Skip to contentSkip to conversation

Extend modem.conf

DISCUSSION Ryan Raasch 2 participants 2 messages Oct 21, 2009

lore
Share & tools
lore
#0 lore raw

Hello,

I was wanting to extend the syntax of the modem.conf file. It is extra work to maintain a different plugin file for each generic AT modem with a different speed, serial settings.

I'm not sure on the best syntax for this. Maybe below could be a solution.

[generic]
Driver=atgen
Device=/dev/ttyS0:baud=115200:read=on:local:on

OR

[generic]
Driver=atgen
Device=/dev/ttyS0
DeviceOpts=baud=115200:read=on:local:on

Any opinions?

Also, shouldn't the "Driver" keyword in the file be named "Plugin" instead? It may give a better indication where to read in the source.

Greetings,
Ryan

#1 lore raw

Hi Ryan,

Quoted 6 lines

Hello,

I was wanting to extend the syntax of the modem.conf file. It is extra work to maintain a different plugin file for each generic AT modem with a different speed, serial settings.

I agree that this would be useful.

Quoted 6 lines

I'm not sure on the best syntax for this. Maybe below could be a solution.

[generic]
Driver=atgen
Device=/dev/ttyS0
DeviceOpts=baud=115200:read=on:local:on

I prefer something like:
[generic]
Driver=atgen
Device=/dev/ttyS0
Baud=115200
Read=on
Local=on

We can even capitalize the values in gattty if it makes things easier.

Quoted 2 lines

Also, shouldn't the "Driver" keyword in the file be named "Plugin" instead? It may give a better indication where to read in the source.

Everything is a driver, in this case we mean the modem driver. These are also generally always plugins of the same name which leads to confusion.

Regards,
-Denis