitor Command Prompt

*/

Quoted 15 lines

include/configs/davinci_dm6467evm.h line 107

Quoted 13 lines
include/configs/davinci_dm6467evm.h new file +13 -0
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_PBSIZE		\
+		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_BOOTCOMMAND   		"source 0x82080000; dhcp; bootm"

3 spaces at the end of CONFIG_BOOTCOMMAND can be removed.

Will fix

Quoted 1 line

Tom

Thanks,
Sandeep

#3 lore raw

PATCH 1/1 TI DaVinci DM646x: Adding initial support for DM6467 EVM

Quoted 1 line · Sandeep

<snip>

Quoted 11 lines
Quoted 7 lines

include/configs/davinci_dm6467evm.h line 31

Quoted 5 lines
include/configs/davinci_dm6467evm.h new file +4 -0
+
+/* SoC Configuration */
+#define CONFIG_ARM926EJS				/* arm926ejs CPU */
+#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */

Is there a logical register #define you could use instead of the magic number?

I can include the hardware.h and get the value from there, but the way the hardware.h for DaVinci has evolved over the years, including it in the config will result in compilation failure. I'll add this to my TODO list and send in a patch to clean up for all DaVinci SOC's the moment I get some free cycles.

That is fine.

Quoted 7 lines
Quoted 6 lines

include/configs/davinci_dm6467evm.h line 71

Quoted 5 lines
include/configs/davinci_dm6467evm.h new file +5 -0
+
+/* I2C Configuration */
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CONFIG_SYS_I2C_SPEED		80000

This speed is unusual.

Quoted 6 lines

The same speed has been used with a slightly older version of U-boot and has worked fine

Quoted 2 lines

davinci_sonata.h has a comment that it had a silicon bug with 100k Could the same comment be applied here ?

I don't believe so

Ok fine as-is.

Tom