Skip to contentSkip to conversation

hpt366: remove dead old timing tables

PATCH Applied Bartlomiej Zolnierkiewicz 4 participants 4 messages Nov 18, 2009 libata

lore
Share & tools
lore

Bartlomiej Zolnierkiewicz

author
#0 lore raw

PATCH 1/1 hpt366: remove dead old timing tables

It has been enough time since introduction of the new timing tables (commit 809b53c from Dec 12 2007) and the old timing tables are still available in pata_hpt37x.c (or git history) if somebody needs them.

Cc Sergei Shtylyov <[email protected]>
Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>
---
 drivers/ide/hpt366.c |   63 ---------------------------------------------------
 1 file changed, 63 deletions(-)
drivers/ide/hpt366.c +0 -63
Index: b/drivers/ide/hpt366.c
===================================================================
@@ -297,68 +297,6 @@ static u32 twenty_five_base_hpt36x[] = {
 	/* XFER_PIO_0 */	0xc0d08585
 };
 
-#if 0
-/* These are the timing tables from the HighPoint open source drivers... */
-static u32 thirty_three_base_hpt37x[] = {
-	/* XFER_UDMA_6 */	0x12446231,	/* 0x12646231 ?? */
-	/* XFER_UDMA_5 */	0x12446231,
-	/* XFER_UDMA_4 */	0x12446231,
-	/* XFER_UDMA_3 */	0x126c6231,
-	/* XFER_UDMA_2 */	0x12486231,
-	/* XFER_UDMA_1 */	0x124c6233,
-	/* XFER_UDMA_0 */	0x12506297,
-
-	/* XFER_MW_DMA_2 */	0x22406c31,
-	/* XFER_MW_DMA_1 */	0x22406c33,
-	/* XFER_MW_DMA_0 */	0x22406c97,
-
-	/* XFER_PIO_4 */	0x06414e31,
-	/* XFER_PIO_3 */	0x06414e42,
-	/* XFER_PIO_2 */	0x06414e53,
-	/* XFER_PIO_1 */	0x06814e93,
-	/* XFER_PIO_0 */	0x06814ea7
-};
-
-static u32 fifty_base_hpt37x[] = {
-	/* XFER_UDMA_6 */	0x12848242,
-	/* XFER_UDMA_5 */	0x12848242,
-	/* XFER_UDMA_4 */	0x12ac8242,
-	/* XFER_UDMA_3 */	0x128c8242,
-	/* XFER_UDMA_2 */	0x120c8242,
-	/* XFER_UDMA_1 */	0x12148254,
-	/* XFER_UDMA_0 */	0x121882ea,
-
-	/* XFER_MW_DMA_2 */	0x22808242,
-	/* XFER_MW_DMA_1 */	0x22808254,
-	/* XFER_MW_DMA_0 */	0x228082ea,
-
-	/* XFER_PIO_4 */	0x0a81f442,
-	/* XFER_PIO_3 */	0x0a81f443,
-	/* XFER_PIO_2 */	0x0a81f454,
-	/* XFER_PIO_1 */	0x0ac1f465,
-	/* XFER_PIO_0 */	0x0ac1f48a
-};
-
-static u32 sixty_six_base_hpt37x[] = {
-	/* XFER_UDMA_6 */	0x1c869c62,
-	/* XFER_UDMA_5 */	0x1cae9c62,	/* 0x1c8a9c62 */
-	/* XFER_UDMA_4 */	0x1c8a9c62,
-	/* XFER_UDMA_3 */	0x1c8e9c62,
-	/* XFER_UDMA_2 */	0x1c929c62,
-	/* XFER_UDMA_1 */	0x1c9a9c62,
-	/* XFER_UDMA_0 */	0x1c829c62,
-
-	/* XFER_MW_DMA_2 */	0x2c829c62,
-	/* XFER_MW_DMA_1 */	0x2c829c66,
-	/* XFER_MW_DMA_0 */	0x2c829d2e,
-
-	/* XFER_PIO_4 */	0x0c829c62,
-	/* XFER_PIO_3 */	0x0c829c84,
-	/* XFER_PIO_2 */	0x0c829ca6,
-	/* XFER_PIO_1 */	0x0d029d26,
-	/* XFER_PIO_0 */	0x0d029d5e
-};
-#else
 /*
  * The following are the new timing tables with PIO mode data/taskfile transfer
  * overclocking fixed...

@@ -424,7 +362,6 @@ static u32 sixty_six_base_hpt37x[] = {
 	/* XFER_PIO_1 */	0x0d02ff26,
 	/* XFER_PIO_0 */	0x0d42ff7f
 };
-#endif
 
 #define HPT366_DEBUG_DRIVE_INFO		0
 #define HPT371_ALLOW_ATA133_6		1
Acked-by on v1 1/1
#2 lore raw
In reply to Bartlomiej Zolnierkiewicz
Quoted 3 lines · On Wed, 18 Nov 2009 19:32:07 +0100 Bartlomiej Zolnierkiewicz…

It has been enough time since introduction of the new timing tables (commit 809b53c from Dec 12 2007) and the old timing tables are still available in pata_hpt37x.c (or git history) if somebody needs them.

(and in the HPT driver...)

Acked-by Alan Cox <[email protected]>