V4L-DVB modules not loading
Sorry, I don't know who to send this to. Not sure if it is a bug or not.
I followed your very helpful tutorial perfectly:
http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
but it hasn't quite worked.
I've built the module okay. It installed correctly and copied the files into /lib/modules/2.6.31-14-generic/kernel/drivers/media/dvb/dvb-usb. After that I rebooted (since it was easier for me). Then I got to the "If the Modules load correctly" section to find that nothing has worked at all.
I've checked my system log and it's recognising the USB device when I enter it but it isn't doing anything with it. The tutorial says you should be able to see the modules in /proc/modules but the modules folder doesn't even exist. The /dev/dvb/ folder has not been created either.
I have a EyeTV Diversity and have the antenna plugged in.
I will provide as much information as you need. I really want to get this working. :)
Thanks
~ Stacey
Quoted 11 lines · Stacey
I've built the module okay. It installed correctly and copied the files into
/lib/modules/2.6.31-14-generic/kernel/drivers/media/dvb/dvb-usb. After that I rebooted (since it was easier for me). Then I got to the "If the Modules load correctly" section to find that nothing has worked at all.I've checked my system log and it's recognising the USB device when I enter it but it isn't doing anything with it. The tutorial says you should be able to see the modules in
/proc/modulesbut the modules folder doesn't even exist. The/dev/dvb/folder has not been created either.
Could you post the output of dmesg (just run the command 'dmesg' from a terminal) to the list, that should give us an idea of what is going on. You might want to do this after a clean reboot (with the adapter plugged in) so that there isn't too much information to wade through.
Phil