mac80211: add the total ampdu length to tx info

@@ -390,10 +390,12 @@ struct ieee80211_tx_rate {
  * @control: union for control data
  * @status: union for status data
  * @driver_data: array of driver_data pointers
- * @ampdu_ack_len: number of aggregated frames.
+ * @ampdu_ack_len: number of acked aggregated frames.
  * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
  * @ampdu_ack_map: block ack bit map for the aggregation.
  * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
+ * @ampdu_len: number of aggregated frames.
+ * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
  * @ack_signal: signal strength of the ACK frame
  */
 struct ieee80211_tx_info {

@@ -428,7 +430,8 @@ struct ieee80211_tx_info {
 			u8 ampdu_ack_len;
 			u64 ampdu_ack_map;
 			int ack_signal;
-			/* 8 bytes free */
+			u8 ampdu_len;
+			/* 7 bytes free */
 		} status;
 		struct {
 			struct ieee80211_tx_rate driver_rates[

@@ -81,6 +81,7 @@ struct ath_buf {
 	u16 bf_flags;
 	struct ath_buf_state bf_state;
 	dma_addr_t bf_dmacontext;
+	struct ath_wiphy *aphy;
 };
 
 struct ath_atx_tid {

@@ -167,24 +167,18 @@ struct ath_rate_priv {
 	struct ath_rate_softc *asc;
 };
 
+#define ATH_TX_INFO_FRAME_TYPE_INTERNAL	(1 << 0)
+#define ATH_TX_INFO_FRAME_TYPE_PAUSE	(1 << 1)
+#define ATH_TX_INFO_UPDATE_RC		(1 << 2)
+#define ATH_TX_INFO_XRETRY		(1 << 3)
+#define ATH_TX_INFO_UNDERRUN		(1 << 4)
+
 enum ath9k_internal_frame_type {
 	ATH9K_NOT_INTERNAL,
 	ATH9K_INT_PAUSE,
 	ATH9K_INT_UNPAUSE
 };
 
-struct ath_tx_info_priv {
-	struct ath_wiphy *aphy;
-	struct ath_tx_status tx;
-	int n_frames;
-	int n_bad_frames;
-	bool update_rc;
-	enum ath9k_internal_frame_type frame_type;
-};
-
-#define ATH_TX_INFO_PRIV(tx_info) \
-	((struct ath_tx_info_priv *)((tx_info)->rate_driver_data[0]))
-
 void ath_rate_attach(struct ath_softc *sc);
 u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate);
 int ath_rate_control_register(void);

@@ -338,13 +338,11 @@ void ath9k_wiphy_chan_work(struct work_s
 void ath9k_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct ath_wiphy *aphy = hw->priv;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
 
-	if (tx_info_priv && tx_info_priv->frame_type == ATH9K_INT_PAUSE &&
+	if ((tx_info->pad[0] & ATH_TX_INFO_FRAME_TYPE_PAUSE) &&
 	    aphy->state == ATH_WIPHY_PAUSING) {
-		if (!(info->flags & IEEE80211_TX_STAT_ACK)) {
+		if (!(tx_info->flags & IEEE80211_TX_STAT_ACK)) {
 			printk(KERN_DEBUG "ath9k: %s: no ACK for pause "
 			       "frame\n", wiphy_name(hw->wiphy));
 			/*

@@ -363,9 +361,6 @@ void ath9k_tx_status(struct ieee80211_hw
 		}
 	}
 
-	kfree(tx_info_priv);
-	tx_info->rate_driver_data[0] = NULL;
-
 	dev_kfree_skb(skb);
 }
 

165 lines not on this page · raw message

@@ -257,14 +257,17 @@ static const struct file_operations fops
 
 void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb)
 {
-	struct ath_tx_info_priv *tx_info_priv = NULL;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_tx_rate *rates = tx_info->status.rates;
-	int final_ts_idx, idx;
+	int final_ts_idx = 0, idx, i;
 	struct ath_rc_stats *stats;
 
-	tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
-	final_ts_idx = tx_info_priv->tx.ts_rateindex;
+	for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+		if (!rates[i].count)
+			break;
+
+		final_ts_idx = i;
+	}
 	idx = rates[final_ts_idx].idx;
 	stats = &sc->debug.stats.rcstats[idx];
 	stats->success++;

171 lines not on this page · raw message