Skip to contentSkip to conversation

Root-Filesystem ober NFS doesn't work... --> Kernel panic ---> corrupt textfile

U-Boot Michael Schmid 1 participant 1 message Oct 19, 2009

lore
Share & tools
lore
#0 lore raw

I'm sorry, somehow the log.txt in my last e-mail got corrupted....

Here it is:

Uncompressing Linux............................................................................................... done, booting the kernel.
Linux version 2.6.14-M5 (Alan at ace-yang) (gcc version 3.3.2) #837 Tue

Aug 14 14:14:03 CST 2007
 CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)
 Machine: Artila M501 SOM
 Memory policy: ECC disabled, Data cache writeback
 Clocks: CPU 179 MHz, master 59 MHz, main 18.432 MHz
 CPU0: D VIVT write-back cache
 CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
 CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
 Built 1 zonelists
 Kernel command line: root=/dev/nfs rw nfsroot=192.168.2.40:/opt/arm 

ip=192.168.2.196:192.168.2.40:192.168.2.254:255.255.255.0:michael-laptop::off console=ttyS0,115200
AT91: 128 gpio irqs in 4 banks
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 26824KB available (2389K code, 523K data, 104K init) Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like
an initrd
Freeing initrd memory: 2509K
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (extended precision) JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. Initializing Cryptographic API
Matrix500 RTC driver.
Matrix500 GPIO Driver Loaded.
AT91 SPI driver loaded
AT91 Watchdog Timer enabled (5 seconds)
ttyS0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL
ttyS1 at MMIO 0xfefc0000 (irq = 6) is a AT91_SERIAL
ttyS2 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL
ttyS3 at MMIO 0xfefc8000 (irq = 8) is a AT91_SERIAL
ttyS4 at MMIO 0xfefcc000 (irq = 9) is a AT91_SERIAL
io scheduler noop registered
io scheduler anticipatory registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PPP generic driver version 2.4.2
PPP BSD Compression module registered
NET: Registered protocol family 24
eth0: Link now 100-FullDuplex
eth0: AT91 ethernet at 0xfefbc000 int=24 100-FullDuplex (00:13:48:00:77:b5)
eth0: Davicom 9161AE PHY (Copper)
physmap flash device: 1000000 at 10000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
RedBoot partition parsing not available
block2mtd: version $Revision: 1.28 $
at91rm9200-ohci at91rm9200-ohci: AT91RM9200 OHCI
at91rm9200-ohci at91rm9200-ohci: new USB bus registered, assigned bus
number 1
at91rm9200-ohci at91rm9200-ohci: irq 23, io mem 0x00300000
usb usb1: Product: AT91RM9200 OHCI
usb usb1: Manufacturer: Linux 2.6.14-M5 ohci_hcd
usb usb1: SerialNumber: at91rm9200
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver cdc_acm drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver
for USB modems and ISDN adapters
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
rtusb init ====>
usbcore: registered new driver rt73
usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI
USB Serial Device
usbcore: registered new driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
usbcore: registered new driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor
driver v0.12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
Found AT91 i2c
RTC found.
AT91RM9200 MCI initialized
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes) TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
ip_conntrack version 2.3 (256 buckets, 2048 max) - 240 bytes per conntrack ctnetlink v0.90: registering with nfnetlink.
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[email protected]>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
Netfilter messages via NETLINK v0.30.
NET: Registered protocol family 1
NET: Registered protocol family 17
eth0: Link now 100-FullDuplex
IP-Config: Complete:

       device=eth0, addr=192.168.2.196, mask=255.255.255.0, 

gw=192.168.2.254,
host=michael-laptop, domain=, nis-domain=(none), bootserver=192.168.2.40, rootserver=192.168.2.40, rootpath=
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
VFS: Cannot open root device "nfs" or unknown-block(0,255) Please append a correct "root=" boot option

 Kernel panic - not syncing: VFS: Unable to mount root fs on 

unknown-block(0,255)