pxa/cm-x300: add PWM backlight support
Subsystems (3)
PATCH 1/1 pxa/cm-x300: add PWM backlight support
Signed-off-by Igor Grinberg <[email protected]>
Signed-off-by Mike Rapoport <[email protected]>
--- arch/arm/mach-pxa/Kconfig | 1 + arch/arm/mach-pxa/cm-x300.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+), 0 deletions(-)
arch/arm/mach-pxa/Kconfig +1 -0
@@ -244,6 +244,7 @@ config MACH_COLIBRI300 select PXA3xx select CPU_PXA300 select CPU_PXA310 + select HAVE_PWM config MACH_COLIBRI320 bool "Toradex Colibri PXA320"
arch/arm/mach-pxa/cm-x300.c +30 -0
@@ -24,6 +24,7 @@#include <linux/dm9000.h> #include <linux/leds.h> #include <linux/rtc-v3020.h> +#include <linux/pwm_backlight.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h>
@@ -50,6 +51,7 @@#include <asm/mach/map.h> #include "generic.h" +#include "devices.h" #define CM_X300_ETH_PHYS 0x08000010
@@ -160,6 +162,9 @@ static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {/* Standard I2C */ GPIO21_I2C_SCL ,GPIO22_I2C_SDA , + +/* PWM Backlight */ + GPIO19_PWM2_OUT, }; static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
@@ -290,6 +295,30 @@ static void __init cm_x300_init_lcd(void)static inline void cm_x300_init_lcd (void ) {}#endif +#if defined(CONFIG_BACKLIGHT_PWM ) || defined(CONFIG_BACKLIGHT_PWM_MODULE ) +static struct platform_pwm_backlight_data cm_x300_backlight_data = { + .pwm_id =2 , + .max_brightness =100 , + .dft_brightness =100 , + .pwm_period_ns =10000 , +}; + +static struct platform_device cm_x300_backlight_device = { + .name ="pwm-backlight" , + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &cm_x300_backlight_data, + }, +}; + +static void cm_x300_init_bl (void ) +{ +platform_device_register (&cm_x300_backlight_device); +} +#else +static inline void cm_x300_init_bl (void ) {} +#endif +#if defined(CONFIG_SPI_GPIO ) || defined(CONFIG_SPI_GPIO_MODULE )#define GPIO_LCD_BASE (144)#define GPIO_LCD_DIN (GPIO_LCD_BASE + 8)/* aux_gpio3_0 */
@@ -649,6 +678,7 @@ static void __init cm_x300_init(void)cm_x300_init_rtc ();cm_x300_init_ac97 ();cm_x300_init_wi2wi (); +cm_x300_init_bl (); } static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
Signature · 1 line
1.6.0.6
PATCH 1/1 pxa/cm-x300: add PWM backlight support
Hi Eric,
Any updates on this?
Quoted 89 lines · Igor Grinberg
Signed-off-by Igor Grinberg <[email protected]>Signed-off-by Mike Rapoport <[email protected]>--- arch/arm/mach-pxa/Kconfig | 1 + arch/arm/mach-pxa/cm-x300.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+), 0 deletions(-)arch/arm/mach-pxa/Kconfig +1
-0@@ -244,6 +244,7 @@ config MACH_COLIBRI300 select PXA3xx select CPU_PXA300 select CPU_PXA310 + select HAVE_PWM config MACH_COLIBRI320 bool "Toradex Colibri PXA320"arch/arm/mach-pxa/cm-x300.c +30
-0@@ -24,6 +24,7 @@#include <linux/dm9000.h> #include <linux/leds.h> #include <linux/rtc-v3020.h> +#include <linux/pwm_backlight.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> @@ -50,6 +51,7 @@#include <asm/mach/map.h> #include "generic.h" +#include "devices.h" #define CM_X300_ETH_PHYS 0x08000010@@ -160,6 +162,9 @@ static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {/* Standard I2C */ GPIO21_I2C_SCL ,GPIO22_I2C_SDA , + +/* PWM Backlight */ + GPIO19_PWM2_OUT, }; static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {@@ -290,6 +295,30 @@ static void __init cm_x300_init_lcd(void)static inline void cm_x300_init_lcd (void ) {}#endif +#if defined(CONFIG_BACKLIGHT_PWM ) || defined(CONFIG_BACKLIGHT_PWM_MODULE ) +static struct platform_pwm_backlight_data cm_x300_backlight_data = { + .pwm_id =2 , + .max_brightness =100 , + .dft_brightness =100 , + .pwm_period_ns =10000 , +}; + +static struct platform_device cm_x300_backlight_device = { + .name ="pwm-backlight" , + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &cm_x300_backlight_data, + }, +}; + +static void cm_x300_init_bl (void ) +{ +platform_device_register (&cm_x300_backlight_device); +} +#else +static inline void cm_x300_init_bl (void ) {} +#endif +#if defined(CONFIG_SPI_GPIO ) || defined(CONFIG_SPI_GPIO_MODULE )#define GPIO_LCD_BASE (144)#define GPIO_LCD_DIN (GPIO_LCD_BASE + 8)/* aux_gpio3_0 */ @@ -649,6 +678,7 @@ static void __init cm_x300_init(void)cm_x300_init_rtc ();cm_x300_init_ac97 ();cm_x300_init_wi2wi (); +cm_x300_init_bl (); } static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
PATCH 1/1 pxa/cm-x300: add PWM backlight support
Quoted 4 lines · Igor Grinberg
Hi Eric,
Any updates on this?
Patch is good, applied to 'topic/cm-x300' and will be merged back into 'devel' later soon. Thanks.