OMAP3 beagle Add usbtty configuration
A message that is not in the archive (sent off-list or not yet received): [email protected]
Gupta
PATCH 6/8 OMAP3 beagle Add usbtty configuration
Tom,
Quoted 34 lines
From: Tom Rix <Tom.Rix <at> windriver.com>
Subject: [PATCH 6/8] OMAP3 beagle Add usbtty configuration
Newsgroups: gmane.comp.boot-loaders.u-boot
Date: 2009-09-28 16:37:27 GMT (4 weeks, 12 hours and 41 minutes ago)The primary console of beagle is the serial header.
A secondary console is to use the usbtty. The user can set this manually by doing
setenv stdout usbtty; setenv stdin usbtty; setenv stderr usbtty saveenv
usbtty will be usable by accessing the
/dev/ttyACM0on a linux host.Signed-off-by Tom Rix <Tom.Rix <at> windriver.com>--- include/configs/omap3_beagle.h | 16 ++++++++++++++++ 1 files changed, 16 insertions(+), 0 deletions(-)include/configs/omap3_beagle.h +5
-0@@ -98,6 +98,21 @@#define CONFIG_OMAP3_MMC 1#define CONFIG_DOS_PARTITION 1 +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 +#define CONFIG_TWL4030_USB 1 +
include/configs/omap3_beagle.h line 115
Quoted 10 lines
include/configs/omap3_beagle.h +10
-0+/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "Beagle" +
We can either define CONFIG_MUSB_UDC or CONFIG_MUSB_HCD (host support), so I think it's better to move host and device specific definitions within CONFIG_MUSB_UDC or CONFIG_MUSB_HCD.
#ifdef CONFIG_USB_OMAP3
#ifdef CONFIG_MUSB_HCD
<here define all host specific definitions>
#endif
#ifdef CONFIG_MUSB_UDC
<here define all device specific definitions>
#endif
#endif /* CONFIG_USB_OMAP3 */
This change would make it easier to test Host or device functionalities.
-Ajay
Quoted 13 lines
include/configs/omap3_beagle.h +1
-1/* commands to include */ #include <config_cmd_default.h> @@ -164,6 +179,7 @@#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ + "usbtty=cdc_acm\0" \ "console=ttyS2,115200n8\0" \ "videomode=1024x768 <at> 60,vxres=1024,vyres=768\0" \ "videospec=omapfb:vram:2M,vram:4M\0" \ --1.6.0.6
PATCH 6/8 OMAP3 beagle Add usbtty configuration
Quoted 59 lines · Ajay Kumar
Tom,
Quoted 34 lines
From: Tom Rix <Tom.Rix <at> windriver.com>
Subject: [PATCH 6/8] OMAP3 beagle Add usbtty configuration
Newsgroups: gmane.comp.boot-loaders.u-boot
Date: 2009-09-28 16:37:27 GMT (4 weeks, 12 hours and 41 minutes ago)The primary console of beagle is the serial header.
A secondary console is to use the usbtty. The user can set this manually by doing
setenv stdout usbtty; setenv stdin usbtty; setenv stderr usbtty saveenv
usbtty will be usable by accessing the
/dev/ttyACM0on a linux host.Signed-off-by Tom Rix <Tom.Rix <at> windriver.com>--- include/configs/omap3_beagle.h | 16 ++++++++++++++++ 1 files changed, 16 insertions(+), 0 deletions(-)include/configs/omap3_beagle.h +5
-0@@ -98,6 +98,21 @@#define CONFIG_OMAP3_MMC 1#define CONFIG_DOS_PARTITION 1 +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 +#define CONFIG_TWL4030_USB 1 +include/configs/omap3_beagle.h line 115
Quoted 10 lines
include/configs/omap3_beagle.h +10
-0+/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "Beagle" +We can either define
CONFIG_MUSB_UDCorCONFIG_MUSB_HCD(host support), so I think it's better to move host and device specific definitions withinCONFIG_MUSB_UDCorCONFIG_MUSB_HCD.#ifdef
CONFIG_USB_OMAP3#ifdef
CONFIG_MUSB_HCD
<here define all host specific definitions>
#endif#ifdef
CONFIG_MUSB_UDC
<here define all device specific definitions>
#endif
Quoted 5 lines
#endif /*
CONFIG_USB_OMAP3*/This change would make it easier to test Host or device functionalities.
-Ajay
I am not adding host support.
Tom
Gupta
PATCH 6/8 OMAP3 beagle Add usbtty configuration
Tom,
Quoted 15 lines
Quoted 2 lines
We can either define
CONFIG_MUSB_UDCorCONFIG_MUSB_HCD(host support),so I think it's better to move host and device specific definitions within
Quoted 12 lines
CONFIG_MUSB_UDCorCONFIG_MUSB_HCD.#ifdef
CONFIG_USB_OMAP3#ifdef
CONFIG_MUSB_HCD
<here define all host specific definitions>
#endif#ifdef
CONFIG_MUSB_UDC
<here define all device specific definitions>
#endif
Quoted 7 lines
Quoted 5 lines
#endif /*
CONFIG_USB_OMAP3*/This change would make it easier to test Host or device functionalities.
-Ajay
I am not adding host support.
Host side controller driver is already available (musb_hcd.c) and can be used by any omap3 platforms.
So I think we can add host config also for all the omap3 platforms which anyways doesn't break device functionality.
I would be submitting USB config patch for omap3_evm by today.
-Ajay
Quoted 1 line
Tom