Skip to contentSkip to conversation

IMote2 specific udev config

PATCH New Jonathan Cameron 1 participant 1 message Nov 4, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 IMote2 specific udev config

---
local.rules adds some rules relevant to IIO subsystem for this board (ensures consistent naming of certain character devices)

the init is required to up the number of inodes and avoid udev falling over due to running out.

 recipes/udev/udev-141/imote2/init        |   81 ++++++++++++++++++++++++++++++
 recipes/udev/udev-141/imote2/local.rules |   45 ++++++++++++++++
 2 files changed, 126 insertions(+), 0 deletions(-)
recipes/udev/udev-141/imote2/init new file +81 -0
new file mode 100644
index 0000000..0599ee0
@@ -0,0 +1,81 @@
+#!/bin/sh -e
+
+### BEGIN INIT INFO
+# Provides:          udev
+# Required-Start:    mountvirtfs
+# Required-Stop:     
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Start udevd, populate /dev and load drivers.
+### END INIT INFO
+
+export TZ=/etc/localtime
+
+[ -d /sys/class ] || exit 1
+[ -r /proc/mounts ] || exit 1
+[ -x /sbin/udevd ] || exit 1
+[ -f /etc/default/udev ] && . /etc/default/udev
+[ -f /etc/udev/udev.conf ] && . /etc/udev/udev.conf
+
+kill_udevd() {
+        if [ -x /sbin/pidof ]; then
+                pid=`/sbin/pidof -x udevd`
+                [ -n "$pid" ] && kill $pid
+        fi
+}
+
+export ACTION=add
+# propagate /dev from /sys
+echo "Starting udev"
+
+# mount the tmpfs on /dev, if not already done
+LANG=C awk "\$2 == \"/dev\" && \$4 == \"tmpfs\" { exit 1 }" /proc/mounts && {
+        mount -n -o mode=0755,nr_inodes=7454 -t tmpfs none "/dev"
+        mkdir -m 0755 /dev/pts
+        mkdir -m 1777 /dev/shm
+}
+
+if [ "$DEVCACHE" != "" ]; then
+	# Invalidate udev cache if the kernel or its bootargs/cmdline have changed
+	[ -x /bin/uname ] && /bin/uname -mrspv > /tmp/uname || touch /tmp/uname
+	[ -r /proc/cmdline ] && cat /proc/cmdline > /tmp/cmdline || touch /tmp/cmdline
+	[ -r /proc/atags ] && cat /proc/atags > /tmp/atags || touch /tmp/atags
+	if [ -e $DEVCACHE ] && \
+	   cmp -s /tmp/uname /etc/udev/saved.uname && \
+	   cmp -s /tmp/cmdline /etc/udev/saved.cmdline && \
+	   cmp -s /tmp/atags /etc/udev/saved.atags; then
+		(cd /; tar xf $DEVCACHE)
+		not_first_boot=1
+	fi
+fi
+
+# make_extra_nodes
+kill_udevd > "/dev/null" 2>&1
+
+        # trigger the sorted events
+        echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
+        /sbin/udevd -d
+
+        /sbin/udevadm control --env STARTUP=1
+		if [ "$not_first_boot" != "" ];then
+			/sbin/udevadm trigger --subsystem-nomatch=tty --subsystem-nomatch=mem --subsystem-nomatch=vc --subsystem-nomatch=vtconsole --subsystem-nomatch=misc --subsystem-nomatch=dcon --subsystem-nomatch=pci_bus  --subsystem-nomatch=graphics  --subsystem-nomatch=backlight --subsystem-nomatch=video4linux  --subsystem-nomatch=platform
+			(/sbin/udevadm settle --timeout=3; /sbin/udevadm control --env STARTUP=)&
+			if [ "$DEVCACHE" != "" ]; then
+				rm -f /tmp/uname
+				rm -f /tmp/cmdline
+				rm -f /tmp/atags
+			fi
+		else
+			/sbin/udevadm trigger
+			/sbin/udevadm settle
+			if [ "$DEVCACHE" != "" ]; then
+				echo -n "Populating dev cache"
+				(cd /; tar cf $DEVCACHE dev)
+				mv /tmp/uname /etc/udev/saved.uname
+				mv /tmp/cmdline /etc/udev/saved.cmdline
+				mv /tmp/atags /etc/udev/saved.atags
+				echo
+			fi
+		fi
+
+exit 0
recipes/udev/udev-141/imote2/local.rules new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
1.6.0.4