OMAP3: add CM-T35 board
PATCH v6 1/1 OMAP3: add CM-T35 board
CM-T35 is a system-on-module board from CompuLab, Ltd. The CM-T35 datasheet can be found at
http://www.compulab.co.il/t35/html/t35-cm-datasheet.htm
--
v2 changes:
- rename board config file from omap3_cm-t35.h to cm-t35.h
- remove SZ_xx references
- add MAKEALL/MAINTEINERS entries
v3 changes:
- fix whitespace and indentation
- remove eth_init from board_eth_init
- add CM-T35 entry to doc/README.omap3
- fixed board name in MAINTAINERS
v4 changes:
- rebased agains u-boot-ti/next branch
v5 changes:
- rename board files to cm_t35
- add explicit setup of GPMC with SMNAND configuration
- reorginize Ethernet initialization so that I2C related code will depend on I2C initialization
v6 changes:
- remove unneeded externs from board configuration file
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 2 + board/cm_t35/Makefile | 47 ++++++++ board/cm_t35/cm_t35.c | 215 ++++++++++++++++++++++++++++++++++++ board/cm_t35/cm_t35.h | 173 +++++++++++++++++++++++++++++ board/cm_t35/config.mk | 30 +++++ doc/README.omap3 | 16 +++- include/configs/cm_t35.h | 276 ++++++++++++++++++++++++++++++++++++++++++++++ 9 files changed, 762 insertions(+), 2 deletions(-) create mode 100644 board/cm_t35/Makefile create mode 100644 board/cm_t35/cm_t35.c create mode 100644 board/cm_t35/cm_t35.h create mode 100644 board/cm_t35/config.mk create mode 100644 include/configs/cm_t35.h
MAINTAINERS +4 -0
@@ -677,6 +677,10 @@ Stelian Pop <[email protected]> at91sam9263ek ARM926EJS (AT91SAM9263 SoC) at91sam9rlek ARM926EJS (AT91SAM9RL SoC) +Mike Rapoport <[email protected]> + + cm_t35 ARM CORTEX-A8 (OMAP3xx SoC) + Tom Rix <[email protected]> omap3_zoom2 ARM CORTEX-A8 (OMAP3xx SoC)
MAKEALL +1 -0
@@ -612,6 +612,7 @@ LIST_ARM11=" \ ## ARM Cortex-A8 Systems ######################################################################### LIST_ARM_CORTEX_A8=" \ + cm_t35 \ devkit8000 \ omap3_beagle \ omap3_overo \
Makefile +2 -0
@@ -3143,6 +3143,8 @@ SMN42_config : unconfig ######################################################################### ## ARM CORTEX Systems ######################################################################### +cm_t35_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm_t35 NULL omap3 devkit8000_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
board/cm_t35/Makefile new file +47 -0
47 lines not on this page · raw message
board/cm_t35/cm_t35.c new file +215 -0
215 lines not on this page · raw message
board/cm_t35/cm_t35.h new file +173 -0
173 lines not on this page · raw message
board/cm_t35/config.mk new file +30 -0
@@ -0,0 +1,30 @@ +# +# (C) Copyright 2009 +# CompuLab, Ltd., <www.compulab.co.il> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000
doc/README.omap3 +14 -2
@@ -21,6 +21,8 @@ Currently the following boards are supported: * TI/Logic PD Zoom 2 [7] +* CompuLab Ltd. CM-T35 [8] + Toolchain =========
@@ -61,6 +63,11 @@ make make omap3_zoom2_config make +* CM-T35: + +make cm_t35_config +make + Custom commands ===============
@@ -119,7 +126,7 @@ To read a bit : Acknowledgements ================ -OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by +OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by several TI employees. Links
@@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit [7] TI/Logic PD Zoom 2 http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf -[8] TI OMAP3 U-Boot: + +[8] CompuLab Ltd. CM-T35: + +http://www.compulab.co.il/t35/html/t35-cm-datasheet.htm + +[9] TI OMAP3 U-Boot: http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
include/configs/cm_t35.h new file +276 -0
276 lines not on this page · raw message
Signature · 1 line
1.6.4.4
PATCH v6 1/1 OMAP3: add CM-T35 board
Quoted 6 lines · Mike Rapoport
CM-T35 is a system-on-module board from CompuLab, Ltd. The CM-T35 datasheet can be found at
http://www.compulab.co.il/t35/html/t35-cm-datasheet.htmSigned-off-by Mike Rapoport <[email protected]>
Any updates on this?
PATCH v6 1/1 OMAP3: add CM-T35 board
Quoted 9 lines · Mike Rapoport
Quoted 6 lines · Mike Rapoport
CM-T35 is a system-on-module board from CompuLab, Ltd. The CM-T35 datasheet can be found at
http://www.compulab.co.il/t35/html/t35-cm-datasheet.htmSigned-off-by Mike Rapoport <[email protected]>
Any updates on this?
Quoted 6 lines
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
Sincerely yours, Mike.