Skip to contentSkip to conversation

Please pull u-boot-samsung/master

U-Boot Minkyu Kang 5 participants 8 messages Oct 12, 2009 – Oct 14, 2009

lore
Share & tools
lore
#0 lore raw

Dear Tom,

The following changes since commit 617da90c1dcf65428ddfb63fef897439950bc915:
Tom Rix (1):
Merge branch 't-next-marvell' into t-next-at91

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

Minkyu Kang (5):
s5pc1xx: support Samsung s5pc1xx SoC
s5pc1xx: support onenand driver
s5pc1xx: support serial driver
s5pc1xx: add support SMDKC100 board
Merge branch 'master' of git://git.denx.de/u-boot-arm

kevin.morfitt at fearnside-systems.co.uk (5):
CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code Clean-up of s3c24x0 header files
Clean-up of s3c24x0 drivers excluding nand driver Clean-up of s3c24x0 nand driver

 MAINTAINERS                            |    4 +
 MAKEALL                                |    1 +
 Makefile                               |    3 +
 board/mpl/vcma9/vcma9.c                |   13 +-
 board/mpl/vcma9/vcma9.h                |   20 +-
 board/samsung/smdk2400/smdk2400.c      |    5 +-
 board/samsung/smdk2410/smdk2410.c      |    5 +-
 board/samsung/smdkc100/Makefile        |   55 ++
 board/samsung/smdkc100/config.mk       |   16 +
 board/samsung/smdkc100/lowlevel_init.S |  215 ++++++
 board/samsung/smdkc100/mem_setup.S     |  197 +++++
 board/samsung/smdkc100/onenand.c       |   83 ++
 board/samsung/smdkc100/smdkc100.c      |   51 ++
 board/sbc2410x/sbc2410x.c              |    7 +-
 board/trab/cmd_trab.c                  |   12 +-
 board/trab/rs485.c                     |   12 +-
 board/trab/trab.c                      |   17 +-
 board/trab/trab_fkt.c                  |   26 +-
 board/trab/tsc2000.c                   |   17 +-
 board/trab/tsc2000.h                   |    4 +-
 board/trab/vfd.c                       |   12 +-
 common/serial.c                        |   18 +
 cpu/arm920t/s3c24x0/interrupts.c       |    4 +-
 cpu/arm920t/s3c24x0/speed.c            |   42 +-
 cpu/arm920t/s3c24x0/timer.c            |  110 ++--
 cpu/arm920t/s3c24x0/usb.c              |   30 +-
 cpu/arm920t/s3c24x0/usb_ohci.c         | 1323 +++++++++++++++++---------------
 cpu/arm920t/s3c24x0/usb_ohci.h         |  209 +++---
 cpu/arm920t/start.S                    |   63 +-
 cpu/arm_cortexa8/s5pc1xx/Makefile      |   53 ++
 cpu/arm_cortexa8/s5pc1xx/cache.c       |   43 +
 cpu/arm_cortexa8/s5pc1xx/clock.c       |  308 ++++++++
 cpu/arm_cortexa8/s5pc1xx/cpu_info.c    |   57 ++
 cpu/arm_cortexa8/s5pc1xx/reset.S       |   47 ++
 cpu/arm_cortexa8/s5pc1xx/timer.c       |  195 +++++
 doc/README.s5pc1xx                     |   56 ++
 drivers/i2c/s3c24x0_i2c.c              |  273 ++++----
 drivers/mtd/nand/s3c2410_nand.c        |   62 +-
 drivers/mtd/onenand/Makefile           |    1 +
 drivers/mtd/onenand/samsung.c          |  636 +++++++++++++++
 drivers/rtc/s3c24x0_rtc.c              |  130 ++--
 drivers/serial/Makefile                |    1 +
 drivers/serial/serial_s3c24x0.c        |  160 +++--
 drivers/serial/serial_s5pc1xx.c        |  195 +++++
 include/asm-arm/arch-s5pc1xx/clk.h     |   32 +
 include/asm-arm/arch-s5pc1xx/clock.h   |   94 +++
 include/asm-arm/arch-s5pc1xx/cpu.h     |   72 ++
 include/asm-arm/arch-s5pc1xx/gpio.h    |  129 ++++
 include/asm-arm/arch-s5pc1xx/power.h   |   42 +
 include/asm-arm/arch-s5pc1xx/pwm.h     |   59 ++
 include/asm-arm/arch-s5pc1xx/uart.h    |   47 ++
 include/configs/sbc2410x.h             |    4 +-
 include/configs/smdk2400.h             |    4 +-
 include/configs/smdk2410.h             |    4 +-
 include/configs/smdkc100.h             |  242 ++++++
 include/configs/trab.h                 |   12 +-
 include/linux/mtd/onenand.h            |    1 +
 include/linux/mtd/onenand_regs.h       |    4 +
 include/linux/mtd/samsung_onenand.h    |  131 ++++
 include/s3c2400.h                      |  494 +-----------
 include/s3c2410.h                      |  159 +---
 include/s3c24x0.h                      |  605 ++-------------
 include/serial.h                       |    7 +
 63 files changed, 4570 insertions(+), 2363 deletions(-)
 create mode 100644 board/samsung/smdkc100/Makefile
 create mode 100644 board/samsung/smdkc100/config.mk
 create mode 100644 board/samsung/smdkc100/lowlevel_init.S
 create mode 100644 board/samsung/smdkc100/mem_setup.S
 create mode 100644 board/samsung/smdkc100/onenand.c
 create mode 100644 board/samsung/smdkc100/smdkc100.c
 create mode 100644 cpu/arm_cortexa8/s5pc1xx/Makefile
 create mode 100644 cpu/arm_cortexa8/s5pc1xx/cache.c
 create mode 100644 cpu/arm_cortexa8/s5pc1xx/clock.c
 create mode 100644 cpu/arm_cortexa8/s5pc1xx/cpu_info.c
 create mode 100644 cpu/arm_cortexa8/s5pc1xx/reset.S
 create mode 100644 cpu/arm_cortexa8/s5pc1xx/timer.c
 create mode 100644 doc/README.s5pc1xx
 create mode 100644 drivers/mtd/onenand/samsung.c
 create mode 100644 drivers/serial/serial_s5pc1xx.c
 create mode 100644 include/asm-arm/arch-s5pc1xx/clk.h
 create mode 100644 include/asm-arm/arch-s5pc1xx/clock.h
 create mode 100644 include/asm-arm/arch-s5pc1xx/cpu.h
 create mode 100644 include/asm-arm/arch-s5pc1xx/gpio.h
 create mode 100644 include/asm-arm/arch-s5pc1xx/power.h
 create mode 100644 include/asm-arm/arch-s5pc1xx/pwm.h
 create mode 100644 include/asm-arm/arch-s5pc1xx/uart.h
 create mode 100644 include/configs/smdkc100.h
 create mode 100644 include/linux/mtd/samsung_onenand.h
#1 lore raw
Quoted 10 lines · Minkyu Kang

Dear Tom,

The following changes since commit 617da90c1dcf65428ddfb63fef897439950bc915:
Tom Rix (1):
Merge branch 't-next-marvell' into t-next-at91

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

I will merge this in soon. Likely this weekend.

Tom

#2 lore raw
In reply to Minkyu Kang
Quoted 8 lines · Minkyu Kang

Dear Tom,

The following changes since commit 617da90c1dcf65428ddfb63fef897439950bc915:
Tom Rix (1):
Merge branch 't-next-marvell' into t-next-at91

are available in the git repository at:

Quoted 9 lines

git://git.denx.de/u-boot-samsung master

Minkyu Kang (5):
s5pc1xx: support Samsung s5pc1xx SoC
s5pc1xx: support onenand driver
s5pc1xx: support serial driver
s5pc1xx: add support SMDKC100 board
Merge branch 'master' of git://git.denx.de/u-boot-arm

This is a new board.
I think this board was submitted after the merge window And it has a lot of compiler warnings.
Can you clean these up ?
I think these should wait to be merged.

Quoted 6 lines

kevin.morfitt at fearnside-systems.co.uk (5):
CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code Clean-up of s3c24x0 header files
Clean-up of s3c24x0 drivers excluding nand driver Clean-up of s3c24x0 nand driver

These look like a code that was run through indent. cleaning up without any obvious new features. These would be ok to merge.

Does this sound ok?
I can just cherry pick the cleanups.

Tom

#3 lore raw

Tom Rix a ?crit :

Quoted 36 lines
Quoted 8 lines · Minkyu Kang

Dear Tom,

The following changes since commit 617da90c1dcf65428ddfb63fef897439950bc915:
Tom Rix (1):
Merge branch 't-next-marvell' into t-next-at91

are available in the git repository at:

Quoted 10 lines

git://git.denx.de/u-boot-samsung master

Minkyu Kang (5):
s5pc1xx: support Samsung s5pc1xx SoC
s5pc1xx: support onenand driver
s5pc1xx: support serial driver
s5pc1xx: add support SMDKC100 board
Merge branch 'master' of git://git.denx.de/u-boot-arm

This is a new board.
I think this board was submitted after the merge window And it has a lot of compiler warnings.
Can you clean these up ?
I think these should wait to be merged.

Quoted 7 lines

kevin.morfitt at fearnside-systems.co.uk (5):
CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code Clean-up of s3c24x0 header files
Clean-up of s3c24x0 drivers excluding nand driver Clean-up of s3c24x0 nand driver

Quoted 9 lines

These look like a code that was run through indent. cleaning up without any obvious new features. These would be ok to merge.

Does this sound ok?
I can just cherry pick the cleanups.

Tom

Tom,
I think you should also CC Kevin, done now!

cheers,

#4 lore raw
In reply to Tom Rix

Hi Tom,

Quoted 9 lines · On Wednesday 14 October 2009 05:31:04 Tom Rix wrote:
Quoted 8 lines

git://git.denx.de/u-boot-samsung master

Minkyu Kang (5):
s5pc1xx: support Samsung s5pc1xx SoC
s5pc1xx: support onenand driver
s5pc1xx: support serial driver
s5pc1xx: add support SMDKC100 board
Merge branch 'master' of git://git.denx.de/u-boot-arm

Quoted 5 lines

This is a new board.
I think this board was submitted after the merge window And it has a lot of compiler warnings.
Can you clean these up ?
I think these should wait to be merged.

The general rule in U-Boot is, that patches should be merged even after the merge window is closed, when the initial version was posted before the merge window closed. And those patches were posted on 2009-09-04 in the initial version. So I vote for merging them now.

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de

#5 lore raw
Quoted 17 lines · Stefan Roese

Hi Tom,

Quoted 8 lines · On Wednesday 14 October 2009 05:31:04 Tom Rix wrote:
Quoted 8 lines

git://git.denx.de/u-boot-samsung master

Minkyu Kang (5):
s5pc1xx: support Samsung s5pc1xx SoC
s5pc1xx: support onenand driver
s5pc1xx: support serial driver
s5pc1xx: add support SMDKC100 board
Merge branch 'master' of git://git.denx.de/u-boot-arm

Quoted 5 lines

This is a new board.
I think this board was submitted after the merge window And it has a lot of compiler warnings.
Can you clean these up ?
I think these should wait to be merged.

Quoted 4 lines

The general rule in U-Boot is, that patches should be merged even after the merge window is closed, when the initial version was posted before the merge window closed. And those patches were posted on 2009-09-04 in the initial version. So I vote for merging them now.

Ok. The version I saw was on Oct 1.
I will go ahead and merge them in.
Tom

Quoted 10 lines

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de

#6 lore raw
In reply to Stefan Roese
Quoted 17 lines · Stefan Roese

Hi Tom,

Quoted 8 lines · On Wednesday 14 October 2009 05:31:04 Tom Rix wrote:
Quoted 8 lines

git://git.denx.de/u-boot-samsung master

Minkyu Kang (5):
s5pc1xx: support Samsung s5pc1xx SoC
s5pc1xx: support onenand driver
s5pc1xx: support serial driver
s5pc1xx: add support SMDKC100 board
Merge branch 'master' of git://git.denx.de/u-boot-arm

Quoted 5 lines

This is a new board.
I think this board was submitted after the merge window And it has a lot of compiler warnings.
Can you clean these up ?
I think these should wait to be merged.

Quoted 5 lines

The general rule in U-Boot is, that patches should be merged even after the merge window is closed, when the initial version was posted before the merge window closed. And those patches were posted on 2009-09-04 in the initial version. So I vote for merging them now.

I have pushed the entire pull request to arm/master-sync. The branch I am using to stage the pull request to the mainline.

There are a number of compiler warnings for the sp5c1xx board that should be fixed.

Tom

Quoted 9 lines

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de

#7 lore raw

Dear Tom

2009/10/14 Tom Rix <[email protected]>:

Quoted 43 lines
Quoted 17 lines · Stefan Roese

Hi Tom,

Quoted 8 lines · On Wednesday 14 October 2009 05:31:04 Tom Rix wrote:
Quoted 8 lines

? git://git.denx.de/u-boot-samsung master

Minkyu Kang (5):
? ? ? s5pc1xx: support Samsung s5pc1xx SoC
? ? ? s5pc1xx: support onenand driver
? ? ? s5pc1xx: support serial driver
? ? ? s5pc1xx: add support SMDKC100 board
? ? ? Merge branch 'master' of git://git.denx.de/u-boot-arm

Quoted 5 lines

This is a new board.
I think this board was submitted after the merge window And it has a lot of compiler warnings.
Can you clean these up ?
I think these should wait to be merged.

Quoted 5 lines

The general rule in U-Boot is, that patches should be merged even after the merge window is closed, when the initial version was posted before the merge window closed. And those patches were posted on 2009-09-04 in the initial version. So I vote for merging them now.

I have pushed the entire pull request to arm/master-sync. ?The branch I am using to stage the pull request to the mainline.

There are a number of compiler warnings for the sp5c1xx board that should be fixed.

Tom

Quoted 9 lines

Cheers,
Stefan

--
DENX Software Engineering GmbH, ? ? ?MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, ?Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de

Quoted 5 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

I'll fix compiler warnings asap
Thanks

Minkyu Kang

Signature · 2 lines
from. prom.
www.promsoft.net