Skip to contentSkip to conversation

sata_nv: make sure link is brough up online when skipping hardreset

PATCH In review Tejun Heo 2 participants 2 messages Oct 14, 2009 – Oct 16, 2009 libata

lore
Share & tools
lore

Tejun Heo

author
#0 lore raw

PATCH 1/1 sata_nv: make sure link is brough up online when skipping hardreset

prereset doesn't bring link online if hardreset is about to happen and nv_hardreset() may skip if conditions are not right so softreset may be entered with non-working link status if the system firmware didn't bring it up before entering OS code which can happen during resume. This patch makes nv_hardreset() to bring up the link if it's skipping reset.

This bug was reported by [email protected] in the following bug entry.

http://bugzilla.kernel.org/show_bug.cgi?id=14329

---
 drivers/ata/sata_nv.c |   18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
drivers/ata/sata_nv.c +15 -3
index 86a4058..1eb4e02 100644
@@ -1594,9 +1594,21 @@ static int nv_hardreset(struct ata_link *link, unsigned int *class,
 	    !ata_dev_enabled(link->device))
 		sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
 				    NULL, NULL);
-	else if (!(ehc->i.flags & ATA_EHI_QUIET))
-		ata_link_printk(link, KERN_INFO,
-				"nv: skipping hardreset on occupied port\n");
+	else {
+		const unsigned long *timing = sata_ehc_deb_timing(ehc);
+		int rc;
+
+		if (!(ehc->i.flags & ATA_EHI_QUIET))
+			ata_link_printk(link, KERN_INFO, "nv: skipping "
+					"hardreset on occupied port\n");
+
+		/* make sure the link is online */
+		rc = sata_link_resume(link, timing, deadline);
+		/* whine about phy resume failure but proceed */
+		if (rc && rc != -EOPNOTSUPP)
+			ata_link_printk(link, KERN_WARNING, "failed to resume "
+					"link (errno=%d)\n", rc);
+	}
 
 	/* device signature acquisition is unreliable */
 	return -EAGAIN;
#1 lore raw
Quoted 9 lines · Tejun Heo

prereset doesn't bring link online if hardreset is about to happen and nv_hardreset() may skip if conditions are not right so softreset may be entered with non-working link status if the system firmware didn't bring it up before entering OS code which can happen during resume. This patch makes nv_hardreset() to bring up the link if it's skipping reset.

This bug was reported by [email protected] in the following bug entry.

Quoted 8 lines
   http://bugzilla.kernel.org/show_bug.cgi?id=14329
---
  drivers/ata/sata_nv.c |   18 +++++++++++++++---
  1 file changed, 15 insertions(+), 3 deletions(-)

applied -- man, what a pain this chip is