Skip to contentSkip to conversation

any potential problems with beagle using OMAP34XX macros?

U-Boot Robert P. J. Day 2 participants 2 messages Nov 17, 2009

lore
Share & tools
lore
#0 lore raw

i asked about this on the beagleboard list but i figure i can ask
here as well. while the beagleboard is based on the OMAP3530, if you check out board/ti/beagle:

$ grep OMAP3 *
beagle.c:	gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE;
beagle.c:	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
beagle.c:	struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
beagle.c:	struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
beagle.h:	"OMAP3 Beagle board",
config.mk:# Beagle Board uses OMAP3 (ARM-CortexA8) cpu
$

as in, note the references to OMAP34XX macros, not OMAP35XX. and
that's because, in include/configs/omap3_beagle.h, all of the references seem to be to OMAP34XX, such as:

/*
* High Level Configuration Options
*/

#define CONFIG_ARMCORTEXA8      1       /* This is an ARM V7 CPU core */
#define CONFIG_OMAP             1       /* in a TI OMAP core */
#define CONFIG_OMAP34XX         1       /* which is a 34XX */
#define CONFIG_OMAP3430         1       /* which is in a 3430 */
#define CONFIG_OMAP3_BEAGLE     1       /* working with BEAGLE */

almost all of the macros under include/asm/arch-omap3 are defined in
terms of OMAP34XX as well and while that may work fine for now, is there any chance that could cause conflicts down the road?

rday
--

========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA

Linux Consulting, Training and Kernel Pedantry.

Web page:                                          http://crashcourse.ca
Twitter:                                       http://twitter.com/rpjday

========================================================================

#1 lore raw
Quoted 26 lines · Robert P. J. Day

i asked about this on the beagleboard list but i figure i can ask
here as well. while the beagleboard is based on the OMAP3530, if you check out board/ti/beagle:

$ grep OMAP3 *
beagle.c:	gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE;
beagle.c:	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
beagle.c:	struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
beagle.c:	struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
beagle.h:	"OMAP3 Beagle board",
config.mk:# Beagle Board uses OMAP3 (ARM-CortexA8) cpu
$

as in, note the references to OMAP34XX macros, not OMAP35XX. and
that's because, in include/configs/omap3_beagle.h, all of the references seem to be to OMAP34XX, such as:

/*
* High Level Configuration Options
*/

#define CONFIG_ARMCORTEXA8      1       /* This is an ARM V7 CPU core */
#define CONFIG_OMAP             1       /* in a TI OMAP core */
#define CONFIG_OMAP34XX         1       /* which is a 34XX */
#define CONFIG_OMAP3430         1       /* which is in a 3430 */
#define CONFIG_OMAP3_BEAGLE     1       /* working with BEAGLE */
Quoted 3 lines

almost all of the macros under include/asm/arch-omap3 are defined in
terms of OMAP34XX as well and while that may work fine for now, is there any chance that could cause conflicts down the road?

Due to cross-posting answered at Beagle mailing list:

http://groups.google.com/group/beagleboard/browse_thread/thread/5813bff4b4d420c7

Dirk