Skip to contentSkip to conversation

ARM: NUC900: add RTC driver support for nuc910 and nuc920

PATCH Superseded Wan ZongShun 3 participants 5 messages Nov 25, 2009 – Nov 26, 2009 Real time clock (RTC)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ARM: NUC900: add RTC driver support for nuc910 and nuc920

Dear Alessandro,

This is a fixed patch which was tested via rtc test program located in Documentation/rtc.txt.

Thanks for your help.

---
 drivers/rtc/Kconfig      |    6 +
 drivers/rtc/Makefile     |    1 +
 drivers/rtc/rtc-nuc900.c |  334 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 341 insertions(+), 0 deletions(-)
 create mode 100644 drivers/rtc/rtc-nuc900.c
drivers/rtc/Kconfig +6 -0
index 3c20dae..266ce62 100644
@@ -573,6 +573,12 @@ config RTC_DRV_AB3100
 	  Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
 	  support. This chip contains a battery- and capacitor-backed RTC.
 
+config RTC_DRV_NUC900
+	tristate "NUC910/NUC920 RTC driver"
+	depends on RTC_CLASS && ARCH_W90X900
+	help
+	  If you say yes here you get support for the RTC subsystem of the
+	  NUC910/NUC920 used in embedded systems.
 
 comment "on-CPU RTC drivers"
 
drivers/rtc/Makefile +1 -0
index aa3fbd5..d511774 100644
@@ -53,6 +53,7 @@ obj-$(CONFIG_RTC_MXC)		+= rtc-mxc.o
 obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
 obj-$(CONFIG_RTC_DRV_MAX6902)	+= rtc-max6902.o
 obj-$(CONFIG_RTC_DRV_MV)	+= rtc-mv.o
+obj-$(CONFIG_RTC_DRV_NUC900)	+= rtc-nuc900.o
 obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o
 obj-$(CONFIG_RTC_DRV_PCAP)	+= rtc-pcap.o
 obj-$(CONFIG_RTC_DRV_PCF8563)	+= rtc-pcf8563.o
drivers/rtc/rtc-nuc900.c new file +334 -0

334 lines not on this page · raw message

Signature · 1 line
1.5.6.3
#1 lore raw
Quoted 178 lines

Dear Alessandro,

This is a fixed patch which was tested via rtc test program located in Documentation/rtc.txt.

Thanks for your help.

---
 drivers/rtc/Kconfig      |    6 +
 drivers/rtc/Makefile     |    1 +
 drivers/rtc/rtc-nuc900.c |  334 ++++++++++++++++++++++++++++++++++++++++++++++

 3 files changed, 341 insertions(+), 0 deletions(-)

 create mode 100644 drivers/rtc/rtc-nuc900.c

drivers/rtc/Kconfig +0 -0
index 3c20dae..266ce62 100644
@@ -573,6 +573,12 @@ config RTC_DRV_AB3100

         Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC support. This chip contains a battery- and capacitor-backed RTC.

+config RTC_DRV_NUC900
+       tristate "NUC910/NUC920 RTC driver"
+       depends on RTC_CLASS && ARCH_W90X900
+       help
+         If you say yes here you get support for the RTC subsystem of the
+         NUC910/NUC920 used in embedded systems.

 comment "on-CPU RTC drivers"

drivers/rtc/Makefile +0 -0
index aa3fbd5..d511774 100644
@@ -53,6 +53,7 @@ obj-$(CONFIG_RTC_MXC)         += rtc-mxc.o

 obj-$(CONFIG_RTC_DRV_MAX6900)  += rtc-max6900.o
 obj-$(CONFIG_RTC_DRV_MAX6902)  += rtc-max6902.o
 obj-$(CONFIG_RTC_DRV_MV)       += rtc-mv.o
+obj-$(CONFIG_RTC_DRV_NUC900)   += rtc-nuc900.o
 obj-$(CONFIG_RTC_DRV_OMAP)     += rtc-omap.o
 obj-$(CONFIG_RTC_DRV_PCAP)     += rtc-pcap.o
 obj-$(CONFIG_RTC_DRV_PCF8563)  += rtc-pcf8563.o

drivers/rtc/rtc-nuc900.c new file +129 -0
new file mode 100644
index 0000000..09383e2
@@ -0,0 +1,334 @@
+/*
+ * Copyright (c) 2008-2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/bcd.h>
+
+/* RTC Control Registers */
+#define REG_RTC_INIR           0x00
+#define REG_RTC_AER            0x04
+#define REG_RTC_FCR            0x08
+#define REG_RTC_TLR            0x0C
+#define REG_RTC_CLR            0x10
+#define REG_RTC_TSSR           0x14
+#define REG_RTC_DWR            0x18
+#define REG_RTC_TAR            0x1C
+#define REG_RTC_CAR            0x20
+#define REG_RTC_LIR            0x24
+#define REG_RTC_RIER           0x28
+#define REG_RTC_RIIR           0x2C
+#define REG_RTC_TTR            0x30
+
+#define RTCSET                 0x01
+#define AERRWENB               0x10000
+#define INIRRESET              0xa5eb1357
+#define AERPOWERON             0xA965
+#define AERPOWEROFF            0x0000
+#define LEAPYEAR               0x0001
+#define TICKENB                        0x80
+#define TICKINTENB             0x0002
+#define ALARMINTENB            0x0001
+#define MODE24                 0x0001
+
+struct nuc900_rtc {
+       int                     irq_num;
+       void __iomem            *rtc_reg;
+       struct rtc_device       *rtcdev;
+       spinlock_t              lock;
+};
+
+struct nuc900_bcd_time {
+       int bcd_sec;
+       int bcd_min;
+       int bcd_hour;
+       int bcd_mday;
+       int bcd_mon;
+       int bcd_year;
+};
+
+static irqreturn_t nuc900_rtc_interrupt(int irq, void *_rtc)
+{
+       struct nuc900_rtc *rtc = _rtc;
+       unsigned long events = 0, rtc_irq;
+
+       rtc_irq = __raw_readl(rtc->rtc_reg + REG_RTC_RIIR);
+
+       if (rtc_irq & ALARMINTENB) {
+               rtc_irq &= ~ALARMINTENB;
+               __raw_writel(rtc_irq, rtc->rtc_reg + REG_RTC_RIIR);
+               events |= RTC_AF | RTC_IRQF;
+       }
+
+       if (rtc_irq & TICKINTENB) {
+               rtc_irq &= ~TICKINTENB;
+               __raw_writel(rtc_irq, rtc->rtc_reg + REG_RTC_RIIR);
+               events |= RTC_UF | RTC_IRQF;
+       }
+
+       rtc_update_irq(rtc->rtcdev, 1, events);
+
+       return IRQ_HANDLED;
+}
+
+static void check_rtc_power(struct nuc900_rtc *nuc900_rtc)
+{
+       unsigned int i;
+       __raw_writel(INIRRESET, nuc900_rtc->rtc_reg + REG_RTC_INIR);
+
+       mdelay(10);
+
+       __raw_writel(AERPOWERON, nuc900_rtc->rtc_reg + REG_RTC_AER);
+
+       for (i = 0; i < 1000000; i++) {
+               if (__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_AER) & AERRWENB)
+                       break;
+       }
+}
+
+static void nuc900_rtc_bcd2bin(unsigned int timereg,
+                               unsigned int calreg, struct rtc_time *tm)
+{
+       tm->tm_mday     = bcd2bin(calreg >> 0);
+       tm->tm_mon      = bcd2bin(calreg >> 8);
+       tm->tm_year     = bcd2bin(calreg >> 16) + 100;
+
+       tm->tm_sec      = bcd2bin(timereg >> 0);
+       tm->tm_min      = bcd2bin(timereg >> 8);
+       tm->tm_hour     = bcd2bin(timereg >> 16);
+
+       rtc_valid_tm(tm);
+}
+
+static void nuc900_rtc_bin2bcd(struct rtc_time *settm,
+                                               struct nuc900_bcd_time *gettm)
+{
+       gettm->bcd_mday = bin2bcd(settm->tm_mday) << 0;
+       gettm->bcd_mon  = bin2bcd(settm->tm_mon) << 8;
+       gettm->bcd_year = bin2bcd(settm->tm_year - 100) << 16;
+
+       gettm->bcd_sec  = bin2bcd(settm->tm_sec) << 0;
+       gettm->bcd_min  = bin2bcd(settm->tm_min) << 8;
+       gettm->bcd_hour = bin2bcd(settm->tm_hour) << 16;
+}
+
+static int nuc900_update_irq_enable(struct device *dev, unsigned int enabled)
+{
+       struct nuc900_rtc *rtc = dev_get_drvdata(dev);

drivers/rtc/rtc-nuc900.c line 139

Quoted 10 lines
drivers/rtc/rtc-nuc900.c new file +10 -0
+
+       if (enabled)
+               __raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)|
+                               (TICKINTENB), rtc->rtc_reg + REG_RTC_RIER);
+       else
+               __raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)&
+                               (~TICKINTENB), rtc->rtc_reg + REG_RTC_RIER);
+
+       return 0;
+}

I think you should lock irq before the serial read and write to the REG_RTC_RIER register.

Quoted 5 lines
drivers/rtc/rtc-nuc900.c new file +5 -0
+
+static int nuc900_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+       struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+

drivers/rtc/rtc-nuc900.c line 154

Quoted 10 lines
drivers/rtc/rtc-nuc900.c new file +10 -0
+       if (enabled)
+               __raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)|
+                               (ALARMINTENB), rtc->rtc_reg + REG_RTC_RIER);
+       else
+               __raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)&
+                               (~ALARMINTENB), rtc->rtc_reg + REG_RTC_RIER);
+
+       return 0;
+}
+

ditto

#2 lore raw
Quoted 2 lines · On Wed, 25 Nov 2009 20:51:24 +0800 Hu Ruihuan <[email protected]> wrote:

I think you should lock irq before the serial read and write to the REG_RTC_RIER register.

the lock seems not used anymore. the rtc framework has some locking of his own, driver authors are suggested to check if it's enough.

Signature · 6 lines
 Best regards,

 Alessandro Zummo,
  Tower Technologies - Torino, Italy

  http://www.towertech.it
#3 lore raw
In reply to Wan ZongShun
Quoted 6 lines · On Wed, 25 Nov 2009 20:15:55 +0800 Wan ZongShun <[email protected]> wrote:

Dear Alessandro,

This is a fixed patch which was tested via rtc test program located in Documentation/rtc.txt.

Thanks for your help.

Hi, a few more notes below

Quoted 83 lines
---
 drivers/rtc/Kconfig      |    6 +
 drivers/rtc/Makefile     |    1 +
 drivers/rtc/rtc-nuc900.c |  334 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 341 insertions(+), 0 deletions(-)
 create mode 100644 drivers/rtc/rtc-nuc900.c
drivers/rtc/Kconfig +6 -0
index 3c20dae..266ce62 100644
@@ -573,6 +573,12 @@ config RTC_DRV_AB3100
 	  Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
 	  support. This chip contains a battery- and capacitor-backed RTC.
 
+config RTC_DRV_NUC900
+	tristate "NUC910/NUC920 RTC driver"
+	depends on RTC_CLASS && ARCH_W90X900
+	help
+	  If you say yes here you get support for the RTC subsystem of the
+	  NUC910/NUC920 used in embedded systems.
 
 comment "on-CPU RTC drivers"
 
drivers/rtc/Makefile +1 -0
index aa3fbd5..d511774 100644
@@ -53,6 +53,7 @@ obj-$(CONFIG_RTC_MXC)		+= rtc-mxc.o
 obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
 obj-$(CONFIG_RTC_DRV_MAX6902)	+= rtc-max6902.o
 obj-$(CONFIG_RTC_DRV_MV)	+= rtc-mv.o
+obj-$(CONFIG_RTC_DRV_NUC900)	+= rtc-nuc900.o
 obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o
 obj-$(CONFIG_RTC_DRV_PCAP)	+= rtc-pcap.o
 obj-$(CONFIG_RTC_DRV_PCF8563)	+= rtc-pcf8563.o
drivers/rtc/rtc-nuc900.c new file +40 -0
new file mode 100644
index 0000000..09383e2
@@ -0,0 +1,334 @@
+/*
+ * Copyright (c) 2008-2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/bcd.h>
+
+/* RTC Control Registers */
+#define REG_RTC_INIR		0x00
+#define REG_RTC_AER		0x04
+#define REG_RTC_FCR		0x08
+#define REG_RTC_TLR		0x0C
+#define REG_RTC_CLR		0x10
+#define REG_RTC_TSSR		0x14
+#define REG_RTC_DWR		0x18
+#define REG_RTC_TAR		0x1C
+#define REG_RTC_CAR		0x20
+#define REG_RTC_LIR		0x24
+#define REG_RTC_RIER		0x28
+#define REG_RTC_RIIR		0x2C
+#define REG_RTC_TTR		0x30
+
+#define RTCSET			0x01
+#define AERRWENB		0x10000
+#define INIRRESET		0xa5eb1357
+#define AERPOWERON		0xA965
+#define AERPOWEROFF		0x0000
+#define LEAPYEAR		0x0001

drivers/rtc/rtc-nuc900.c line 50

Quoted 10 lines
drivers/rtc/rtc-nuc900.c new file +10 -0
+#define TICKENB			0x80
+#define TICKINTENB		0x0002
+#define ALARMINTENB		0x0001
+#define MODE24			0x0001
+
+struct nuc900_rtc {
+	int			irq_num;
+	void __iomem		*rtc_reg;
+	struct rtc_device	*rtcdev;
+	spinlock_t		lock;

used?

Quoted 220 lines
drivers/rtc/rtc-nuc900.c new file +220 -0
+};
+
+struct nuc900_bcd_time {
+	int bcd_sec;
+	int bcd_min;
+	int bcd_hour;
+	int bcd_mday;
+	int bcd_mon;
+	int bcd_year;
+};
+
+static irqreturn_t nuc900_rtc_interrupt(int irq, void *_rtc)
+{
+	struct nuc900_rtc *rtc = _rtc;
+	unsigned long events = 0, rtc_irq;
+
+	rtc_irq = __raw_readl(rtc->rtc_reg + REG_RTC_RIIR);
+
+	if (rtc_irq & ALARMINTENB) {
+		rtc_irq &= ~ALARMINTENB;
+		__raw_writel(rtc_irq, rtc->rtc_reg + REG_RTC_RIIR);
+		events |= RTC_AF | RTC_IRQF;
+	}
+
+	if (rtc_irq & TICKINTENB) {
+		rtc_irq &= ~TICKINTENB;
+		__raw_writel(rtc_irq, rtc->rtc_reg + REG_RTC_RIIR);
+		events |= RTC_UF | RTC_IRQF;
+	}
+
+	rtc_update_irq(rtc->rtcdev, 1, events);
+
+	return IRQ_HANDLED;
+}
+
+static void check_rtc_power(struct nuc900_rtc *nuc900_rtc)
+{
+	unsigned int i;
+	__raw_writel(INIRRESET, nuc900_rtc->rtc_reg + REG_RTC_INIR);
+
+	mdelay(10);
+
+	__raw_writel(AERPOWERON, nuc900_rtc->rtc_reg + REG_RTC_AER);
+
+	for (i = 0; i < 1000000; i++) {
+		if (__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_AER) & AERRWENB)
+			break;
+	}
+}
+
+static void nuc900_rtc_bcd2bin(unsigned int timereg,
+				unsigned int calreg, struct rtc_time *tm)
+{
+	tm->tm_mday	= bcd2bin(calreg >> 0);
+	tm->tm_mon	= bcd2bin(calreg >> 8);
+	tm->tm_year	= bcd2bin(calreg >> 16) + 100;
+
+	tm->tm_sec	= bcd2bin(timereg >> 0);
+	tm->tm_min	= bcd2bin(timereg >> 8);
+	tm->tm_hour	= bcd2bin(timereg >> 16);
+
+	rtc_valid_tm(tm);
+}
+
+static void nuc900_rtc_bin2bcd(struct rtc_time *settm,
+						struct nuc900_bcd_time *gettm)
+{
+	gettm->bcd_mday = bin2bcd(settm->tm_mday) << 0;
+	gettm->bcd_mon  = bin2bcd(settm->tm_mon) << 8;
+	gettm->bcd_year = bin2bcd(settm->tm_year - 100) << 16;
+
+	gettm->bcd_sec  = bin2bcd(settm->tm_sec) << 0;
+	gettm->bcd_min  = bin2bcd(settm->tm_min) << 8;
+	gettm->bcd_hour = bin2bcd(settm->tm_hour) << 16;
+}
+
+static int nuc900_update_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+
+	if (enabled)
+		__raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)|
+				(TICKINTENB), rtc->rtc_reg + REG_RTC_RIER);
+	else
+		__raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)&
+				(~TICKINTENB), rtc->rtc_reg + REG_RTC_RIER);
+
+	return 0;
+}
+
+static int nuc900_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+
+	if (enabled)
+		__raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)|
+				(ALARMINTENB), rtc->rtc_reg + REG_RTC_RIER);
+	else
+		__raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)&
+				(~ALARMINTENB), rtc->rtc_reg + REG_RTC_RIER);
+
+	return 0;
+}
+
+static int nuc900_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int timeval, clrval;
+
+	timeval = __raw_readl(rtc->rtc_reg + REG_RTC_TLR);
+	clrval	= __raw_readl(rtc->rtc_reg + REG_RTC_CLR);
+
+	nuc900_rtc_bcd2bin(timeval, clrval, tm);
+
+	return 0;
+}
+
+static int nuc900_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+	struct nuc900_bcd_time gettm;
+	unsigned long val;
+
+	nuc900_rtc_bin2bcd(tm, &gettm);
+
+	check_rtc_power(rtc);
+
+	val = gettm.bcd_mday | gettm.bcd_mon | gettm.bcd_year;
+	__raw_writel(val, rtc->rtc_reg + REG_RTC_CLR);
+
+	val = gettm.bcd_sec | gettm.bcd_min | gettm.bcd_hour;
+	__raw_writel(val, rtc->rtc_reg + REG_RTC_TLR);
+
+	return 0;
+}
+
+static int nuc900_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int timeval, carval;
+
+	timeval = __raw_readl(rtc->rtc_reg + REG_RTC_TAR);
+	carval	= __raw_readl(rtc->rtc_reg + REG_RTC_CAR);
+
+	nuc900_rtc_bcd2bin(timeval, carval, &alrm->time);
+
+	return 0;
+}
+
+static int nuc900_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+	struct nuc900_bcd_time tm;
+	unsigned long val;
+
+	nuc900_rtc_bin2bcd(&alrm->time, &tm);
+
+	check_rtc_power(rtc);
+
+	val = tm.bcd_mday | tm.bcd_mon | tm.bcd_year;
+	__raw_writel(val, rtc->rtc_reg + REG_RTC_CAR);
+
+	val = tm.bcd_sec | tm.bcd_min | tm.bcd_hour;
+	__raw_writel(val, rtc->rtc_reg + REG_RTC_TAR);
+
+	return 0;
+}
+
+static struct rtc_class_ops nuc900_rtc_ops = {
+	.read_time = nuc900_rtc_read_time,
+	.set_time = nuc900_rtc_set_time,
+	.read_alarm = nuc900_rtc_read_alarm,
+	.set_alarm = nuc900_rtc_set_alarm,
+	.alarm_irq_enable = nuc900_alarm_irq_enable,
+	.update_irq_enable = nuc900_update_irq_enable,
+};
+
+static int __devinit nuc900_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct nuc900_rtc *nuc900_rtc;
+	int err = 0;
+
+	nuc900_rtc = kzalloc(sizeof(struct nuc900_rtc), GFP_KERNEL);
+	if (!nuc900_rtc) {
+		dev_err(&pdev->dev, "kzalloc nuc900_rtc failed\n");
+		return -ENOMEM;
+	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "platform_get_resource failed\n");
+		err = -ENXIO;
+		goto fail1;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+				pdev->name)) {
+		dev_err(&pdev->dev, "request_mem_region failed\n");
+		err = -EBUSY;
+		goto fail1;
+	}
+
+	nuc900_rtc->rtc_reg = ioremap(res->start, resource_size(res));
+	if (!nuc900_rtc->rtc_reg) {
+		dev_err(&pdev->dev, "ioremap rtc_reg failed\n");
+		err = -ENOMEM;
+		goto fail2;
+	}
+
+	nuc900_rtc->irq_num = platform_get_irq(pdev, 0);
+	if (request_irq(nuc900_rtc->irq_num, nuc900_rtc_interrupt,
+				IRQF_DISABLED, "nuc900rtc", nuc900_rtc)) {
+		dev_err(&pdev->dev, "NUC900 RTC request irq failed\n");
+		err = -EBUSY;
+		goto fail3;
+	}
+
+	nuc900_rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev,
+						&nuc900_rtc_ops, THIS_MODULE);
+	if (IS_ERR(nuc900_rtc->rtcdev)) {

drivers/rtc/rtc-nuc900.c line 280

Quoted 10 lines
drivers/rtc/rtc-nuc900.c new file +10 -0
+		dev_err(&pdev->dev, "rtc device register faild\n");
+		err = PTR_ERR(nuc900_rtc->rtcdev);
+		goto fail4;
+	}
+
+	platform_set_drvdata(pdev, nuc900_rtc);
+	__raw_writel(__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_TSSR) | MODE24,
+					nuc900_rtc->rtc_reg + REG_RTC_TSSR);
+
+	dev_info(&pdev->dev, "NUC900 RTC device probe successfully\n");

no banners, rtc framwork will announce the rtc

Quoted 20 lines
drivers/rtc/rtc-nuc900.c new file +20 -0
+	return 0;
+
+fail4:	free_irq(nuc900_rtc->irq_num, nuc900_rtc);
+fail3:	iounmap(nuc900_rtc->rtc_reg);
+fail2:	release_mem_region(res->start, resource_size(res));
+fail1:	kfree(nuc900_rtc);
+	return err;
+}
+
+static int __devexit nuc900_rtc_remove(struct platform_device *pdev)
+{
+	struct nuc900_rtc *nuc900_rtc = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	rtc_device_unregister(nuc900_rtc->rtcdev);
+	free_irq(nuc900_rtc->irq_num, nuc900_rtc);
+	iounmap(nuc900_rtc->rtc_reg);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));

drivers/rtc/rtc-nuc900.c line 311

Quoted 10 lines
drivers/rtc/rtc-nuc900.c new file +10 -0
+
+	kfree(nuc900_rtc);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver nuc900_rtc_driver = {
+	.remove		= __devexit_p(nuc900_rtc_remove),

__devexit_p is incoherent with the definition below

Quoted 25 lines
drivers/rtc/rtc-nuc900.c new file +23 -0
+	.driver		= {
+		.name	= "nuc900-rtc",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init nuc900_rtc_init(void)
+{
+	return platform_driver_probe(&nuc900_rtc_driver, nuc900_rtc_probe);
+}
+
+static void __exit nuc900_rtc_exit(void)
+{
+	platform_driver_unregister(&nuc900_rtc_driver);
+}
+
+module_init(nuc900_rtc_init);
+module_exit(nuc900_rtc_exit);
+
+MODULE_AUTHOR("Wan ZongShun <[email protected]>");
+MODULE_DESCRIPTION("nuc910/nuc920 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-rtc");
Signature · 1 line
1.5.6.3
Signature · 6 lines
 Best regards,

 Alessandro Zummo,
  Tower Technologies - Torino, Italy

  http://www.towertech.it
#4 lore raw

2009/11/25 Alessandro Zummo <[email protected]>:

Quoted 365 lines
Quoted 6 lines · On Wed, 25 Nov 2009 20:15:55 +0800 Wan ZongShun <[email protected]> wrote:

Dear Alessandro,

This is a fixed patch which was tested via rtc test program located in Documentation/rtc.txt.

Thanks for your help.

 Hi,  a few more notes below

Quoted 83 lines

---
 drivers/rtc/Kconfig      |    6 +
 drivers/rtc/Makefile     |    1 +
 drivers/rtc/rtc-nuc900.c |  334 ++++++++++++++++++++++++++++++++++++++++++++++

 3 files changed, 341 insertions(+), 0 deletions(-)

 create mode 100644 drivers/rtc/rtc-nuc900.c

drivers/rtc/Kconfig +0 -0
index 3c20dae..266ce62 100644
@@ -573,6 +573,12 @@ config RTC_DRV_AB3100

        Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC support. This chip contains a battery- and capacitor-backed RTC.

+config RTC_DRV_NUC900
+     tristate "NUC910/NUC920 RTC driver"
+     depends on RTC_CLASS && ARCH_W90X900
+     help
+       If you say yes here you get support for the RTC subsystem of the
+       NUC910/NUC920 used in embedded systems.

 comment "on-CPU RTC drivers"

drivers/rtc/Makefile +0 -0
index aa3fbd5..d511774 100644
@@ -53,6 +53,7 @@ obj-$(CONFIG_RTC_MXC)               += rtc-mxc.o

 obj-$(CONFIG_RTC_DRV_MAX6900)        += rtc-max6900.o obj-$(CONFIG_RTC_DRV_MAX6902)        += rtc-max6902.o obj-$(CONFIG_RTC_DRV_MV)     += rtc-mv.o +obj-$(CONFIG_RTC_DRV_NUC900) += rtc-nuc900.o obj-$(CONFIG_RTC_DRV_OMAP)   += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCAP)   += rtc-pcap.o obj-$(CONFIG_RTC_DRV_PCF8563)        += rtc-pcf8563.o

drivers/rtc/rtc-nuc900.c new file +40 -0
new file mode 100644
index 0000000..09383e2
@@ -0,0 +1,334 @@
+/*
+ * Copyright (c) 2008-2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/bcd.h>
+
+/* RTC Control Registers */
+#define REG_RTC_INIR         0x00
+#define REG_RTC_AER          0x04
+#define REG_RTC_FCR          0x08
+#define REG_RTC_TLR          0x0C
+#define REG_RTC_CLR          0x10
+#define REG_RTC_TSSR         0x14
+#define REG_RTC_DWR          0x18
+#define REG_RTC_TAR          0x1C
+#define REG_RTC_CAR          0x20
+#define REG_RTC_LIR          0x24
+#define REG_RTC_RIER         0x28
+#define REG_RTC_RIIR         0x2C
+#define REG_RTC_TTR          0x30
+
+#define RTCSET                       0x01
+#define AERRWENB             0x10000
+#define INIRRESET            0xa5eb1357
+#define AERPOWERON           0xA965
+#define AERPOWEROFF          0x0000
+#define LEAPYEAR             0x0001

drivers/rtc/rtc-nuc900.c line 50

Quoted 10 lines
drivers/rtc/rtc-nuc900.c new file +10 -0
+#define TICKENB                      0x80
+#define TICKINTENB           0x0002
+#define ALARMINTENB          0x0001
+#define MODE24                       0x0001
+
+struct nuc900_rtc {
+     int                     irq_num;
+     void __iomem            *rtc_reg;
+     struct rtc_device       *rtcdev;
+     spinlock_t              lock;

 used?

Quoted 220 lines
drivers/rtc/rtc-nuc900.c new file +220 -0
+};
+
+struct nuc900_bcd_time {
+     int bcd_sec;
+     int bcd_min;
+     int bcd_hour;
+     int bcd_mday;
+     int bcd_mon;
+     int bcd_year;
+};
+
+static irqreturn_t nuc900_rtc_interrupt(int irq, void *_rtc)
+{
+     struct nuc900_rtc *rtc = _rtc;
+     unsigned long events = 0, rtc_irq;
+
+     rtc_irq = __raw_readl(rtc->rtc_reg + REG_RTC_RIIR);
+
+     if (rtc_irq & ALARMINTENB) {
+             rtc_irq &= ~ALARMINTENB;
+             __raw_writel(rtc_irq, rtc->rtc_reg + REG_RTC_RIIR);
+             events |= RTC_AF | RTC_IRQF;
+     }
+
+     if (rtc_irq & TICKINTENB) {
+             rtc_irq &= ~TICKINTENB;
+             __raw_writel(rtc_irq, rtc->rtc_reg + REG_RTC_RIIR);
+             events |= RTC_UF | RTC_IRQF;
+     }
+
+     rtc_update_irq(rtc->rtcdev, 1, events);
+
+     return IRQ_HANDLED;
+}
+
+static void check_rtc_power(struct nuc900_rtc *nuc900_rtc)
+{
+     unsigned int i;
+     __raw_writel(INIRRESET, nuc900_rtc->rtc_reg + REG_RTC_INIR);
+
+     mdelay(10);
+
+     __raw_writel(AERPOWERON, nuc900_rtc->rtc_reg + REG_RTC_AER);
+
+     for (i = 0; i < 1000000; i++) {
+             if (__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_AER) & AERRWENB)
+                     break;
+     }
+}
+
+static void nuc900_rtc_bcd2bin(unsigned int timereg,
+                             unsigned int calreg, struct rtc_time *tm)
+{
+     tm->tm_mday     = bcd2bin(calreg >> 0);
+     tm->tm_mon      = bcd2bin(calreg >> 8);
+     tm->tm_year     = bcd2bin(calreg >> 16) + 100;
+
+     tm->tm_sec      = bcd2bin(timereg >> 0);
+     tm->tm_min      = bcd2bin(timereg >> 8);
+     tm->tm_hour     = bcd2bin(timereg >> 16);
+
+     rtc_valid_tm(tm);
+}
+
+static void nuc900_rtc_bin2bcd(struct rtc_time *settm,
+                                             struct nuc900_bcd_time *gettm)
+{
+     gettm->bcd_mday = bin2bcd(settm->tm_mday) << 0;
+     gettm->bcd_mon  = bin2bcd(settm->tm_mon) << 8;
+     gettm->bcd_year = bin2bcd(settm->tm_year - 100) << 16;
+
+     gettm->bcd_sec  = bin2bcd(settm->tm_sec) << 0;
+     gettm->bcd_min  = bin2bcd(settm->tm_min) << 8;
+     gettm->bcd_hour = bin2bcd(settm->tm_hour) << 16;
+}
+
+static int nuc900_update_irq_enable(struct device *dev, unsigned int enabled)
+{
+     struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+
+     if (enabled)
+             __raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)|
+                             (TICKINTENB), rtc->rtc_reg + REG_RTC_RIER);
+     else
+             __raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)&
+                             (~TICKINTENB), rtc->rtc_reg + REG_RTC_RIER);
+
+     return 0;
+}
+
+static int nuc900_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+     struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+
+     if (enabled)
+             __raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)|
+                             (ALARMINTENB), rtc->rtc_reg + REG_RTC_RIER);
+     else
+             __raw_writel(__raw_readl(rtc->rtc_reg + REG_RTC_RIER)&
+                             (~ALARMINTENB), rtc->rtc_reg + REG_RTC_RIER);
+
+     return 0;
+}
+
+static int nuc900_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+     struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+     unsigned int timeval, clrval;
+
+     timeval = __raw_readl(rtc->rtc_reg + REG_RTC_TLR);
+     clrval  = __raw_readl(rtc->rtc_reg + REG_RTC_CLR);
+
+     nuc900_rtc_bcd2bin(timeval, clrval, tm);
+
+     return 0;
+}
+
+static int nuc900_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+     struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+     struct nuc900_bcd_time gettm;
+     unsigned long val;
+
+     nuc900_rtc_bin2bcd(tm, &gettm);
+
+     check_rtc_power(rtc);
+
+     val = gettm.bcd_mday | gettm.bcd_mon | gettm.bcd_year;
+     __raw_writel(val, rtc->rtc_reg + REG_RTC_CLR);
+
+     val = gettm.bcd_sec | gettm.bcd_min | gettm.bcd_hour;
+     __raw_writel(val, rtc->rtc_reg + REG_RTC_TLR);
+
+     return 0;
+}
+
+static int nuc900_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+     struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+     unsigned int timeval, carval;
+
+     timeval = __raw_readl(rtc->rtc_reg + REG_RTC_TAR);
+     carval  = __raw_readl(rtc->rtc_reg + REG_RTC_CAR);
+
+     nuc900_rtc_bcd2bin(timeval, carval, &alrm->time);
+
+     return 0;
+}
+
+static int nuc900_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+     struct nuc900_rtc *rtc = dev_get_drvdata(dev);
+     struct nuc900_bcd_time tm;
+     unsigned long val;
+
+     nuc900_rtc_bin2bcd(&alrm->time, &tm);
+
+     check_rtc_power(rtc);
+
+     val = tm.bcd_mday | tm.bcd_mon | tm.bcd_year;
+     __raw_writel(val, rtc->rtc_reg + REG_RTC_CAR);
+
+     val = tm.bcd_sec | tm.bcd_min | tm.bcd_hour;
+     __raw_writel(val, rtc->rtc_reg + REG_RTC_TAR);
+
+     return 0;
+}
+
+static struct rtc_class_ops nuc900_rtc_ops = {
+     .read_time = nuc900_rtc_read_time,
+     .set_time = nuc900_rtc_set_time,
+     .read_alarm = nuc900_rtc_read_alarm,
+     .set_alarm = nuc900_rtc_set_alarm,
+     .alarm_irq_enable = nuc900_alarm_irq_enable,
+     .update_irq_enable = nuc900_update_irq_enable,
+};
+
+static int __devinit nuc900_rtc_probe(struct platform_device *pdev)
+{
+     struct resource *res;
+     struct nuc900_rtc *nuc900_rtc;
+     int err = 0;
+
+     nuc900_rtc = kzalloc(sizeof(struct nuc900_rtc), GFP_KERNEL);
+     if (!nuc900_rtc) {
+             dev_err(&pdev->dev, "kzalloc nuc900_rtc failed\n");
+             return -ENOMEM;
+     }
+     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+     if (!res) {
+             dev_err(&pdev->dev, "platform_get_resource failed\n");
+             err = -ENXIO;
+             goto fail1;
+     }
+
+     if (!request_mem_region(res->start, resource_size(res),
+                             pdev->name)) {
+             dev_err(&pdev->dev, "request_mem_region failed\n");
+             err = -EBUSY;
+             goto fail1;
+     }
+
+     nuc900_rtc->rtc_reg = ioremap(res->start, resource_size(res));
+     if (!nuc900_rtc->rtc_reg) {
+             dev_err(&pdev->dev, "ioremap rtc_reg failed\n");
+             err = -ENOMEM;
+             goto fail2;
+     }
+
+     nuc900_rtc->irq_num = platform_get_irq(pdev, 0);
+     if (request_irq(nuc900_rtc->irq_num, nuc900_rtc_interrupt,
+                             IRQF_DISABLED, "nuc900rtc", nuc900_rtc)) {
+             dev_err(&pdev->dev, "NUC900 RTC request irq failed\n");
+             err = -EBUSY;
+             goto fail3;
+     }
+
+     nuc900_rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev,
+                                             &nuc900_rtc_ops, THIS_MODULE);
+     if (IS_ERR(nuc900_rtc->rtcdev)) {

drivers/rtc/rtc-nuc900.c line 280

Quoted 10 lines
drivers/rtc/rtc-nuc900.c new file +10 -0
+             dev_err(&pdev->dev, "rtc device register faild\n");
+             err = PTR_ERR(nuc900_rtc->rtcdev);
+             goto fail4;
+     }
+
+     platform_set_drvdata(pdev, nuc900_rtc);
+     __raw_writel(__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_TSSR) | MODE24,
+                                     nuc900_rtc->rtc_reg + REG_RTC_TSSR);
+
+     dev_info(&pdev->dev, "NUC900 RTC device probe successfully\n");

 no banners, rtc framwork will announce the rtc

Quoted 24 lines
drivers/rtc/rtc-nuc900.c new file +24 -0
+     return 0;
+
+fail4:       free_irq(nuc900_rtc->irq_num, nuc900_rtc);
+fail3:       iounmap(nuc900_rtc->rtc_reg);
+fail2:       release_mem_region(res->start, resource_size(res));
+fail1:       kfree(nuc900_rtc);
+     return err;
+}
+
+static int __devexit nuc900_rtc_remove(struct platform_device *pdev)
+{
+     struct nuc900_rtc *nuc900_rtc = platform_get_drvdata(pdev);
+     struct resource *res;
+
+     rtc_device_unregister(nuc900_rtc->rtcdev);
+     free_irq(nuc900_rtc->irq_num, nuc900_rtc);
+     iounmap(nuc900_rtc->rtc_reg);
+
+     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+     release_mem_region(res->start, resource_size(res));
+
+     kfree(nuc900_rtc);
+
+     platform_set_drvdata(pdev, NULL);
Quoted 8 lines

drivers/rtc/rtc-nuc900.c line 311

Quoted 6 lines
drivers/rtc/rtc-nuc900.c new file +6 -0
+
+     return 0;
+}
+
+static struct platform_driver nuc900_rtc_driver = {
+     .remove         = __devexit_p(nuc900_rtc_remove),

 __devexit_p is incoherent with the definition below

Sir, I could not understand you regarding above comment ? and why ? If so anything can instead of the __devexit_p ?

Quoted 37 lines
Quoted 24 lines
drivers/rtc/rtc-nuc900.c new file +23 -1
+     .driver         = {
+             .name   = "nuc900-rtc",
+             .owner  = THIS_MODULE,
+     },
+};
+
+static int __init nuc900_rtc_init(void)
+{
+     return platform_driver_probe(&nuc900_rtc_driver, nuc900_rtc_probe);
+}
+
+static void __exit nuc900_rtc_exit(void)
+{
+     platform_driver_unregister(&nuc900_rtc_driver);
+}
+
+module_init(nuc900_rtc_init);
+module_exit(nuc900_rtc_exit);
+
+MODULE_AUTHOR("Wan ZongShun <[email protected]>");
+MODULE_DESCRIPTION("nuc910/nuc920 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-rtc");
--
Quoted 1 line

1.5.6.3

--

 Best regards,

 Alessandro Zummo,
 Tower Technologies - Torino, Italy

 http://www.towertech.it

Signature · 3 lines
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel