Skip to contentSkip to conversation

bnx2: avoid compiler warnings

PATCH Applied Eric Dumazet 3 participants 3 messages Nov 3, 2009 – Nov 4, 2009

Subsystems (2)
Networking Network drivers
lore
Share & tools
lore

Eric Dumazet

author
#0 lore raw

PATCH 1/1 bnx2: avoid compiler warnings

drivers/net/bnx2.c: In function ‘bnx2_enable_forced_2g5’:
drivers/net/bnx2.c:1447: warning: ‘bmcr’ may be used uninitialized in this function drivers/net/bnx2.c: In function ‘bnx2_disable_forced_2g5’:
drivers/net/bnx2.c:1482: warning: ‘bmcr’ may be used uninitialized in this function

One fix would be to have an initial value, but a plain return might be better.

Signed-off-by Eric Dumazet <[email protected]>

---

drivers/net/bnx2.c +4 -0
index 08cddb6..539d23b 100644
@@ -1466,6 +1466,8 @@ bnx2_enable_forced_2g5(struct bnx2 *bp)
 	} else if (CHIP_NUM(bp) == CHIP_NUM_5708) {
 		bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
 		bmcr |= BCM5708S_BMCR_FORCE_2500;
+	} else {
+		return;
 	}
 
 	if (bp->autoneg & AUTONEG_SPEED) {

@@ -1500,6 +1502,8 @@ bnx2_disable_forced_2g5(struct bnx2 *bp)
 	} else if (CHIP_NUM(bp) == CHIP_NUM_5708) {
 		bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
 		bmcr &= ~BCM5708S_BMCR_FORCE_2500;
+	} else {
+		return;
 	}
 
 	if (bp->autoneg & AUTONEG_SPEED)
Acked-by on v1 1/1
#1 lore raw
Quoted 6 lines · Eric Dumazet

drivers/net/bnx2.c: In function ‘bnx2_enable_forced_2g5’:
drivers/net/bnx2.c:1447: warning: ‘bmcr’ may be used uninitialized in this function drivers/net/bnx2.c: In function ‘bnx2_disable_forced_2g5’:
drivers/net/bnx2.c:1482: warning: ‘bmcr’ may be used uninitialized in this function

One fix would be to have an initial value, but a plain return might be better.

I agree that plain return is better. Thanks.

Acked-by Michael Chan <[email protected]>
Quoted 27 lines
Signed-off-by Eric Dumazet <[email protected]>

---

drivers/net/bnx2.c +4 -0
index 08cddb6..539d23b 100644
@@ -1466,6 +1466,8 @@ bnx2_enable_forced_2g5(struct bnx2 *bp)
 	} else if (CHIP_NUM(bp) == CHIP_NUM_5708) {
 		bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
 		bmcr |= BCM5708S_BMCR_FORCE_2500;
+	} else {
+		return;
 	}
 
 	if (bp->autoneg & AUTONEG_SPEED) {

@@ -1500,6 +1502,8 @@ bnx2_disable_forced_2g5(struct bnx2 *bp)
 	} else if (CHIP_NUM(bp) == CHIP_NUM_5708) {
 		bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
 		bmcr &= ~BCM5708S_BMCR_FORCE_2500;
+	} else {
+		return;
 	}
 
 	if (bp->autoneg & AUTONEG_SPEED)
maintainer Applied
#2 lore raw

From: "Michael Chan" <[email protected]>
Date: Tue, 3 Nov 2009 10:01:34 -0800

Quoted 7 lines · Eric Dumazet
Quoted 5 lines

drivers/net/bnx2.c: In function ‘bnx2_enable_forced_2g5’:
drivers/net/bnx2.c:1447: warning: ‘bmcr’ may be used uninitialized in this function drivers/net/bnx2.c: In function ‘bnx2_disable_forced_2g5’:
drivers/net/bnx2.c:1482: warning: ‘bmcr’ may be used uninitialized in this function

Quoted 5 lines
Quoted 1 line

One fix would be to have an initial value, but a plain return might be better.

I agree that plain return is better. Thanks.

Acked-by Michael Chan <[email protected]>

Applied, thanks.